Check out this thread before printing the parts: https://github.com/CarlosGS/Cyclone-PCB-Factory/issues/57
Also take a look at the following locations:
If you are interested in this project, please consider joining our mail list:
English: https://groups.google.com/forum/#!forum/cyclone-pcb-factory
Spanish/Español: https://groups.google.com/forum/#!forum/cyclone-pcb-factory-es
Install git (http://git-scm.com/) onto your system. Then run a clone:
git clone git://github.com/carlosgs/Cyclone-PCB-Factory.git
This will download the latest sources into a directory named 'Cyclone-PCB-Factory'.
Current stable version: 2.1
--
Recent news:
Cyclone PCB Factory V2.0 was developed in the department of innovation and robotics at bq
V2.0 addressed all the issues from the original design, and implementing improvements by yOPERO, Martin Zabojnik and others:
Videos
--
October 2015. Full milling process with bCNC, by Carlosgs: https://www.youtube.com/watch?v=tWrt1B1CeP0
September 2015. Cyclone PCB jogging and homing test with bCNC, by Ianmcmill: https://www.youtube.com/watch?v=GqbSjCq_hWg
July 2015. v2.0 Milling a PCB, timelapse by Helicon007: https://www.youtube.com/watch?v=GpFG2Z8Jt-w
April 2015. Cyclone PCB Factory belt drive, by Nihilianth: https://www.youtube.com/watch?v=bdu1vz6ndGs
April 2015. Introduction & assembly tips, by Project23D: https://www.youtube.com/watch?v=0mW087ijIdE
v2.0 Plexiglass "Open Source Hardware" keychain: http://www.youtube.com/watch?v=3Kftgog89wQ
v2.0 Cyclone Logo in PCB (October 2014): http://www.youtube.com/watch?v=_6oWuco_N8U
v2.0a Plexiglass Cyclone logo (August 2014): http://www.youtube.com/watch?v=lPQlIvBf7Ak
v2.0a Milling wax (August 2014): http://www.youtube.com/watch?v=drV_r_OSsi4
February 2014. First drawing test with the Cyclone PCB Factory CNC, by Samuel Ureta: https://www.youtube.com/watch?v=F7SczbShmxA
December 2013. Adjustment of Cyclone PCB Factory Y Stepper Motor Current, by Glen Chung: https://www.youtube.com/watch?v=-TPqWOsY0Ls
v0.9.7 Cyclone PCB factory, the process (June 2013): http://www.youtube.com/watch?v=fKW3fwy1h0k
v0.9.6 Y axis concept by yOPERO http://www.youtube.com/watch?v=XzcobonQP40
v0.9.5 Probing a PCB http://www.youtube.com/watch?v=m5zXL8k5T9E
v0.9.5 Milling MDF http://www.youtube.com/watch?v=2QpxjheEjEc and http://www.youtube.com/watch?v=zjav0hBtmYA
v0.8 Drawing test: http://www.youtube.com/watch?v=Y-HSdE89JOM
v0.7.5 XY axis test: http://www.youtube.com/watch?v=9umlq4oHG64
v0.7.5 High speed XY test: http://www.youtube.com/watch?v=H3uYCXryj60
October 2015. Evolution of the Cyclone-PCB-Factory GitHub repository (Gource Visualization), by Landon Wilkins: https://www.youtube.com/watch?v=0ANaGCHkaco
More pictures
--
License: Attribution - Share Alike - Creative Commons (http://creativecommons.org/licenses/by-sa/3.0/)
Carlos García Saura (http://github.com/CarlosGS) released the project as open-source and is the current maintainer.
Many other people keeps contributing to the project (check GitHub contributions and "most active posters" at https://groups.google.com/forum/#!aboutgroup/cyclone-pcb-factory).
Special thanks
--
Credit for the ideas used
--
The origin of Cyclone took place while I (carlosgs) was inside the Panda CNC community (https://plus.google.com/u/0/communities/102402711800402614517). This is from December 2012 to mid-February 2013.
Here is the credit for the ideas that were used:
Please note I have taken screenshots of the post that are on the closed G+ Panda community (https://plus.google.com/u/0/communities/116318709564872967169). You can register and see by yourself.
All other development present on Cyclone has nothing to do with Panda and is not related to the Panda project.
This hardware/software is provided "as is", and you use the hardware/software at your own risk. Under no circumstances shall any author be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if the authors have been advised of the possibility of such damages.
Garcia-Saura, C. (2013). Cyclone PCB Factory. GitHub. https://doi.org/10.5281/ZENODO.10442930
Latex / Bibtex citation:
@misc{cyclonepcb2013,
author = {Garcia-Saura, Carlos},
title = {Cyclone PCB Factory},
publisher = {GitHub},
year = {2013},
doi = {10.5281/ZENODO.10442930},
url = {https://doi.org/10.5281/ZENODO.10442930}
}