signal-cli compiled for Raspberry Pi

• See https://github.com/AsamK/signal-cli for the source and original author.
• See https://github.com/exquo/signal-libs-build for the source of the dependent libraries.

So far, I've only tested/used the 'register' (with --captcha), 'verify' and 'send -m' commands. All ran with no errors.

'rpi_signal-cli.0.9.0.tar' will likely be my last compile of the signal-cli for the raspberry pi
as I've moved my home automation to an 'Intel box' with Debian and Docker.
The provided document should be sufficient guide to build newer versions yourself.

rpi_signal-cli.0.9.0.tar -> Signal-cli v0.9.0 Build with:

• Raspberry PI 3B with Raspbian GNU/Linux 10 (buster) Lite (32bit)
• Java JDK v11.0.12+7-post-Raspbian-2deb10u1
• Gradle v7.1
• Rust 1.53.0
• protobuf-compiler 3.6.1.3-2+rpi1
• Git 2.20.1
• zip 3.0-11
• unzip 6.0-23+deb10u2

Manual_build_v0.9.0.pdf -> the manual build steps, used to build the tar file.

Older version(s):

• rpi_signal-cli.0.8.4.1.tar -> Signal-cli v0.8.4.1 build on Raspberry PI 3B with Raspbian GNU/Linux 10 (buster)
• rpi_signal-cli.0.8.1.tar -> Signal-cli v0.8.1 build on Raspberry PI 3B with Raspbian GNU/Linux 10 (buster)
• rpi_signal-cli.0.7.4.tar -> Signal-cli v0.7.4 build on Raspberry PI 3B with Raspbian GNU/Linux 10 (buster)
• rpi_signal-cli.0.7.1.tar -> Signal-cli v0.7.1 build on Raspberry PI 3B with Raspbian GNU/Linux 10 (buster)

LICENSE

==== No warranty, implied or otherwise. Provided 'as is'. Use at your own risk. ====

Licensed under the GPLv3: http://www.gnu.org/licenses/gpl-3.0.html