A pure Rust implementation of the Snappy compression algorithm. Includes streaming compression and decompression using the Snappy frame format. This implementation is ported from both the reference C++ implementation and the Go implementation.
Licensed under the BSD 3-Clause.
Add this to your Cargo.toml
:
[dependencies]
snap = "1"
stdin
This program reads data from stdin
, compresses it and emits it to stdout
.
This example can be found in examples/compress.rs
:
use std::io;
fn main() {
let stdin = io::stdin();
let stdout = io::stdout();
let mut rdr = stdin.lock();
// Wrap the stdout writer in a Snappy writer.
let mut wtr = snap::write::FrameEncoder::new(stdout.lock());
io::copy(&mut rdr, &mut wtr).expect("I/O operation failed");
}
stdin
This program reads data from stdin
, decompresses it and emits it to stdout
.
This example can be found in examples/decompress.rs
:
use std::io;
fn main() {
let stdin = io::stdin();
let stdout = io::stdout();
// Wrap the stdin reader in a Snappy reader.
let mut rdr = snap::read::FrameDecoder::new(stdin.lock());
let mut wtr = stdout.lock();
io::copy(&mut rdr, &mut wtr).expect("I/O operation failed");
}
szip
is a tool with similar behavior as gzip
, except it uses Snappy
compression. It can be installed with Cargo:
$ cargo install szip
To compress a file, run szip file
. To decompress a file, run
szip -d file.sz
. See szip --help
for more details.
This crate is tested against the reference C++ implementation of Snappy. Currently, compression is byte-for-byte equivalent with the C++ implementation. This seems like a reasonable starting point, although it is not necessarily a goal to always maintain byte-for-byte equivalence.
Tests against the reference C++ implementation can be run with
cargo test --features cpp
. Note that you will need to have the C++ Snappy
library in your LD_LIBRARY_PATH
(or equivalent).
To run tests, you'll need to explicitly run the test
crate:
$ cargo test --manifest-path test/Cargo.toml
To test that this library matches the output of the reference C++ library, use:
$ cargo test --manifest-path test/Cargo.toml --features cpp
Tests are in a separate crate because of the dependency on the C++ reference library. Namely, Cargo does not yet permit optional dev dependencies.
This crate's minimum supported rustc
version is 1.39.0
.
The current policy is that the minimum Rust version required to use this crate
can be increased in minor version updates. For example, if crate 1.0
requires
Rust 1.20.0, then crate 1.0.z
for all values of z
will also require Rust
1.20.0 or newer. However, crate 1.y
for y > 0
may require a newer minimum
version of Rust.
In general, this crate will be conservative with respect to the minimum supported version of Rust.
The performance of this implementation should roughly match the performance of the C++ implementation on x86_64. Below are the results of the microbenchmarks (as defined in the C++ library):
group snappy/cpp/ snappy/snap/
----- ----------- ------------
compress/zflat00_html 1.00 94.5±0.62µs 1033.1 MB/sec 1.02 96.1±0.74µs 1016.2 MB/sec
compress/zflat01_urls 1.00 1182.3±8.89µs 566.3 MB/sec 1.04 1235.3±11.99µs 542.0 MB/sec
compress/zflat02_jpg 1.00 7.2±0.11µs 15.9 GB/sec 1.01 7.3±0.06µs 15.8 GB/sec
compress/zflat03_jpg_200 1.10 262.4±1.84ns 727.0 MB/sec 1.00 237.5±2.95ns 803.2 MB/sec
compress/zflat04_pdf 1.02 10.3±0.18µs 9.2 GB/sec 1.00 10.1±0.16µs 9.4 GB/sec
compress/zflat05_html4 1.00 399.2±5.36µs 978.4 MB/sec 1.01 404.0±2.46µs 966.8 MB/sec
compress/zflat06_txt1 1.00 397.3±2.61µs 365.1 MB/sec 1.00 398.5±3.06µs 364.0 MB/sec
compress/zflat07_txt2 1.00 352.8±3.20µs 338.4 MB/sec 1.01 355.2±5.01µs 336.1 MB/sec
compress/zflat08_txt3 1.01 1058.8±6.85µs 384.4 MB/sec 1.00 1051.8±6.74µs 386.9 MB/sec
compress/zflat09_txt4 1.00 1444.1±8.10µs 318.2 MB/sec 1.00 1450.0±13.36µs 316.9 MB/sec
compress/zflat10_pb 1.00 85.1±0.58µs 1328.6 MB/sec 1.02 87.0±0.90µs 1300.2 MB/sec
compress/zflat11_gaviota 1.07 311.9±4.27µs 563.5 MB/sec 1.00 291.9±1.86µs 602.3 MB/sec
decompress/uflat00_html 1.03 36.9±0.28µs 2.6 GB/sec 1.00 36.0±0.25µs 2.7 GB/sec
decompress/uflat01_urls 1.04 437.4±2.89µs 1530.7 MB/sec 1.00 419.9±3.10µs 1594.6 MB/sec
decompress/uflat02_jpg 1.00 4.6±0.05µs 24.9 GB/sec 1.00 4.6±0.03µs 25.0 GB/sec
decompress/uflat03_jpg_200 1.08 122.4±1.06ns 1558.6 MB/sec 1.00 112.8±1.35ns 1690.8 MB/sec
decompress/uflat04_pdf 1.00 5.7±0.05µs 16.8 GB/sec 1.10 6.2±0.07µs 15.3 GB/sec
decompress/uflat05_html4 1.01 164.1±1.71µs 2.3 GB/sec 1.00 162.6±2.16µs 2.3 GB/sec
decompress/uflat06_txt1 1.08 146.6±1.01µs 989.5 MB/sec 1.00 135.3±1.11µs 1072.0 MB/sec
decompress/uflat07_txt2 1.09 130.2±0.93µs 916.6 MB/sec 1.00 119.2±0.96µs 1001.8 MB/sec
decompress/uflat08_txt3 1.07 387.2±2.30µs 1051.0 MB/sec 1.00 361.9±6.29µs 1124.7 MB/sec
decompress/uflat09_txt4 1.09 536.1±3.47µs 857.2 MB/sec 1.00 494.0±5.05µs 930.2 MB/sec
decompress/uflat10_pb 1.00 32.5±0.19µs 3.4 GB/sec 1.05 34.0±0.48µs 3.2 GB/sec
decompress/uflat11_gaviota 1.00 142.1±2.05µs 1236.7 MB/sec 1.00 141.5±0.92µs 1242.3 MB/sec
Notes: These benchmarks were run with Snappy/C++ 1.1.8. Both the C++ and Rust benchmarks were run with the same benchmark harness. Benchmarks were run on an Intel i7-6900K.
Additionally, here are the benchmarks run on the same machine from the Go implementation of Snappy (which has a hand rolled implementation in Assembly). Note that these were run using Go's microbenchmark tool, so the numbers may not be directly comparable, but they should serve as a useful signpost:
Benchmark_UFlat0 25040 45180 ns/op 2266.49 MB/s
Benchmark_UFlat1 2648 451475 ns/op 1555.10 MB/s
Benchmark_UFlat2 229965 4788 ns/op 25709.01 MB/s
Benchmark_UFlat3 11355555 101 ns/op 1973.65 MB/s
Benchmark_UFlat4 196551 6055 ns/op 16912.64 MB/s
Benchmark_UFlat5 6016 189219 ns/op 2164.68 MB/s
Benchmark_UFlat6 6914 166371 ns/op 914.16 MB/s
Benchmark_UFlat7 8173 142506 ns/op 878.41 MB/s
Benchmark_UFlat8 2744 436424 ns/op 977.84 MB/s
Benchmark_UFlat9 1999 591141 ns/op 815.14 MB/s
Benchmark_UFlat10 28885 37291 ns/op 3180.04 MB/s
Benchmark_UFlat11 7308 163366 ns/op 1128.26 MB/s
Benchmark_ZFlat0 12902 91231 ns/op 1122.43 MB/s
Benchmark_ZFlat1 997 1200579 ns/op 584.79 MB/s
Benchmark_ZFlat2 136762 7832 ns/op 15716.53 MB/s
Benchmark_ZFlat3 4896124 245 ns/op 817.27 MB/s
Benchmark_ZFlat4 117643 10129 ns/op 10109.44 MB/s
Benchmark_ZFlat5 2934 394742 ns/op 1037.64 MB/s
Benchmark_ZFlat6 3008 382877 ns/op 397.23 MB/s
Benchmark_ZFlat7 3411 344916 ns/op 362.93 MB/s
Benchmark_ZFlat8 966 1057985 ns/op 403.36 MB/s
Benchmark_ZFlat9 854 1429024 ns/op 337.20 MB/s
Benchmark_ZFlat10 13861 83040 ns/op 1428.08 MB/s
Benchmark_ZFlat11 4070 293952 ns/op 627.04 MB/s
To run benchmarks, including the reference C++ implementation, do the following:
$ cd bench
$ cargo bench --features cpp -- --save-baseline snappy
To compare them, as shown above, install
critcmp
and run (assuming you saved the baseline above under the name snappy
):
$ critcmp snappy -g '.*?/(.*$)'
Finally, the Go benchmarks were run with the following command on commit
ff6b7dc8
:
$ go test -cpu 1 -bench Flat -download
snappy
- These are bindings to the C++ library. No support for the Snappy
frame format.snappy_framed
- Implements the Snappy frame format on top of the snappy
crate.rsnappy
- Written in pure Rust, but lacks documentation and the Snappy
frame format. Performance is unclear and tests appear incomplete.snzip
- Was created and immediately yanked from crates.io.