This was a set of tools to assemble, link and compile code for the DCPU-16 virtual CPU. Since the game that originally used this CPU was cancelled way back in 2013, this project was sunset not long after that. This repository is provided for historical and education purposes.
THIS PROJECT IS NO LONGER MAINTAINED.
IMPORTANT NOTICE: GnuWin32 no longer works as it is too out-of-date to support the reentrant lexer and parser used in the preprocesser system. If you used the old instructions, you must now uninstall the GnuWin32 versions, remove GnuWin32 from your PATH and then follow the instructions below.
You need to install Cygwin. You can do this by downloading Cygwin from this link:
Ensure that during the setup process you select the Flex and Bison packages during installation. Do not install CMake under Cygwin. You should install Cygwin into a path without spaces (it will inform you to do this).
Once installed, you must then add the Cygwin bin/ folder (located under where-ever you installed Cygwin) to your system PATH environment variable (Google has the answer if you don't know how to do this). For example, I install Cygwin in C:\UNIX, thus the path for me to add would be C:\UNIX\bin.
You must then install CMake; you can download CMake from:
You now need to add CMake to your system PATH. CMake does offer to do this for you in the installer, but occasionally this will fail and you will need to do it yourself.
Once CMake is installed, start a command prompt (you must open a new command prompt since you modified PATH) and type the following commands:
> cd path/to/repo
> cmake -G "Visual Studio 10"
Otherwise, this should work correctly and produce a Visual Studio 2010 solution that you can open up in Visual Studio 2010 C++ Express and compile!
When using Cygwin, then there are some important notes:
cmake -G "Visual Studio 10"
from the command prompt. Cygwin's case sensitivity causes the initial configuration and detection of the C compiler to fail. You will need to terminate all instances of MSBuild.exe and run the configuration again from the command prompt if this occurs.First you have to install some required libraries
$ sudo apt-get install bison flex cmake build-essential libreadline-dev libsdl1.2-dev libcurl4-openssl-dev
IMPORTANT NOTICE: Build Instructions outdated libcurl dev headers need to be installed aswell
$ sudo yum install bison flex cmake mesa-lib* zlib-devel libpng-devel
$ sudo yum groupinstall "Development Tools"
Next clone the repository into a new folder
$ git clone git://github.com/DCPUTeam/DCPUToolchain.git dcputoolchain
$ cd dcputoolchain
Now generate the Makefiles and and compile with
[dcputoolchain]$ cmake . && make
There's a possible issue about generating error definitions with the CMake scripts. If the make fails for you try this instead:
[dcputoolchain]$ cmake . && make -C libdcpu && make
First install Xcode which should install everything you need to compile.
Next, you'll need to install a few other things, I'll be using homebrew for this, which you can download here, but you could use port, fink or any other way you want to install it.
You will need to install cmake, git and sdl.
IMPORTANT NOTICE: Build Instructions outdated libcurl dev headers need to be installed aswell
$ brew install cmake
$ brew install git
$ brew install sdl
Now that you've installed git, you should be able to clone DCPUToolchain if you haven't already.
$ git clone https://github.com/DCPUTeam/DCPUToolchain.git dcputoolchain
$ cd dcputoolchain
Now we can build it.
[dcputoolchain]$ cmake . && make
If everything looks like it didn't crash and burn, then you should find everything you need in dcputoolchain/Debug
We have dropped support for Emscripten builds. As the toolchain increases in functionality, having full Emscripten support was no longer practical.