Faceshields

This repository is to keep track of novel designs of face mask for medical professional to use in critical times

At this time these files are not meant to be mass produced in anyway. As of right now, this is for prototyping different designs.

March 22nd Print

We are currently printing the Face Shield and can be found in the PrusaFaceShield file.

Resources:

Prusa Face Shield

https://blog.prusaprinters.org/from-design-to-mass-3d-printing-of-medical-shields-in-three-days/

Other Designs to think about (May be easier to print?):

https://www.scmp.com/news/hong-kong/health-environment/article/3052135/polytechnic-university-lab-3d-printing-face

https://www.coxhealth.com/innovation/

Working Fusion Models:

-Live Link Prusa Bottom Reinforcement (original, for .5mm thick material) https://a360.co/2UbwLO5
-Live Link Prusa Bottom Reinforcement (for 1.5mm thick material) https://a360.co/2QEyNnK
-Believe this one should be a spot on replica, easy to alter the underlying sketches and file if needed
-Live Link Prusa RC2 https://a360.co/3beMKk8
-More straight lines in this model, much easier to sketch. Haven't test any prints, but model seems to be correct.
-Live Link Prusa RC1 https://a360.co/2QAGLOJ