CCAZE31 ardupilot-mega issues

CCAZE31 / ardupilot-mega

Automatically exported from code.google.com/p/ardupilot-mega

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

APM update routine aborts

#781 GoogleCodeExporter closed 8 years ago
2
3DR 915Mhz Radio Link not re-established after brown out

#780 GoogleCodeExporter opened 8 years ago
1
APM Planner will crash when USB connection unplugged when active

#779 GoogleCodeExporter closed 8 years ago
7
APM Planner Setup Wizard ended prematurely

#778 GoogleCodeExporter closed 8 years ago
5
Add energy_error to telemetry log

#777 GoogleCodeExporter opened 8 years ago
0
Altitude not taken into account at waypoints

#776 GoogleCodeExporter opened 8 years ago
3
Sonar use for ardupilot

#775 GoogleCodeExporter opened 8 years ago
3
APM Planner distance to MAV request

#774 GoogleCodeExporter closed 8 years ago
3
APM Planner screen layout issue

#773 GoogleCodeExporter closed 8 years ago
4
Flaperons on r/c radio could lead to crash if plane is in auto mode

#772 GoogleCodeExporter opened 8 years ago
2
Units in configuration for different speeds are not consistent

#771 GoogleCodeExporter closed 8 years ago
2
Thermal compensation for current sensor

#770 GoogleCodeExporter opened 8 years ago
1
Joystick endpoints messed up

#769 GoogleCodeExporter closed 8 years ago
6
APM Aerial Tracker improvement

#768 GoogleCodeExporter opened 8 years ago
11
For Auto landing, provision of automated approach waypoints feature should be there in Mission Planner

#767 GoogleCodeExporter opened 8 years ago
1
In MP1212, Distance traveled is shown incorrectly

#766 GoogleCodeExporter closed 8 years ago
3
mission starts by heading to waypoint zero

#765 GoogleCodeExporter closed 8 years ago
2
Auto WP - Grid and Gridv2 variable command.

#764 GoogleCodeExporter opened 8 years ago
5
MOre flexible handling of RC signal loss.

#763 GoogleCodeExporter opened 8 years ago
0
Arduplane 2.63 : RC Loss causes max aileron, spiraling to ground. and circle instead of RTL

#762 GoogleCodeExporter closed 8 years ago
5
Mission planner 1.2.12 won't run on debian.

#761 GoogleCodeExporter closed 8 years ago
9
Mission Planner 1.2.12 crashes during start in Mono.

#760 GoogleCodeExporter closed 8 years ago
6
Mono System.TypeLoadException in Ubuntu

#759 GoogleCodeExporter closed 8 years ago
6
CONDITION_CHANGE_ALT

#758 GoogleCodeExporter opened 8 years ago
0
"Issue attachment storage quota exceeded."- unable to attach to reports.

#757 GoogleCodeExporter opened 8 years ago
3
APM 2.5 fails to boot unless some sort of telemetry is attached.

#756 GoogleCodeExporter opened 8 years ago
3
Airspeed on APM 2.5 - not working after Arduplane 2.60

#755 GoogleCodeExporter opened 8 years ago
3
MP 1.2.11 - Old firmware selection does not work in Mono

#754 GoogleCodeExporter closed 8 years ago
4
"Is this APM 2" - question during flashing...

#753 GoogleCodeExporter closed 8 years ago
1
Enhancement request

#752 GoogleCodeExporter closed 8 years ago
2
Values not matching under different configuration panels on MP 1.2.11

#751 GoogleCodeExporter opened 8 years ago
0
1.2.11 wont start in Mono

#750 GoogleCodeExporter closed 8 years ago
4
Mission Planner will not record EZ cap video source with HUD Overlay Box Checked

#749 GoogleCodeExporter opened 8 years ago
4
Patch for /libraries/AC_PID/examples/AC_PID_test/AC_PID_test.pde

#748 GoogleCodeExporter opened 8 years ago
0
ArdupilotMegaPlanner10.exe won't start under Mac OS X and Mono

#747 GoogleCodeExporter closed 8 years ago
4
Doesn't remember user settings for HUD

#746 GoogleCodeExporter closed 8 years ago
2
Airspeed has an effect on level

#745 GoogleCodeExporter closed 8 years ago
4
MinimOSD firmware/bootloader missing

#744 GoogleCodeExporter closed 8 years ago
1
no input data from XPLANE 9 shown in AP 2.6.1 / AC 2.7.3 MissonPlanner 1.2.11

#743 GoogleCodeExporter opened 8 years ago
1
unable to use ext. GPS

#742 GoogleCodeExporter opened 8 years ago
0
arduplane software doesn't recognise Mediatek GPS using 1280 board

#741 GoogleCodeExporter closed 8 years ago
2
Patch for /libraries/AP_GPS/AP_GPS_NMEA.cpp

#740 GoogleCodeExporter closed 8 years ago
2
Mission planner streaming video does not work in Mono (Linux)

#739 GoogleCodeExporter closed 8 years ago
3
Graph telemetry signal strength?

#738 GoogleCodeExporter opened 8 years ago
3
Enhancement Request: Summarize the resolution of the Quick numbers

#737 GoogleCodeExporter closed 8 years ago
3
Distance to UAV, displayed by the MP1210 & even MP1211, is totally wrong.

#736 GoogleCodeExporter opened 8 years ago
2
Can't set APPROACH_ALT to 0 in "Standard Params" GUI

#735 GoogleCodeExporter closed 8 years ago
2
APM Planner not remembering telemetry link settings

#734 GoogleCodeExporter closed 8 years ago
3
Mission planner: Takeoff command altitude error

#733 GoogleCodeExporter closed 8 years ago
2
Error launching APM

#732 GoogleCodeExporter closed 8 years ago
4

Previous Next