Closed CoderLogy closed 3 years ago
I suggest you run ~/pi-apps/uninstall
and follow the install procedures again.
No when I click install the apps donot get install
They eventually get refresh just not installed
No when I click install the apps donot get install
Your version of Pi-Apps is probably out of date. Please uninstall Pi-Apps, and then install Pi-Apps.
I have done but not at any result new version even installed I am using Raspberry Pi 3a+ please tell if I click install the page refresh nothing installs
On Tue 3 Nov, 2020, 7:13 PM Botspot, notifications@github.com wrote:
No when I click install the apps donot get install
Your version of Pi-Apps is probably out of date. Please uninstall Pi-Apps, and then install Pi-Apps.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Botspot/pi-apps/issues/52#issuecomment-721122610, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARCQFBLZRTSJ53VINK53L6TSOACGLANCNFSM4THN4IZA .
@CoderLogy What OS are you running? Is it Raspberry Pi OS Buster?
I am using Raspberry Pi OS Buster It's new and updated pls check why not working the os is officiall os made by Raspberry Pi
On Tue 3 Nov, 2020, 9:01 PM Botspot, notifications@github.com wrote:
@CoderLogy https://github.com/CoderLogy What OS are you running? Is it Raspberry Pi OS Buster?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Botspot/pi-apps/issues/52#issuecomment-721201187, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARCQFBMTNA6JVZM25OEKU6LSOAO67ANCNFSM4THN4IZA .
I am using Raspberry Pi OS Buster It's new and updated pls check why not working the os is officiall os made by Raspberry Pi
Okay, now please run this command in a terminal:
/home/pi/pi-apps/gui
That will run Pi-Apps as normal, but now the terminal will catch any errors.
Please copy out the full terminal output and post it here.
@CoderLogy Any updates?
Yes when did that what you told but there was error shown that no data found in terminal so pls help me in this
On Fri 6 Nov, 2020, 9:02 AM Botspot, notifications@github.com wrote:
@CoderLogy https://github.com/CoderLogy Any updates?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Botspot/pi-apps/issues/52#issuecomment-722789665, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARCQFBPDWVO7ZRAEZQ3UQXDSONU4PANCNFSM4THN4IZA .
Yes when did that what you told but there was error shown that no data found in terminal so pls help me in this
Sorry, I need more details than that. Could you send me a screenshot of the error?
Ok I will send it
On Tue 10 Nov, 2020, 3:50 AM Botspot, notifications@github.com wrote:
Yes when did that what you told but there was error shown that no data found in terminal so pls help me in this
Sorry, I need more details than that. Could you send me a screenshot of the error?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Botspot/pi-apps/issues/52#issuecomment-724312595, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARCQFBO2CJLGCSFXMMKMJTTSPBTJ5ANCNFSM4THN4IZA .
Hello, Same here, nothing is installed (using latest RP OS, Linux raspberrypi4 5.4.77-v8+)
I get this output:
xterm: bad command line option "--title=Installing Chromium Widevine"
usage: xterm [-/+132] [-C] [-Sccn] [-T string] [-/+ah] [-/+ai] [-/+aw]
[-b number] [-baudrate rate] [-/+bc] [-bcf milliseconds]
[-bcn milliseconds] [-bd color] [-/+bdc] [-bg color] [-bw number] [-/+cb]
[-cc classrange] [-/+cjk_width] [-class string] [-/+cm] [-/+cn] [-cr color]
[-/+cu] [-/+dc] [-display displayname] [-e command args ...] [-fa pattern]
[-fb fontname] [-/+fbb] [-/+fbx] [-fd pattern] [-fg color] [-fi fontname]
[-fn fontname] [-fs size] [-/+fullscreen] [-fw fontname] [-fwb fontname]
[-fx fontname] [%geom] [#geom] [-geometry geom] [-help] [-/+hm] [-/+hold]
[-iconic] [-/+ie] [-/+im] [-into windowId] [-/+itc] [-/+j] [-/+k8]
[-kt keyboardtype] [-/+l] [-/+lc] [-lcc path] [-leftbar] [-lf filename]
[-/+ls] [-/+maximized] [-/+mb] [-mc milliseconds] [-/+mesg] [-/+mk_width]
[-ms color] [-n string] [-name string] [-nb number] [-/+nul] [-/+pc]
[-/+pob] [-report-charclass] [-report-colors] [-report-fonts] [-rightbar]
[-/+rv] [-/+rvc] [-/+rw] [-/+s] [-/+samename] [-/+sb] [-selbg color]
[-selfg color] [-/+sf] [-sh number] [-/+si] [-/+sk] [-sl number] [-/+sm]
[-/+sp] [-/+t] [-ti termid] [-title string] [-tm string] [-tn name] [-/+u8]
[-/+uc] [-/+ulc] [-/+ulit] [-/+ut] [-/+vb] [-version] [-/+wc] [-/+wf]
[-xrm resourcestring] [-ziconbeep percent]
Type xterm -help for a full description.
@gilesn That is a very useful error output! Thanks for sharing.
Basically, whenever Pi-Apps wants to open a terminal, it uses a command called x-terminal-emulator
. This command launches the default terminal emulator for the OS.
Raspbian has lxterminal
as default.
TwisterOS uses xfce4-terminal
.
Other OS'es use mate-terminal
.
Apparently your OS uses xterm
.
Looks like xterm
doesn't know what to do with the --title
flag. Interesting.
Looks like I'll have to revisit the terminal-running code, and have it change the command based on which terminal x-terminal-emulator
chooses to use.
In the meantime @gilesn , you can set lxtermin
l back to being the default terminal by running this:
sudo apt install --reinstall lxterminal
Turns out #90 was caused by this same issue.
The OP in that issue report has lxterm
(xterm
, same thing) as their default terminal.
Okay, I think I've fixed this issue as of commit 7d37454bf1d6017e2d6247f0ad6a180cca45f71e.
Mine is more diffrent when I install it shows me that no data found in terminal as an error and nothing install
On Wed 25 Nov, 2020, 9:20 AM Botspot, notifications@github.com wrote:
Okay, I think I've fixed this issue as of commit a28ec27 https://github.com/Botspot/pi-apps/commit/a28ec27c733c536a72506feb7bfde62eff48551f .
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Botspot/pi-apps/issues/52#issuecomment-733445853, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARCQFBMZNJXPQXVX5LDFQADSRR5I5ANCNFSM4THN4IZA .
Okay, I think I've fixed this issue as of commit 7d37454bf1d6017e2d6247f0ad6a180cca45f71e.
Great, it's working so I'll leave my default terminal as-is.
Glad it worked for you @gilesn , and as for @CoderLogy , could you paste the error message? Or maybe a screenshot?
I was trying to install an app, any from Pi-apps list, and it says:
Using LXterminal:
cat: /home/pi/Downloads/git/pi-apps/data/status/FreeCAD: Directory or folder doesn't exist.
And running XTerm terminal instead:
Timestamp match.
Reading list file...
Of course, doesn't happen. Any app wasn't installing. Should I reinstall the Pi-app? How can I do that??
Also, trying installing Zoom: (using the same Xterm)
cat: /home/pi/Downloads/git/pi-apps/data/installed-packages/Zoom: Directory or folder doesn't exist.
cat: /home/pi/Downloads/git/pi-apps/data/status/Zoom: Directory or folder doesn't exist.
I was trying to install an app, any from Pi-apps list, and it says:
Using LXterminal:
cat: /home/pi/Downloads/git/pi-apps/data/status/Zoom: Directory or folder doesn't exist.
And running XTerm terminal instead:
Timestamp match.
Reading list file...
Of course, doesn't happen. Any app wasn't installing. Should I reinstall the Pi-app? How can I do that??
Unfortunately, neither of those error messages is particularly helpful.
@fabianmendes Could you try installing Pi-Apps using the official install instructions?
git clone https://github.com/Botspot/pi-apps
~/pi-apps/install
Sure, I will. Thanks for replying so fast!! Otherwise, I've just edited my last comment. May you please look forward to it?
I'll run that code.:
I was trying to install an app, any from Pi-apps list, and it says: Using LXterminal:
cat: /home/pi/Downloads/git/pi-apps/data/status/Zoom: Directory or folder doesn't exist.
And running XTerm terminal instead:Timestamp match.
Reading list file...
Of course, doesn't happen. Any app wasn't installing. Should I reinstall the Pi-app? How can I do that??Unfortunately, neither of those error messages is particularly helpful. @fabianmendes Could you try installing Pi-Apps using the official install instructions?
git clone https://github.com/Botspot/pi-apps ~/pi-apps/install
should I reinstall the already installed apps? (They appear on the GUI Pi-Apps as they aren't installed)
should I reinstall the already installed apps? (They appear on the GUI Pi-Apps as they aren't installed)
No, they are actually installed, but Pi-Apps doesn't know better.
Simply copy over your old data directory from your old location to the new one. Something like this:
gio trash /home/pi/pi-apps/data/status
cp -a /home/pi/Downloads/git/pi-apps/data/status /home/pi/pi-apps/data
The first command moves the empty data directory to Trash, and the command command copies the new version.
It's happening the same thing :L
And at first, I've tried to install TBOplayer, and on the very first try it said Permisson Denied, then I've run Pi-apps GUI from the terminal using sudo, and then try out to install TBOplaye again but it gave me the next same message:
cat: /home/pi/Downloads/git/pi-apps/data/status/TBOPlaye: Directory or folder doesn't exist.
(I'm trying to install ZOOM and TBOPlayer)
| Ok, sure:
should I reinstall the already installed apps? (They appear on the GUI Pi-Apps as they aren't installed)
No, they are actually installed, but Pi-Apps doesn't know better.
Simply copy over your old data directory from your old location to the new one. Something like this:
gio trash /home/pi/pi-apps/data/status cp -a /home/pi/Downloads/git/pi-apps/data/status /home/pi/pi-apps/data
The first command moves the empty data directory to Trash, and the command command copies the new version.
Nevermind! Seems to be an Internet Connection problem!!
It's installing now, thank you @Botspot !
cat: /home/pi/Downloads/git/pi-apps/data/status/TBOPlaye: Directory or folder doesn't exist.
That's strange. Did you select TBOPlayer from the Pi-Apps list, and then click the Install button?
Sorry, excuse me. Where should I see Zoom after installing it? There is not in any category from my Raspberry Pi menu :$
Sorry, excuse me. Where should I see Zoom after installing it? There is not in any category from my Raspberry Pi menu :$
Maybe it didn't install correctly. Please open a new issue for that.
My problem I am able to download but problem is I have downloaded libreelec it doesn't show on screen after install and also it cosnsumed lot of space even after I have deleted it
On Thu 26 Nov, 2020, 7:52 PM Botspot, notifications@github.com wrote:
Sorry, excuse me. Where should I see Zoom after installing it? There is not in any category from my Raspberry Pi menu :$
Maybe it didn't install correctly. Please open a new issue for that.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Botspot/pi-apps/issues/52#issuecomment-734325524, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARCQFBNJ66MEYDEEKVVZJGTSRZQD7ANCNFSM4THN4IZA .
My problem I am able to download but problem is I have downloaded libreelec it doesn't show on screen after install and also it cosnsumed lot of space even after I have deleted it
@coderlogy Sounds like you are talking about libreelec os.
How is this related to Pi-Apps?
It's not libreelec os I am talking about libreelec pcb pls solve my problem
I haven't found anybody who understands what @CoderLogy is talking about, so I'm closing this issue for now.
@CoderLogy if you're still having a problem with Pi-Apps, please open a new issue and explain exactly what is going on for you.
Ok
On Sat 5 Dec, 2020, 3:57 AM Botspot, notifications@github.com wrote:
I haven't found anybody who understands what @CoderLogy https://github.com/CoderLogy is talking about, so I'm closing this issue for now.
@CoderLogy https://github.com/CoderLogy if you're still having a problem with Pi-Apps, please open a new issue and explain exactly what is going on for you.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Botspot/pi-apps/issues/52#issuecomment-739056896, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARCQFBIWHZBOHAH6BVTPA63STFO4DANCNFSM4THN4IZA .
Close it my problem solved
On Fri 11 Dec, 2020, 7:27 PM Programmer Shourya, < programmershourya@gmail.com> wrote:
Ok
On Sat 5 Dec, 2020, 3:57 AM Botspot, notifications@github.com wrote:
I haven't found anybody who understands what @CoderLogy https://github.com/CoderLogy is talking about, so I'm closing this issue for now.
@CoderLogy https://github.com/CoderLogy if you're still having a problem with Pi-Apps, please open a new issue and explain exactly what is going on for you.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Botspot/pi-apps/issues/52#issuecomment-739056896, or unsubscribe https://github.com/notifications/unsubscribe-auth/ARCQFBIWHZBOHAH6BVTPA63STFO4DANCNFSM4THN4IZA .
Do any errors show up when you click install?
Also, is your Pi-Apps fully up-to-date?