You need at least version 3.7.3. Refer this link to install GNU Radio https://gnuradio.org/redmine/projects/gnuradio/wiki/InstallingGR
gr-spread: https://bitbucket.org/daulpavid/gr-spread
gr-cdma: https://github.com/anastas/gr-cdma
gr-802.15.4: https://github.com/bastibl/gr-ieee802-15-4
gr-802.11: https://github.com/bastibl/gr-ieee802-11
The dependencies and installation intructions are provided in the above links.
Contains the grc files which are used as a base for constructing the flowgraphs. The generated python files from the flowgraphs are further edited to configure them according to device specifications.
Contains flow graphs and scripts to record and packpay the behavior of the devices used which are specified above. The RX and TX Gain, Bandwidth and the Sampling rate is configured according to the device specifications. The distance between the device and USRP is 2mts.
Contains the scripts to generate and control the interference of prevalent wireless devices operating in the 2.4GHz ISM band
Run the ./cigusrp.sh to know the devices present and configuartion of the CIG.
Contains the scripts to configure Raspberry Pi as a traffic generator of ZigBee, WiFi, Bluetooth and BLE.
Run ./cig-rpi to configure the Raspberry Pi as a traffic generator