Cumulocity Linux Agent

Cumulocity Linux agent is a generic agent for connecting Linux-powered devices to Cumulocity's IoT platform. It runs on all major Linux distributions (Ubuntu, Debian, Raspberry Pi OS, CentOS, etc.).

Current Features

Periodically report memory usage to Cumulocity.
Periodically report system load to Cumulocity.
Send log files (dmesg, syslog, journald, agent log) to Cumulocity on demand.
Modbus-TCP and Modbus-RTU
CANopen (using SocketCAN interface)
Monitoring
Cloud Remote Access for remotely accessing assets via VNC/Telnet/SSH protocols

How to build the agent?

Prerequisites:
- Linux (>= 2.6.32)
- liblua (>= 5.1)
- libcurl (>= 7.57.0)
- Systemd (optional, for automatically starting the agent on boot)
- LuaSocket (optional, only for the use of CANopen)
Build the Cumulocity C++ library with the default Makefile and common.mk as init.mk.
Download the agent source code:

git clone git@bitbucket.org:m2m/cumulocity-agents-linux.git

Export the Cumulocity C++ library path (add the following code to your ~/.bashrc for permanence):

export C8Y_LIB_PATH=/library/root/path

Copy the compiled library files to the lib/ directory under the agent root directory.

cd cumulocity-agents-linux
cp -rP $C8Y_LIB_PATH/lib $C8Y_LIB_PATH/bin .

Build the agent:
```
make # in *debug* mode:
```

make release # in *release* mode:

Install the agent:
```
sudo make install
```
Run the agent:

sudo cumulocity-agent

Or for Linux distributions with systemd:

sudo systemctl enable cumulocity-agent
sudo systemctl start cumulocity-agent

How to enable Modbus support in the agent

Modbus support is by default disabled. To enable modbus support, you need to edit the Makefile to setPLUGIN_MODBUS:=1. The modbus feature requires libmodbus library, make sure you have libdmobus installed before build with modbus support.

Also, add modbus to the following line in cumulocity-agent.conf:

lua.plugins=system,logview,shell,version,modbus

How to enable CANopen support in the agent

CANopen is composed of two parts. A Lua plugin, which is included into the agent build by default. However, to actually get CANopen support, you would also need to build the Cumulocity CANopen service, which is a C program based on the CANopen library and SocketCAN connector from Port Automation.

The CANopen library and SocketCAN connector is commercially licensed by port industrial automation GmbH, and are not included in the repo. You would need to get them from Port if you want to build the Cumulocity CANopen service.

Assume you have the CANopen library and SocketCAN connector available, you need to create a directory ext/port in the repo and exatrct the zip files there. After the extracion, your ext/port folder should have the following strcture:

$ ls -hl ext/port/
drwxr-xr-x 1 tiens tiens   44 Nov 27 16:45 canopen
drwxr-xr-x 1 tiens tiens   80 Nov 27 16:45 drivers
$ ls -hl ext/port/canopen
-rw-r--r-- 1 tiens tiens 11K Nov 27 16:45 CHANGELOG
drwxr-xr-x 1 tiens tiens 664 Nov 27 16:45 include
drwxr-xr-x 1 tiens tiens 834 Nov 27 16:45 source
$ ls -hl ext/port/drivers
-rw-r--r-- 1 tiens tiens  21K Nov 27 16:45 CHANGELOG_DRV
drwxr-xr-x 1 tiens tiens   92 Nov 27 16:45 linux
-rw-r--r-- 1 tiens tiens 7.3K Nov 27 16:45 README
drwxr-xr-x 1 tiens tiens  206 Nov 27 16:45 shar_inc
drwxr-xr-x 1 tiens tiens  106 Nov 27 16:45 shar_src

To build and run the Cumulocity CANopen service:

$ cd canopen
$ make
$ cd ..
$ ./bin/c8y_canopend

The Cumulocity CANopen service needs NO configuration. It's communicating with the Linux Agent via UDP port 9677. It gets all configuration, including SocketCAN interface, baudrate etc. automatically from the Linux Agent, so you just need to adjust all the CANopen settings in the Linux Agent.

There is also a CANopen simulator included in the repo for testing purpose. To build and run it:

$ cd tools/canopen_simulator
$ make
$ ./c8y_canopen_simulator 5 0

Note 5 is the CANopen Node ID that you want the simulator to run with, and 0 is the CAN interface number, i.e., can0. In this example, the simulator is automatically connected to SocketCAN interface can0, make sure that you have a proper can0 CAN interface, or use the default CANopen settings in the Linux Agent to have the agent creates a vcan can0 interface for you.

How to enable the Monitoring extension

Add monitoring to the following line in cumulocity-agent.conf:

lua.plugins=system,logview,shell,version,monitoring

Luaposix library is also required:

sudo yum install luarocks
sudo luarocks install luaposix

FAQ

How can I uninstall the agent?

Run:

sudo make uninstall

How can I build RPM of the agent?

After building of the agent run:

sudo make rpm args='-r 1.1' # replace 1.1 with required rpm release number

The RPM is saved in folder build/rpm.

How can I build and package the agent as a Ubuntu snap?

The requirements are the same as above, but the build requires special treatment because Ubuntu Snap Core uses its own file system structure, instead do:

make release  PREFIX=/snap/cumulocity-agent/current/usr DATAPATH=/var/snap/cumulocity-agent/common
make snap PREFIX=/snap/cumulocity-agent/current/usr DATAPATH=/var/snap/cumulocity-agent/common

This will create the snap package. Then the agent needs to be installed in developer mode, since snap sandboxing is currently too restrictive. To install it run:

sudo snap install <agent.snap> --devmode

The agent starts automatically after installation, also at every time the machine boots.

NOTE: packaging requires snapcraft >= 2.10 because lower versions do not support the confinement property, which is required for packaging the agent as a snap.

How can I connect the agent through a proxy?

On CentOS 7 edit cumulocity-agent.service:

sudo vim /etc/systemd/system/cumulocity-agent.service

[Unit]
Description=cumulocity-agent
After=network.target

[Service]
Type=idle
Environment=http_proxy=http://<host>:<port>
Environment=https_proxy=http://<host>:<port>
ExecStart=/usr/bin/srwatchdogd /usr/bin/cumulocity-agent 240

[Install]
WantedBy=multi-user.target

Then reload systemd manager configuration and restart the agent:

sudo systemctl daemon-reload
sudo systemctl restart cumulocity-agent

Cumulocity-IoT / cumulocity-agents-linux

readme