Notice:

This project has been archived and is no longer being maintained.

New repository moved to https://github.com/Dangku/RPi.GPIO.

RPi.GPIO-Amlogic

RPi.GPIO port with support for Bananapi M5/M2Pro/M2S/CM4/CM5IO

Based on:

RPi.GPIO by Ben Croston
https://sourceforge.net/projects/raspberry-gpio-python/

Bananapi M5/M2Pro/M2S/CM4/CM5IO WiringPi port
https://github.com/Dangku/amlogic-wiringPi

awesometic's Odroid RPi.GPIO port
https://github.com/awesometic/RPi.GPIO-Odroid

License

RPi.GPIO is distributed under MIT license, but wiringPi uses LGPL 3. Since this project
contains code from both projects, it is licensed under the slightly more restrictive LGPL v3.

Status

Working for simple IO on Bananapi M5/M2Pro/M2S/CM4/CM5IO PWM, events, analog read, ... not implemented

Building

1) Install build-essential, python, python-dev, python-setuptools, git
2) git clone https://github.com/Dangku/RPi.GPIO-Amlogic.git
3) cd RPi.GPIO-Amlogic
4) sudo python setup.py clean --all
5) sudo python setup.py build install

Notes

Apps require root (eg 'sudo python testapp.py')
When using BCM mode, RPi BCM numbers are passed to GPIO.xxx and translated internally to Amlogic GPIO numbers
Compare RPi connector pinout / BCM chart and Amlogic pinout to match RPi BCM with Amlogic pins