Ratatosk is a de novo error correction tool for erroneous long reads designed for accurate variant calling and assembly. It is based on a compacted and colored de Bruijn graph built from accurate short reads. Reads color paths in the graph while vertices are annotated with candidate de novo SNPs and short repeats. We demonstrate that Ratatosk can reduce the raw error rate of ONT reads several fold on average with a mean error rate as low as 1.4%. Variant calling on Ratatosk corrected data shows 99.91% and 95.88% F1 for SNP and indels respectively. An assembly of the Ashkenazi individual HG002 created from Ratatosk corrected ONT reads yields a contig N50 of 39.7 Mbp and a quality value of 48.5.
All are probably already installed on your computer as those are installed by default on most operating systems. They can be downloaded and installed by following the instructions on their respective websites. However, it is most likely they are all available via a package manager for your operating system:
sudo apt-get install build-essential cmake zlib1g-devbrew install --with-toolchain llvm
brew install cmake zlibUbuntu app (from Canonical Group Limited)Ubuntu app (it should open an Ubuntu terminal)sudo apt-get install build-essential cmake zlib1g-devgit clone --recursive https://github.com/DecodeGenetics/Ratatosk.git
cd Ratatoskmkdir build && cd build
cmake ..
make
make installBy default, the installation creates:
Notes
make install might require sudo (sudo make install) to proceed. If you want to install Ratatosk in a non-default path, add the option -DCMAKE_INSTALL_PREFIX=/some/path/ .. to the cmake command where /some/path/ is where you want to see the Ratatosk files installed. Do not forget to add this path to your environment variables (see Troubleshooting). If you encounter any problem during the installation, see the Troubleshooting section.
Before starting
-s): reads from the same pair must have the same FASTA/FASTQ name (if the reads are extracted from a BAM file, use samtools bam2fq -n).-Q, e.g -Q 90 must be used with ONT R10.-o) so make sure the output folder has plenty of free space.Ratatosk correct -v -G -c 16 -s short_reads.fastq -l in_long_reads.fastq -o out_long_readsRatatosk corrects (Ratatosk correct) the long read file (-l in_long_reads.fastq) with 16 threads (-c 16) using an index built from the short read file (-s short_reads.fastq). Information messages are printed during the execution (-v) and the corrected long reads are written to the compressed file out_long_reads.fastq.gz (-G -o out_long_reads).
The correction can be split in two steps which can be run on different compute nodes in the order given below. It can be beneficial if there is a time limit on the used compute nodes.
Ratatosk correct -1 -v -c 16 -s short_reads.fastq -l in_long_reads.fastq -o out_long_reads
Ratatosk correct -2 -v -G -c 16 -s short_reads.fastq -l out_long_reads.2.fastq -L in_long_reads.fastq -o out_long_readsThese commands split the correction in the two different correction passes of Ratatosk (-1 and -2). The first command is likely to be the most memory and time consuming of the two.
The correction can be split in four steps which can be run on different compute nodes in the order given below. It is sometimes beneficial if there is a time limit on the used compute nodes.
Ratatosk index -1 -v -c 16 -s short_reads.fastq -l in_long_reads.fastq -o out_long_reads
Ratatosk correct -1 -v -c 16 -g out_long_reads.index.k31.fasta -d out_long_reads.index.k31.rtsk -l in_long_reads.fastq -o out_long_reads
Ratatosk index -2 -v -c 16 -g out_long_reads.index.k63.fasta -l out_long_reads.2.fastq -o out_long_reads
Ratatosk correct -2 -v -G -c 16 -g out_long_reads.index.k63.fasta -d out_long_reads.index.k63.rtsk -l out_long_reads.2.fastq -L in_long_reads.fastq -o out_long_readsThese commands split the correction in the two different correction passes of Ratatosk (-1 and -2) and each correction pass is split into its indexing part (index) and correction part (correct).
See our Nextflow pipeline to run the correction in parallel over multiple compute nodes.
Base quality (-Q)
By default, Ratatosk considers that the maximum base quality value of long reads is 40 but this can be changed to a different value using -Q. For example, newer ONT dataset can use a maximum quality vaue of 90 in which case -Q 90 must be used.
Insert size (-i)
By default, Ratatosk uses an estimated paired-end short reads insert size (read length * 2 + fragment size) of about 500bp. You can set the exact insert size with -i. If your input short reads are single end reads, set the insert size to the read length.
Trimming/Splitting (-t)
By default, Ratatosk outputs all bases (corrected and uncorrected). By using -t, bases with a low correction quality score are trimmed and split. Specifically, given a minimum quality score Q (-t Q), only subsequences of the corrected long reads for which the bases have a correction quality score >=Q are output. Each output subsequence will have @name/i as name for which name is the input name of the long read and i is an integer subsequence ID for read name. Note that only subsequences larger than the k2-mer size in Ratatosk (63) are output.
The default k1/k2-mer lengths (1st/2nd correction passes) are 31/63. To work with larger k-mers (using -k/-K), you must compile Ratatosk with a larger MAX_KMER_SIZE parameter where MAX_KMER_SIZE=round(k2 + 1, 32), i.e. (k2 + 1) rounded to the larger multiple of 32. Specifying MAX_KMER_SIZE at compilation is done as follows when entering the cmake command:
cmake -DMAX_KMER_SIZE=96 ..In this example, the maximum k1/k2-mer length allowed is 95.
See Variant calling to call SNP and indels from Ratatosk-corrected long reads.
Ratatosk --helpdisplays the command line interface:
Ratatosk x.y.z
Hybrid error correction of long reads using colored de Bruijn graphs
Usage: Ratatosk [COMMAND] [PARAMETERS]
Usage: Ratatosk --help
Usage: Ratatosk --version
Usage: Ratatosk --cite
[COMMAND]:
correct Correct long reads with short reads
index Prepare a Ratatosk index (advanced)
Use "Ratatosk [COMMAND] --help" to get a specific command helpTwo commands are available: correct and index. Command index is only useful when correcting a data set in multiple steps or over multiple compute nodes (see multiple machines de novo correction).
Ratatosk correct --helpdisplays the command line interface for the correct command:
Ratatosk x.y.z
Hybrid error correction of long reads using colored de Bruijn graphs
Usage: Ratatosk [COMMAND] [PARAMETERS]
Usage: Ratatosk --help
Usage: Ratatosk --version
Usage: Ratatosk --cite
[COMMAND]: correct
[PARAMETERS]:
> Mandatory with required argument:
-s, --in-short Input short read file in fasta/fastq(.gz)
List of input short read files (one file per line)
-l, --in-long Input long read file to correct in fasta/fastq(.gz)
List of input long read files to correct (one file per line)
-o, --out-long Output corrected long read file
> Optional with required argument:
-c, --cores Number of cores (default: 1)
-S, --subsampling Rate of short reads subsampling (default: Auto)
-t, --trim-split Trim and split bases with quality score < t (default: no trim/split)
Only sub-read with length >= 63 are output if used
-u, --in-unmapped-short Input read file of the unmapped short reads (FASTA/FASTQ possibly gzipped)
List of input read files of the unmapped short reads (one file per line)
-a, --in-accurate-long Input high quality long read file (FASTA/FASTQ possibly gzipped)
List of input high quality long read files (one file per line)
(Those reads are NOT corrected but assist the correction of reads in input)
-g, --in-graph Load graph file prepared with the index command
-d, --in-unitig-data Load unitig data file prepared with the index command
-Q, --max-base-qual Maximum base quality of input long reads (default: 40)
> Optional with no argument:
-G, --gzip-out Output file is compressed with gzip
-O, --force-io-order Force same long read input/output order
-v, --verbose Print information
[ADVANCED PARAMETERS]:
> Optional with required argument:
-m, --min-conf-snp-corr Minimum confidence threshold to correct a SNP (default: 0.9)
-M, --min-conf-color2 Minimum confidence threshold to color vertices for 2nd pass (default: 0)
-C, --min-len-color2 Minimum length of a long read to color vertices for 2nd pass (default: 3000)
-i, --insert-sz Insert size of the input paired-end short reads (default: 500)
-k, --k1 Length of short k-mers for 1st pass (default: 31)
-K, --k2 Length of long k-mers for 2nd pass (default: 63)
-w, --max-len-weak1 Do not correct non-solid regions >= w bases during 1st pass (default: 1000)
-W, --max-len-weak2 Do not correct non-solid regions >= w bases during 2nd pass (default: 5000)
> Optional with no argument:
-1, --1st-pass-only Perform *only* the 1st correction pass (default: false)
-2, --2nd-pass-only Perform *only* the 2nd correction pass (default: false)
-F, --no-snp-correction Disable SNP detection and correction
-I, --no-graph-index Disable graph index output
[EXPERIMENTAL PARAMETERS]:
> Optional with required argument:
-L, --in-long_raw Input long read file from 1st pass (FASTA/FASTQ possibly gzipped)
List of input long read files to correct (one file per line)
-p, --in-short-phase Input short read phasing file (diploid only)
List of input short read phasing files (one file per line)
-P, --in-long-phase Input long read phasing file (diploid only)
List of input long read phasing files (one file per line)Ratatosk index --helpdisplays the command line interface for the index command:
Ratatosk x.y.z
Hybrid error correction of long reads using colored de Bruijn graphs
Usage: Ratatosk [COMMAND] [PARAMETERS]
Usage: Ratatosk --help
Usage: Ratatosk --version
Usage: Ratatosk --cite
[COMMAND]: index
[PARAMETERS]:
> Mandatory with required argument:
-s, --in-short Input short read file to correct (FASTA/FASTQ possibly gzipped)
List of input short read files to correct (one file per line)
-l, --in-long Input long read file to correct (FASTA/FASTQ possibly gzipped)
List of input long read files to correct (one file per line)
-o, --out-long Prefix of the output index file
> Mandatory with no argument:
-1, --1st-pass-only Prepare index for the 1st correction pass (default: false)
-2, --2nd-pass-only Prepare index for the the 2nd correction pass (default: false)
> Optional with required argument:
-c, --cores Number of cores (default: 1)
-S, --subsampling Rate of short reads subsampling (default: No subsampling)
-u, --in-unmapped-short Input read file of the unmapped short reads (FASTA/FASTQ possibly gzipped)
List of input read files of the unmapped short reads (one file per line)
-a, --in-accurate-long Input high quality long read file (FASTA/FASTQ possibly gzipped)
List of input high quality long read files (one file per line)
(Those reads are NOT corrected but assist the correction of reads in input)
-g, --in-graph Load graph file prepared with the index command
-Q, --max-base-qual Maximum base quality of input long reads (default: 40)
> Optional with no argument:
-v, --verbose Print information
[ADVANCED PARAMETERS]:
> Optional with required argument:
-M, --min-conf-color2 Minimum confidence threshold to color vertices for 2nd pass (default: 0)
-C, --min-len-color2 Minimum length of a long read to color vertices for 2nd pass (default: 3000)
-i, --insert-sz Insert size of the input paired-end short reads (default: 500)
-k, --k1 Length of short k-mers for 1st pass (default: 31)
-K, --k2 Length of long k-mers for 2nd pass (default: 63)
> Mandatory with no argument:
-F, --no-snp-correction Disable SNP detection and correction
-I, --no-graph-index Disable graph index outputCan I provide multiple read files in input?
Yes, use mutiple times parameters -s/-l/-u/-a, once for each input file.
Can I provide a file which is a list of read files in input?
Yes, a text file containing one input filename per line with no empty lines can be given in input.
Does Ratatosk work with input short reads which are not paired-end reads?
Yes, although Ratatosk works best with paired-end short reads in input. You can also mix paired and non-paired short reads in input.
Are the output corrected long reads in the same order as the input uncorrected long reads?
Not necessarily.
Is it fine if my input long reads contain non-{A,C,G,T} characters?
Yes.
Is it fine if my input short reads contain non-{A,C,G,T} characters?
Yes (the k-mers overlapping these characters will be discarded).
Why does Ratatosk outputs non-{A,C,G,T} characters?
Ratatosk automatically detects heterozygous SNP candidates from the input short and long reads. If Ratatosk corrects a SNP candidate site in a long read but cannot establish with enough confidence which of the possible bases is the right one, a IUPAC character is output to represent the ambiguity. For example, character N represents all possible bases while character R only represents A or G.
My downstream pipeline does not handle the non-{A,C,G,T} characters output be Ratatosk, what should I do?
Replace these characters by random {A,C,G,T} characters. The python script scripts/replaceIUPAC.py is provided to that effect.
What are the quality scores output by Ratatosk?
Ratatosk outputs a quality score for each corrected base indicating how confident is Ratatosk in the correction of that base. A score of 0 means the base is left uncorrected, a score of 1 means the base was corrected with a very low confidence while a score of 40 means that Ratatosk is very confident of the correction. The scores are output in the Phred33 format but the scoring scale is linear (rather than logarithmic for Phred33).
The following might happen when environment variables are not set correctly on your system:
make) fails because some header files (.h) are not foundAssuming the header files (.h) are located at the path /usr/local/include/, the following command set the environment variables C_INCLUDE_PATH and CPLUS_INCLUDE_PATH correctly for the time of the session:
export C_INCLUDE_PATH=$C_INCLUDE_PATH:/usr/local/include/
export CPLUS_INCLUDE_PATH=$CPLUS_INCLUDE_PATH:/usr/local/include/@article{holley2021ratatosk,
title={Ratatosk: hybrid error correction of long reads enables accurate variant calling and assembly},
author={Holley, Guillaume and Beyter, Doruk and Ingimundardottir, Helga and M{\o}ller, Peter L and Kristmundsdottir, Sn{\ae}dis and Eggertsson, Hannes P and Halldorsson, Bjarni V},
journal={Genome Biology},
volume={22},
number={1},
pages={1--22},
year={2021}
}For any question, feedback or problem, please feel free to file an issue on this GitHub repository and we will get back to you as soon as possible.