search

ChaiByte / CF-Tunnel-Transparent-Proxy

Demo: Proxy to build stable connection with Cloudflare Tunnel
15 stars 0 forks source link

readme

CF-Tunnel-Transparent-Proxy

sequenceDiagram
    participant A as Cloudflared Local (123.125.114.144)
    participant B as Proxy (133.130.96.1)
    participant C as Cloudflare Network (198.41.192.0/24)
    participant D as Data Centers
    A-->>C: Request connector according to IP (In cloudflared view)
    A->>B: Request as above
    Note over A,B: redirect OUTPUT to localhost:port 
    Note over A,B: route localhost:port to Proxy
    B->>C: Request, but from me XD
    Note over B,C: followRedirect
    C->>D: Wow, request from 133.130.96.1
    D->>C: Returns connector nearest Proxy
    C->>A: Returns connector directly
    A->>D: Establishes tunnel communication with connector
    Note over A,D: Proxy is not active util next check

This project is a simplest example showing how to use a transparent proxy when cloudflared select endpoint in a data center to establish the tunnel connection. I assume you have already known what is Cloudflare Zero Trust and how to use it. Why and when use a transparent proxy? Different people have different reasons. Of cousre, you need have another satisfied machine as the proxy server.

Test environment:

Use Docker as the runtime environment to make it easier to run on different platforms.

For someone who can not access the docker hub, these offical documents may be helpful:

How to use

Run Locally without Proxy First

  1. Install Docker and configure it.
  2. Clone this repository and change to local directory.
  3. Modify TUNNEL_TOKEN in .env file.
  4. Run docker compose up and check the log.

Currently, the status of your tunnel should be Healthy if connection is successful. We have not proxy it yet.

cloudflared connects to cloudflare’s global network on addresses 198.41.192.0/24, 198.41.200.0/24 (see Tunnel with firewall) port 7844. Then it selects a data center to establish tunnel connection and give the location information. Sometimes the connection between your machine and selected data center is not stable. But the location could change after using a proxy server (that's a reason). Ideally http and socks proxy should be supported by cloudflare Tunnel directly. Unfortunately, it's not supported at the moment.

Redirect Cloudflare Traffic (eg. Netfilter)

A workround for Linux system is:

A shell script iptable.sh is provided to add and delete the rules.

Feel free to change the port number to any valid one. And we will re-configure it in xray later.

Once you add Cloudflare rules, you may notice that your machine cannot connect to the Cloudflare network. This is the effect of redirection. The target is set as 127.0.0.1 as default. We will change target to the proxy server later. So just add the rules right now. Let's configure the proxy server to work in conjunction with redirection.

Configure the Proxy Server

Login to your proxy server and follow the steps below:

  1. Install Docker and configure it.
  2. Clone this repository and change to proxy directory.
  3. Edit the configuration in config.json.
    • Change inbound port number (10086 as default) to any valid one.
    • Change id to a new UUID (run uuidgen to get one).
  4. Run docker compose up -d to run it detached.
  5. Run docker logs -f cf-tunnel-xray to watch the xray log.
Xray 1.8.13 (Xray, Penetrates Everything.) Custom (go1.22.3 linux/amd64)
A unified platform for anti-censorship.
2024/06/16 14:06:32 [Info] infra/conf/serial: Reading config: /etc/xray/config.json
2024/06/16 14:06:32 [Debug] app/log: Logger started
2024/06/16 14:06:32 [Debug] app/proxyman/inbound: creating stream worker on 0.0.0.0:10086
2024/06/16 14:06:32 [Info] transport/internet/tcp: listening TCP on 0.0.0.0:10086
2024/06/16 14:06:32 [Warning] core: Xray 1.8.13 started

Now proxy server is ready. Take note of its IP (not 0.0.0.0 above!), port number and UUID.

Start Local Tunnel with Proxy

  1. Switch to local machine and change to local directory.
  2. Edit the outbound configuration in config.json.
    • Change listen port (12306 as default) to the port you set in iptable.
    • Change IP (127.0.0.1 as default) to accessible IP of your proxy server.
    • Change port (10086 as default) to inbound of your proxy server.
    • Change id to inbound acceptable UUID of your proxy server.
  3. Run docker compose down to stop the current tunnel and xray.
  4. Run docker compose up to check the log to verify temporary.
cf-tunnel-xray         | 2024/06/16 14:16:19 [Debug] 
transport/internet: dialing to tcp:123.123.123.123:10086

Here 123.123.123.123 should be your proxy server IP.

And you might find the endpoint location changed according to the proxy server. The log will show the connection with which endpoint is established.

Now all things are done. Run docker compose up -d to run it detached.

If you want to check log file when running:

Read debug level logs could help your understand the details.

Add Hosts to Local Machine (Optional)

cloudflared connects to certain IP addresses on port 443 to enable some optional features.

These IP addresses are in the 104.X.X.X range and can be added to your /etc/hosts file to potentially speed up the connection:

104.16.105.127    api.cloudflare.com
104.16.105.127    update.argotunnel.com
104.16.105.127    pqtunnels.cloudflareresearch.com
104.16.105.127    pqtunnels.cloudflareresearch.com

The address 104.16.105.127 was chosen based on the results from CloudflareSpeedTest result.

What Next?

This project use vmess as the protocol to communicate with the proxy server. You can cerfiticate the proxy server and use tls to secure the connection. But it may be a little complex for beginners, just for who has already known how to do it.

FAQ

Will be added if any.

Acknowledgement