Description: I am new to DCC and model trains. I purchased an Arduino Mega and the EX-8874 Motor Shield. I was able to install EX-Commandstation successfully. I also went through all the test steps regarding testing the hardware. Everything tested successful. However I am not able to address the Locomotive when using EX-WebThrottle. I am not sure of the CV for the locomotive. I ran the Diagnotics and have attached them. I recently purchased an Atlas N scale locomotive with a ESU decoder.
The log shows that you can read CV 1 = 3 and CV 3 = 20.
I recomend you move the loco from the prog track to the main track and try driving it there (address 3)
regards,
Harald.
Sent by (dccextended@gmail.com). Created by fire.
William created a ticket
Name: William Salmon
Email: wcab77@comcast.net
Timezone: -5
Software: EX-CommandStation
Version: 4.0.x
Title: Locomotive Not responding
Description: I am new to DCC and model trains. I purchased an Arduino Mega and the EX-8874 Motor Shield. I was able to install EX-Commandstation successfully. I also went through all the test steps regarding testing the hardware. Everything tested successful. However I am not able to address the Locomotive when using EX-WebThrottle. I am not sure of the CV for the locomotive. I ran the Diagnotics and have attached them. I recently purchased an Atlas N scale locomotive with a ESU decoder.
Remaining email Quota: 100
Attachments: