The Datadog Agent Ansible role installs and configures the Datadog Agent and integrations.
The Datadog Agent Ansible role is available through 2 different channels:
Version 4
of the role and version 5
of the collection install the Datadog Agent v7 by default.
Note that the install instructions in this document describe installation of the standalone Datadog role. For installation instructions of the Datadog collection, please refer to the collection README file. The configuration variables are the same for both the standalone role as well as the role accessed through the collection.
When using with Ansible 2.10+ to manage Windows hosts, requires the ansible.windows
collection to be installed:
ansible-galaxy collection install ansible.windows
When using with Ansible 2.10+ to manage openSUSE/SLES hosts, requires the community.general
collection to be installed:
ansible-galaxy collection install community.general
Install the Datadog role from Ansible Galaxy on your Ansible server:
ansible-galaxy install datadog.datadog
To deploy the Datadog Agent on hosts, add the Datadog role and your API key to your playbook:
- hosts: servers
roles:
- { role: datadog.datadog, become: yes }
vars:
datadog_api_key: "<YOUR_DD_API_KEY>"
The API key is required and its absence causes the role to fail. If you want to provide it through another way, outside of Ansible's control, specify a placeholder key and substitute the key at a later point.
These variables provide additional configuration during the installation of the Datadog Agent. They should be specified in the vars
section of your playbook.
Variable | Description |
---|---|
datadog_api_key |
Your Datadog API key. This variable is mandatory starting from 4.21. |
datadog_site |
The site of the Datadog intake to send Agent data to. Defaults to datadoghq.com , set to datadoghq.eu to send data to the EU site. This option is only available with Agent version >= 6.6.0. |
datadog_agent_flavor |
Override the default Debian / RedHat Package for IOT Installations on RPI. Defaults to "datadog-agent" - use "datadog-iot-agent" for RPI. |
datadog_agent_version |
The pinned version of the Agent to install (optional, but recommended), for example: 7.16.0 . Setting datadog_agent_major_version is not needed if datadog_agent_version is used. |
datadog_agent_major_version |
The major version of the Agent to install. The possible values are 5, 6, or 7 (default). If datadog_agent_version is set, it takes precedence otherwise the latest version of the specified major is installed. Setting datadog_agent_major_version is not needed if datadog_agent_version is used. |
datadog_checks |
YAML configuration for Agent checks to drop into: - /etc/datadog-agent/conf.d/<check_name>.d/conf.yaml for Agent v6 and v7, - /etc/dd-agent/conf.d for Agent v5. |
datadog_disable_untracked_checks |
Set to true to remove all checks not present in datadog_checks and datadog_additional_checks . |
datadog_additional_checks |
List of additional checks that are not removed if datadog_disable_untracked_checks is set to true . |
datadog_disable_default_checks |
Set to true to remove all default checks. |
datadog_config |
Set configuration for the Datadog Agent. The role writes the config to the correct location based on the operating system. For a full list of config options, see the datadog.yaml template file in the datadog-agent GitHub repository. |
datadog_config_ex |
(Optional) Extra INI sections to go in /etc/dd-agent/datadog.conf (Agent v5 only). |
datadog_apt_repo |
Override the default Datadog apt repository. Make sure to use the signed-by option if repository metadata is signed using Datadog's signing keys: deb [signed-by=/usr/share/keyrings/datadog-archive-keyring.gpg] https://yourrepo . |
datadog_apt_cache_valid_time |
Override the default apt cache expiration time (defaults to 1 hour). |
datadog_apt_key_url_new |
Override the location from which to obtain Datadog apt key (the deprecated datadog_apt_key_url variable refers to an expired key that's been removed from the role). The URL is expected to be a GPG keyring containing keys 382E94DE , F14F620E and C0962C7D . |
datadog_yum_repo_config_enabled |
Set to false to prevent the configuration of a Datadog yum repository (defaults to true ). WARNING: it deactivates the automatic update of GPG keys. |
datadog_yum_repo |
Override the default Datadog yum repository. |
datadog_yum_repo_proxy |
Set a proxy URL to use in the Datadog yum repo configuration. |
datadog_yum_repo_proxy_username |
Set a proxy username to use in the Datadog yum repo configuration. |
datadog_yum_repo_proxy_password |
Set a proxy password to use in the Datadog yum repo configuration. |
datadog_yum_repo_gpgcheck |
Override the default repo_gpgcheck value (empty). If empty, value is dynamically set to yes when custom datadog_yum_repo is not used and system is not RHEL/CentOS 8.1 (due to a bug in dnf), otherwise it's set to no . Note: repodata signature verification is always turned off for Agent 5. |
datadog_yum_gpgcheck |
Override the default gpgcheck value (yes ) - use no to turn off package GPG signature verification. |
datadog_yum_gpgkey |
Removed in version 4.18.0 Override the default URL to the Datadog yum key used to verify Agent v5 and v6 (up to 6.13) packages (key ID 4172A230 ). |
datadog_yum_gpgkey_e09422b3 |
Override the default URL to the Datadog yum key used to verify Agent v6.14+ packages (key ID E09422B3 ). |
datadog_yum_gpgkey_e09422b3_sha256sum |
Override the default checksum of the datadog_yum_gpgkey_e09422b3 key. |
datadog_zypper_repo |
Override the default Datadog zypper repository. |
datadog_zypper_repo_gpgcheck |
Override the default repo_gpgcheck value (empty). If empty, value is dynamically set to yes when custom datadog_zypper_repo is not used, otherwise it's set to no . Note: repodata signature verification is always turned off for Agent 5. |
datadog_zypper_gpgcheck |
Override the default gpgcheck value (yes ) - use no to turn off package GPG signature verification. |
datadog_zypper_gpgkey |
Removed in version 4.18.0 Override the default URL to the Datadog zypper key used to verify Agent v5 and v6 (up to 6.13) packages (key ID 4172A230 ). |
datadog_zypper_gpgkey_sha256sum |
Removed in version 4.18.0 Override the default checksum of the datadog_zypper_gpgkey key. |
datadog_zypper_gpgkey_e09422b3 |
Override the default URL to the Datadog zypper key used to verify Agent v6.14+ packages (key ID E09422B3 ). |
datadog_zypper_gpgkey_e09422b3_sha256sum |
Override the default checksum of the datadog_zypper_gpgkey_e09422b3 key. |
datadog_agent_allow_downgrade |
Set to yes to allow Agent downgrade (use with caution, see defaults/main.yml for details). Note: Downgrades are not supported on Windows platforms. |
datadog_enabled |
Set to false to prevent datadog-agent service from starting (defaults to true ). |
datadog_additional_groups |
Either a list, or a string containing a comma-separated list of additional groups for the datadog_user (Linux only). |
datadog_windows_ddagentuser_name |
The name of Windows user to create/use, in the format <domain>\<user> (Windows only). |
datadog_windows_ddagentuser_password |
The password used to create the user and/or register the service (Windows only). |
datadog_apply_windows_614_fix |
Whether or not to download and apply file referenced by datadog_windows_614_fix_script_url (Windows only). See https://dtdg.co/win-614-fix for more details. You can set this to false assuming your hosts aren't running Datadog Agent 6.14.*. |
datadog_macos_user |
The name of the user to run Agent under. The user has to exist, it won't be created automatically. Defaults to ansible_user (macOS only). |
datadog_macos_download_url |
Override the URL to download the DMG installer from (macOS only). |
datadog_apm_instrumentation_enabled |
Configure APM instrumentation. Possible values are: - host : Both the Agent and your services are running on a host. - docker : The Agent and your services are running in separate Docker containers on the same host.- all : Supports all the previous scenarios for host and docker at the same time. |
datadog_apm_instrumentation_libraries |
List of APM libraries to install if host or docker injection is enabled (defaults to ["java", "js", "dotnet", "python", "ruby"] ). You can find the available values in Inject Libraries Locally. |
datadog_apm_instrumentation_docker_config |
Override Docker APM configuration. Read configure Docker injection for more details. |
datadog_remote_updates |
Enable remote installation and updates through the datadog-installer. |
To configure a Datadog integration (check), add an entry to the datadog_checks
section. The first level key is the name of the check, and the value is the YAML payload to write the configuration file. Examples are provided below.
To install or remove an integration, refer to the datadog_integration
paragraph
To define two instances for the process
check use the configuration below. This creates the corresponding configuration files:
/etc/datadog-agent/conf.d/process.d/conf.yaml
/etc/dd-agent/conf.d/process.yaml
datadog_checks:
process:
init_config:
instances:
- name: ssh
search_string: ['ssh', 'sshd']
- name: syslog
search_string: ['rsyslog']
cpu_check_interval: 0.2
exact_match: true
ignore_denied_access: true
To configure a custom check use the configuration below. This creates the corresponding configuration files:
/etc/datadog-agent/conf.d/my_custom_check.d/conf.yaml
/etc/dd-agent/conf.d/my_custom_check.yaml
datadog_checks:
my_custom_check:
init_config:
instances:
- some_data: true
To pass a Python check to the playbook, use the configuration below.
This configuration requires the Datadog play and role to be a part of the larger playbook where the value passed in is the relative file path to the actual task for Linux or Windows.
This is only available for Agent v6 or later.
The key should be the name of the file created in the checks directory checks.d/{{ item }}.py
:
datadog_checks:
my_custom_check:
init_config:
instances:
- some_data: true
datadog_custom_checks:
my_custom_check: '../../../custom_checks/my_custom_check.py'
When using Autodiscovery, there is no pre-processing nor post-processing on the YAML. This means every YAML section is added to the final configuration file, including autodiscovery identifiers
.
The example below configures the PostgreSQL check through Autodiscovery:
datadog_checks:
postgres:
ad_identifiers:
- db-master
- db-slave
init_config:
instances:
- host: %%host%%
port: %%port%%
username: username
password: password
Learn more about Autodiscovery in the Datadog documentation.
To enable trace collection with Agent v6 or v7 use the following configuration:
datadog_config:
apm_config:
enabled: true
To enable trace collection with Agent v5 use the following configuration:
datadog_config:
apm_enabled: "true" # has to be a string
To enable live process collection with Agent v6 or v7 use the following configuration:
datadog_config:
process_config:
enabled: "true" # type: string
The possible values for enabled
are: "true"
, "false"
(only container collection), or "disabled"
(disable live processes entirely).
The following variables are available for live processes:
scrub_args
: Enables the scrubbing of sensitive arguments from a process command line (defaults to true
).custom_sensitive_words
: Expands the default list of sensitive words used by the command line scrubber.The system probe is configured under the system_probe_config
variable. Any variables nested underneath are written to the system-probe.yaml
, in the system_probe_config
section.
Network Performance Monitoring (NPM) is configured under the network_config
variable. Any variables nested underneath are written to the system-probe.yaml
, in the network_config
section.
Cloud Workload Security is configured under the runtime_security_config
variable. Any variables nested underneath are written to the system-probe.yaml
and security-agent.yaml
, in the runtime_security_config
section.
Universal Service Monitoring (USM) is configured under the service_monitoring_config
variable. Any variables nested underneath are written to the system-probe.yaml
, in the service_monitoring_config
section.
Compliance is configured under the compliance_config
variable. Any variables nested underneath are written to the security-agent.yaml
, in the compliance_config
section.
Note for Windows users: NPM is supported on Windows with Agent v6.27+ and v7.27+. It ships as an optional component that is only installed if network_config.enabled
is set to true when the Agent is installed or upgraded. Because of this, existing installations might need to do an uninstall and reinstall of the Agent once to install the NPM component, unless the Agent is upgraded at the same time.
datadog_config:
process_config:
enabled: "true" # type: string
scrub_args: true
custom_sensitive_words: ['consul_token','dd_api_key']
system_probe_config:
sysprobe_socket: /opt/datadog-agent/run/sysprobe.sock
network_config:
enabled: true
service_monitoring_config:
enabled: true
runtime_security_config:
enabled: true
Note: This configuration works with Agent 6.24.1+ and 7.24.1+. For older Agent versions, see the Network Performance Monitoring documentation on how to enable system-probe.
On Linux, once this modification is complete, follow the steps below if you installed an Agent version older than 6.18.0 or 7.18.0:
sudo service datadog-agent-sysprobe start
Note: If the service wrapper is not available on your system, run this command instead: sudo initctl start datadog-agent-sysprobe
.sudo service datadog-agent restart
.sudo service enable datadog-agent-sysprobe
.For manual setup, see the NPM documentation.
To enable live process collection with Agent v5, use the following configuration:
datadog_config:
process_agent_enabled: true
datadog_config_ex:
process.config:
scrub_args: true
custom_sensitive_words: "<FIRST_WORD>,<SECOND_WORD>"
By default, the current major version of the Datadog Ansible role installs Agent v7. The variables datadog_agent_version
and datadog_agent_major_version
are available to control the Agent version installed.
For v4+ of this role, when datadog_agent_version
is used to pin a specific Agent version, the role derives per-OS version names to comply with the version naming schemes of the supported operating systems, for example:
1:7.16.0-1
for Debian and SUSE based7.16.0-1
for RedHat-based7.16.0-1
for macOS7.16.0
for Windows.This makes it possible to target hosts running different operating systems in the same Ansible run, for example:
Provided | Installs | System |
---|---|---|
datadog_agent_version: 7.16.0 |
1:7.16.0-1 |
Debian and SUSE-based |
datadog_agent_version: 7.16.0 |
7.16.0-1 |
RedHat-based |
datadog_agent_version: 7.16.0 |
7.16.0-1 |
macOS |
datadog_agent_version: 7.16.0 |
7.16.0 |
Windows |
datadog_agent_version: 1:7.16.0-1 |
1:7.16.0-1 |
Debian and SUSE-based |
datadog_agent_version: 1:7.16.0-1 |
7.16.0-1 |
RedHat-based |
datadog_agent_version: 1:7.16.0-1 |
7.16.0 |
Windows |
Note: If the version is not provided, the role uses 1
as the epoch and 1
as the release number.
Agent v5 (older version):
The Datadog Ansible role includes support for Datadog Agent v5 for Linux only. To install Agent v5, use datadog_agent_major_version: 5
to install the latest version of Agent v5 or set datadog_agent_version
to a specific version of Agent v5. Note: The datadog_agent5
variable is obsolete and has been removed.
When the variables datadog_apt_repo
, datadog_yum_repo
, and datadog_zypper_repo
are not set, the official Datadog repositories for the major version set in datadog_agent_major_version
are used:
# | Default apt repository | Default yum repository | Default zypper repository |
---|---|---|---|
5 | deb https://apt.datadoghq.com stable main | https://yum.datadoghq.com/rpm | https://yum.datadoghq.com/suse/rpm |
6 | deb https://apt.datadoghq.com stable 6 | https://yum.datadoghq.com/stable/6 | https://yum.datadoghq.com/suse/stable/6 |
7 | deb https://apt.datadoghq.com stable 7 | https://yum.datadoghq.com/stable/7 | https://yum.datadoghq.com/suse/stable/7 |
To override the default behavior, set these variables to something else than an empty string.
If you previously used the Agent v5 variables, use the new variables below with datadog_agent_major_version
set to 5
or datadog_agent_version
pinned to a specific Agent v5 version.
Old | New |
---|---|
datadog_agent5_apt_repo |
datadog_apt_repo |
datadog_agent5_yum_repo |
datadog_yum_repo |
datadog_agent5_zypper_repo |
datadog_zypper_repo |
Since version 4.9.0, the use_apt_backup_keyserver
variable has been removed, as APT keys are obtained from https://keys.datadoghq.com.
When the variable datadog_windows_download_url
is not set, the official Windows MSI package corresponding to the datadog_agent_major_version
is used:
Agent version | Default Windows MSI package URL |
---|---|
6 | https://s3.amazonaws.com/ddagent-windows-stable/datadog-agent-6-latest.amd64.msi |
7 | https://s3.amazonaws.com/ddagent-windows-stable/datadog-agent-7-latest.amd64.msi |
To override the default behavior, set this variable to something other than an empty string.
When the variable datadog_macos_download_url
is not set, the official macOS DMG package corresponding to the datadog_agent_major_version
is used:
Agent version | Default macOS DMG package URL |
---|---|
6 | https://install.datadoghq.com/datadog-agent-6-latest.dmg |
7 | https://install.datadoghq.com/datadog-agent-7-latest.dmg |
To override the default behavior, set this variable to something other than an empty string.
To upgrade from Agent v6 to v7, use datadog_agent_major_version: 7
to install the latest version or set datadog_agent_version
to a specific version of Agent v7. Use similar logic to upgrade from Agent v5 to v6.
Available for Agent v6.8+
Use the datadog_integration
resource to install a specific version of a Datadog integration. Keep in mind, the Agent comes with the core integrations already installed. This command is useful for upgrading a specific integration without upgrading the whole Agent. For more details, see integration management.
If you want to configure an integration, refer to the datadog_checks
paragraph
Available actions:
install
: Installs a specific version of the integration.remove
: Removes an integration.Datadog community and Datadog Marketplace integrations can be installed with the datadog_integration
resource. Note: These integrations are considered to be "third party" and thus need third_party: true
to be set—see the example below.
datadog_integration:
<INTEGRATION_NAME>:
action: <ACTION>
version: <VERSION_TO_INSTALL>
To install third party integrations, set third_party
to true:
datadog_integration:
<INTEGRATION_NAME>:
action: <ACTION>
version: <VERSION_TO_INSTALL>
third_party: true
This example installs version 1.11.0
of the ElasticSearch integration and removes the postgres
integration.
datadog_integration:
datadog-elastic:
action: install
version: 1.11.0
datadog-postgres:
action: remove
To see the available versions of Datadog integrations, see their CHANGELOG.md
file in the integrations-core repository.
To downgrade to a prior version of the Agent:
datadog_agent_version
to a specific version, for example: 5.32.5
.datadog_agent_allow_downgrade
to yes
.Notes:
Below are some sample playbooks to assist you with using the Datadog Ansible role.
The following example sends data to Datadog US (default), enables logs, NPM, and configures a few checks.
- hosts: servers
roles:
- { role: datadog.datadog, become: yes }
vars:
datadog_api_key: "<YOUR_DD_API_KEY>"
datadog_agent_version: "7.16.0"
datadog_config:
tags:
- "<KEY>:<VALUE>"
- "<KEY>:<VALUE>"
log_level: INFO
apm_config:
enabled: true
logs_enabled: true # available with Agent v6 and v7
datadog_checks:
process:
init_config:
instances:
- name: ssh
search_string: ['ssh', 'sshd' ]
- name: syslog
search_string: ['rsyslog' ]
cpu_check_interval: 0.2
exact_match: true
ignore_denied_access: true
ssh_check:
init_config:
instances:
- host: localhost
port: 22
username: root
password: <YOUR_PASSWORD>
sftp_check: True
private_key_file:
add_missing_keys: True
nginx:
init_config:
instances:
- nginx_status_url: http://example.com/nginx_status/
tags:
- "source:nginx"
- "instance:foo"
- nginx_status_url: http://example2.com:1234/nginx_status/
tags:
- "source:nginx"
- "<KEY>:<VALUE>"
#Log collection is available on Agent 6 and 7
logs:
- type: file
path: /var/log/access.log
service: myapp
source: nginx
sourcecategory: http_web_access
- type: file
path: /var/log/error.log
service: nginx
source: nginx
sourcecategory: http_web_access
# datadog_integration is available on Agent 6.8+
datadog_integration:
datadog-elastic:
action: install
version: 1.11.0
datadog-postgres:
action: remove
network_config:
enabled: true
This example installs the latest Agent v6:
- hosts: servers
roles:
- { role: datadog.datadog, become: yes }
vars:
datadog_agent_major_version: 6
datadog_api_key: "<YOUR_DD_API_KEY>"
If using a site other than the default datadoghq.com
, set the datadog_site
var to the appropriate URL (eg: datadoghq.eu
, us3.datadoghq.com
).
This example sends data to the EU site:
- hosts: servers
roles:
- { role: datadog.datadog, become: yes }
vars:
datadog_site: "datadoghq.eu"
datadog_api_key: "<YOUR_DD_API_KEY>"
On Windows, remove the become: yes
option so the role does not fail. Below are two methods to make the example playbooks work with Windows hosts:
Using the inventory file is the recommended approach. Set the ansible_become
option to no
in the inventory file for each Windows host:
[servers]
linux1 ansible_host=127.0.0.1
linux2 ansible_host=127.0.0.2
windows1 ansible_host=127.0.0.3 ansible_become=no
windows2 ansible_host=127.0.0.4 ansible_become=no
To avoid repeating the same configuration for all Windows hosts, group them and set the variable at the group level:
[linux]
linux1 ansible_host=127.0.0.1
linux2 ansible_host=127.0.0.2
[windows]
windows1 ansible_host=127.0.0.3
windows2 ansible_host=127.0.0.4
[windows:vars]
ansible_become=no
Alternatively, if your playbook only runs on Windows hosts, use the following in the playbook file:
- hosts: servers
roles:
- { role: datadog.datadog }
vars:
...
Note: This configuration fails on Linux hosts. Only use it if the playbook is specific to Windows hosts. Otherwise, use the inventory file method.
On Windows it's possible to uninstall the Agent by using the following code in your Ansible role:
- name: Check If Datadog Agent is installed
win_shell: |
(@(Get-ChildItem -Path "HKLM:SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" -Recurse) | Where {$_.GetValue("DisplayName") -like "Datadog Agent" }).PSChildName
register: agent_installed_result
- name: Set Datadog Agent installed fact
set_fact:
agent_installed: "{{ agent_installed_result.stdout | trim }}"
- name: Uninstall the Datadog Agent
win_package:
product_id: "{{ agent_installed }}"
state: absent
when: agent_installed != ""
Note: this information applies to versions of the role prior to 4.9.0. Since 4.9.0, the apt_key
module is no longer used by the role.
On Debian Stretch, the apt_key
module used by the role requires an additional system dependency to work correctly. The dependency (dirmngr
) is not provided by the module. Add the following configuration to your playbooks to make use of the present role:
---
- hosts: all
pre_tasks:
- name: Debian Stretch requires the dirmngr package to use apt_key
become: yes
apt:
name: dirmngr
state: present
roles:
- { role: datadog.datadog, become: yes }
vars:
datadog_api_key: "<YOUR_DD_API_KEY>"
The yum
Python module, which is used in this role to install the Agent on CentOS-based hosts, is only available on Python 2 if Ansible 2.10.x or below is used. In such cases, the dnf
package manager would have to be used instead.
However, dnf
and the dnf
Python module are not installed by default on CentOS-based hosts before CentOS 8. In this case, it is not possible to install the Agent when a Python 3 interpreter is used.
This role fails early when this situation is detected to indicate that Ansible 2.11+ or a Python 2 interpreter is needed when installing the Agent on CentOS / RHEL < 8.
To bypass this early failure detection (for instance, if dnf
and the python3-dnf
package are available on your host), set the datadog_ignore_old_centos_python3_error
variable to true
.
Due to a critical bug in Agent versions 6.14.0
and 6.14.1
on Windows, installation of these versions is blocked (starting with version 3.3.0
of this role).
NOTE: Ansible fails on Windows if datadog_agent_version
is set to 6.14.0
or 6.14.1
. Use 6.14.2
or above.
If you are updating from 6.14.0 or 6.14.1 on Windows, use the following steps:
datadog.datadog
Ansible role to the latest version (>=3.3.0
).datadog_agent_version
to 6.14.2
or above (defaults to latest).For more details, see Critical Bug in Uninstaller for Datadog Agent 6.14.0 and 6.14.1 on Windows.
Running the service_facts
module on Ubuntu 20.04 causes the following error:
localhost | FAILED! => {
"changed": false,
"msg": "Malformed output discovered from systemd list-unit-files: accounts-daemon.service enabled enabled "
}
To fix this, update Ansible to v2.9.8
or above.
Starting from role 4.21
the API key is mandatory for the role to proceed.
If you need to install the agent through Ansible but don't want to specify an API key (if you are baking it into a container/VM image for instance) you can:
datadog_manage_config: false
)