Open fire-bot opened 3 months ago
This may help identify the issue. https://dcc-ex.com/reference/tools/diagnostic-d-ack-command.html#more-detail
Post the results for discussion on the discord server. https://dcc-ex.com/support/index.html#preferred-option-discord
Sent by (dccextended@gmail.com). Created by fire.
Jonathan created a ticket
Name: Jonathan Hextall
Email: jonathan.hextall@hotmail.co.uk
Timezone: 0
Software: EX-CommandStation
Version: 4.0.x
Title: Programming/Running Issues
Description: I have built a WiFi command station but have so far been unable to successfully read or write DCC addresses whilst using both the online throttle and the Engine Driver app. When trying to read an address, the loco(s) jerk/'pulse' along the programming track before returning <-1> or 'Action Failed.' I'm aware there is something regarding this in the FAQs but I have been unable to fathom it as I am somewhat of a novice - I built my command station following YouTube instructional videos. It is made up of a Elegoo Arduino Mega, Deek Robot Motor Shield and Makerfabs WiFi board. I have no issues connecting via WiFi (after flashing the board), but can't read or write addresses and locate and control locos. Many thanks in advance. Kind regards Jonathan
Remaining email Quota: 100