search

CyberShadow / aconfmgr

A configuration manager for Arch Linux
1.19k stars 41 forks source link
arch-linux configuration-management

readme

aconfmgr: A configuration manager for Arch Linux
testCoverage StatusDiscussions

aconfmgr is a package to track, manage, and restore the configuration of an Arch Linux system. Its goals are:

aconfmgr tracks the list of installed packages (both native and external), as well as changes to configuration files (/etc/). Since the system configuration is described as shell scripts, it is trivially extensible.

screenshot

Table of Contents

Usage

Installation

Simply clone (or download+unzip) the GitHub repository. aconfmgr will install dependencies as needed during execution. An AUR package is also available.

First run

Run aconfmgr save to transcribe the system's configuration to the configuration directory. This will create the file 99-unsorted.sh in the configuration directory, as well as other files describing the system configuration. (The configuration directory will usually be ~/.config/aconfmgr, or ./config if running directly from git, or it can be overridden with -c.)

On the first run, aconfmgr will likely include some files which you may not want to include in your system configuration. These can be temporary or auto-generated files which are not directly owned by a package. To prevent aconfmgr from including these files in the configuration, create e.g. 10-ignores.sh in the configuration directory, with the lines e.g. IgnorePath '/path/to/file.ext' or IgnorePath '/path/to/dir/*'. (See ignoring files for details.) Delete everything from the configuration directory except that file and re-run aconfmgr save to regenerate a configuration minding these ignore rules.

Once aconfmgr save finishes, you should review the contents of 99-unsorted.sh, and sort it into one or more new files (e.g.: 10-base.sh, 20-drivers.sh, 30-gui.sh, 50-misc.sh ...). The files should have a .sh extension, and use bash syntax. I suggest adding a comment for each package describing why installing the package was needed, so it is clear when the package is no longer needed and can be removed.

During this process, you may identify packages or system changes which are no longer needed. Do not sort them into your configuration files - instead, delete the file 99-unsorted.sh, and run aconfmgr apply. This will synchronize the system state against your configuration, thus removing the omitted packages. (You will be given a chance to confirm all changes before they are applied.)

Note: you don't need to run aconfmgr via sudo. It will elevate as necessary by invoking sudo itself.

Maintenance

The configuration directory should be versioned using a version control system (e.g. Git). Ideally, the file 99-unsorted.sh should not be versioned - it will only be created when the current configuration does not reflect the current system state, therefore indicating that there are system changes that have not been accounted for.

Periodic maintenance consists of running aconfmgr save; if this results in uncommitted changes to the configuration directory, then there are unaccounted system changes. The changes should be reviewed, sorted, documented, committed and pushed.

Restoring

To restore a system to its earlier state, or to set up a new system, simply make sure the correct configuration is in the configuration directory and run aconfmgr apply. You will be able to preview and confirm any actual system changes.

Modus operandi

The aconfmgr script has two subcommands:

The configuration directory contains shell scripts, initially generated by the save subcommand, and then usually edited by the user. Evaluating these scripts will compile a system configuration description in the output directory. The difference between that directory's contents, and the actual current system configuration, dictates the actions ultimately taken by aconfmgr.

aconfmgr save will write the difference to the file 99-unsorted.sh (under the configuration directory) as a series of shell commands which attempt to bring the configuration up to date with the current system. When starting with an empty configuration, this difference will consist of the entire system description. Since the script only appends to that file, it may end up undoing configuration changes done earlier in the scripts (e.g. removing packages from the package list). It is up to the user to refactor the configuration to remove redundancies, document changes, and improve maintainability.

aconfmgr apply will apply the differences to the actual system.

The contracts of both commands are that they are mutually idempotent: after a successful invocation of either, invoking either command immediately after will be a no-op.

Packages

Background: On Arch Linux, every installed package is installed either explicitly, or as a dependency for another package. Packages can also have mandatory (hard) or optional dependencies. You can view this information using pacman -Qi <package> ("Install Reason", "Depends On", "Optional Deps").

aconfmgr only tracks explicitly-installed packages, ignoring their hard dependencies. Therefore:

Advanced Usage

Configuration syntax

The configuration files use bash syntax. The easiest way to learn the syntax is to run aconfmgr save and examine its output (99-unsorted.sh).

Some simple helper functions are defined in src/helpers.bash (sourced automatically). You are encouraged to examine their implementation - their main goal is not so much to provide an API as simply to make the generated configuration terser and more readable. As such, their use is in no way required, and they can be substituted with their underlying implementations.

The list of provided helper functions:

You are free to define your own custom helper functions as part of your configuration, e.g. by placing them in a 00-helpers.sh file.

Some examples can be found on the project wiki.

Ignoring some changes

Ignoring files

Some files will inevitably neither belong to or match any installed packages, nor can be considered part of the system configuration. This can include:

Other files may not be desirable to include in the managed system configuration because they are security-sensitive (e.g. sshd private keys).

To declare a group of files to be ignored by aconfmgr, you can use the provided IgnorePath function, e.g.:

IgnorePath '/var/lib/pacman/local/*' # package metadata
IgnorePath '/var/lib/pacman/sync/*.db' # repos
IgnorePath '/var/lib/pacman/sync/*.db.sig' # repo sigs

Make sure to quote the pattern argument to prevent globbing at configuration parse time.

Ignoring parts of files

If only some parts of a file are relevant to the system configuration, and the rest can be safely omitted or normalized to some default value, a filter rule can be configured to normalize how the contents of a file appears to aconfmgr. For example, this is applicable if a file contains a timestamp or some randomly-generated or frequently-changing value, which can be safely discarded.

To configure a file content rule, first define a function which specifies how to filter the file. The function is called with the file name as the only parameter, the file contents on its stdin, and is expected to provide the filtered contents on its stdout:

function NetworkManagerConnectionFilter() {
    grep -v '^timestamp='
}

Then, register the rule by calling the AddFileContentFilter helper function:

AddFileContentFilter '/etc/NetworkManager/system-connections/*.nmconnection' NetworkManagerConnectionFilter

Only one function may be configured per unique pattern. The most recently added rule takes precedence over any rules with matching patterns preceding it.

Ignoring packages

To ignore the presence of some packages on the system, you can use the IgnorePackage function:

IgnorePackage linux-git

aconfmgr save will not update the configuration based on ignored packages' presence or absence, and aconfmgr apply will not install or uninstall them. The packages should also not be present in the configuration's package list, of course. To ignore a foreign package (e.g. a non-AUR foreign package), use the --foreign switch (e.g. IgnorePackage --foreign my-flobulator).

Inlining files

In the output generated by aconfmgr save, non-empty new or modified files are copied in their entirety to the configuration directory, under the /files/ subdirectory, accompanied by a Copyfile invocation. However, this can sometimes be wasteful or unwieldy if the file consists of a single line, or has one line changed out of a thousand. This section describes some techniques to move the edits into the configuration files entirely.

Inlining file content entirely

Instead of copying, the file's can be inlined using a bash heredoc, or even an echo:

# Enable Magic SysRq
echo "kernel.sysrq = 1" > "$(CreateFile /etc/sysctl.d/99-sysrq.conf)"

# https://wiki.archlinux.org/index.php/Getty#Have_boot_messages_stay_on_tty1
cat > "$(CreateFile /etc/systemd/system/getty@tty1.service.d/noclear.conf)" <<EOF
[Service]
TTYVTDisallocate=no
EOF

Inlining file edits

It is also possible to generate an output file that is a modification of the original. For this purpose, the helper function GetPackageOriginalFile is provided. The function will extract the indicated file from the archive in pacman's package cache, downloading it first if necessary.

# Append some options to systemd's system.conf
cat >> "$(GetPackageOriginalFile systemd /etc/systemd/system.conf)" <<EOF
RuntimeWatchdogSec=10min
ShutdownWatchdogSec=10min
DefaultTimeoutStartSec=30s
DefaultTimeoutStopSec=30s
EOF

# Specify locales
f="$(GetPackageOriginalFile glibc /etc/locale.gen)"
sed -i 's/^#\(en_US.UTF-8\)/\1/g' "$f"
sed -i 's/^#\(en_DK.UTF-8\)/\1/g' "$f" # for ISO timestamps

The Augeas package can assist in editing configuration files:

AconfNeedProgram augtool augeas n # Install augeas now, if needed
aug() { augtool --root="$output_dir/files" "$@" ; }

# DNS
GetPackageOriginalFile filesystem /etc/resolv.conf > /dev/null
aug set '/files/etc/resolv.conf/nameserver[101]' 127.0.0.1 # dnsmasq
aug set '/files/etc/resolv.conf/nameserver[102]' 8.8.8.8 # Google
aug set '/files/etc/resolv.conf/nameserver[103]' 8.8.4.4 # Google

Comparing differences

When files are automatically generated by the configuration, or inlined therein, it can be onerous to obtain the differences between the configuration-generated version and the current system version. For this purpose, aconfmgr provides the diff action, which can be used to display a comparison between the two.

$ aconfmgr --skip-config --skip-inspection diff /etc/resolv.conf
: Compiling user configuration...
:: Skipped.
: Inspecting system state...
:: Skipped.
--- ./tmp/system/files/etc/resolv.conf  2020-10-12 07:36:00.095597318 +0000
+++ ./tmp/output/files/etc/resolv.conf  2020-10-12 07:35:39.087903266 +0000
...

The diff direction is from system to configuration, i.e., it displays changes that would be applied by aconfmgr apply. If the file belongs to a package and is unmodified on the system, aconfmgr will display the comparison between the original package version and the configuration version; likewise, if the file is absent from the configuration, the comparison will be between the filesystem version and the original package version.

Managing multiple systems

You can use the same configuration repository to manage multiple sufficiently-similar systems. One way of doing so is e.g. Git branches (having one main branch plus one branch per machine, and periodically merge in changes from the main branch into the machine-specific branches); however, it is simpler to use shell scripting:

AddPackage coreutils
# ... more common packages ...

if [[ "$HOSTNAME" == "home.example.com" ]]
then
    AddPackage nvidia
    AddPackage nvidia-utils
    # ... more packages only for the home system ...
fi

To manage different versions of a file for different systems, you can inline the file, or copy a different version depending on the hostname.

An example for inlining /etc/hosts:

f="$(GetPackageOriginalFile filesystem /etc/hosts)"
echo '1.2.3.4 home.example.net' >> "$f"
if [[ "$HOSTNAME" == laptop.example.net ]]
then
    echo '127.0.1.1 laptop.example.net laptop' >> "$f"
fi

If the file is binary, or too large to make inlining practical, CopyFileTo can be used:

CopyFileTo "/etc/hosts-$HOSTNAME" "/etc/hosts"

This will use files/etc/hosts-home.example.net for the home.example.net machine, and so on.

More tips and tricks

You can find user-contributed additions on the project wiki.

Comparisons

aconfmgr vs. Puppet/Ansible

Although aconfmgr calls itself a configuration manager, it has a number of core distinctions from the more well-known ones. One big distinction is that aconfmgr manages only one system - the one it is running on. It does not depend on any background services or network agents to work.

Another big distinction is the scope, and the direction of the flow of information. To clarify:

aconfmgr vs. NixOS

There are some similarities between the NixOS configuration file and aconfmgr: they both attempt to describe the entire system configuration from a text file, with any changes in the configuration reflecting on the system. However, while NixOS forbids directly editing files under its control, aconfmgr doesn't. As with Puppet/Ansible, aconfmgr differs in that it provides a mechanism to transcribe changes in system state back to the configuration, making it idempotent.

Another difference is that NixOS provides a specialized syntax for many common configuration settings of managed software (e.g. allowing syntax such as boot.loader.grub.device = "/dev/sda";). aconfmgr doesn't provide this directly, though this can be achieved to some extent using tools such as Augeas, without also sacrificing the extent of possible configuration to only the predefined set of available options.

aconfmgr vs. lostfiles

lostfiles is a "simple script that identifies files not owned and not created by any Arch Linux package". aconfmgr provides a superset of its functionality, not least the ability to save exclusions to a configuration file.

aconfmgr vs. etckeeper

etckeeper allows storing /etc in a version control system. aconfmgr allows this as well, although it does not directly provide a way to automatically merge configuration files with upstream package versions. This can be done manually, by inlining file changes.

Limitations

License

Copyright (c) 2016-2018 aconfmgr authors.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.