TPG_EcalLaserValidation

CMS-ECAL_TPGAnalysis (9_4_0_pre3)

This repository houses scripts to run the ECALTPGAnalysis of CMS with jenkins jobs

It runs on Jenkins in order to validate the ECAL conditions (laser corrections, pedestals...)

To trigger the running new.sh is included in the jenkins system cron jobs

runs only when the input configuration file of new.sh is modified

To modify ToRun/NewtoRun.txt anywhere, do:

git clone git@github.com:EcalLaserValidation/TPG_EcalLaserValidation.git

edit ToRun/NewtoRun.txt with new conditions

week 40 year 2017 run1 304093 =sqlite1 run2 304204 =sqlite2

For the automated procedure of the conditions validation,

ToRun/NewtoRun.txt is modified by a cron job then

new.sh runs a script

./tpganalysis_jenkins_2018.sh $sqlite1 $sqlite2 $week $year

======================================================================================================================

THE FOLLOWING DESCRIBES THE STEPS BUT DOES NOT NEED TO BE DONE MANUALLY, ALL DONE BY THE ABOVE SCRIPT

tpganalysis_jenkins_2018.sh runs scripts housed and updated here:

https://gitlab.cern.ch/ECALPFG/EcalTPGAnalysis/tree/tpganalysis_jenkins

inside the script there is a link to where the sqlite files can be downloaded from: these are the same one that L1 emulation can use

wget http://cern.ch/ecaltrg/EcalLin/EcalTPG_${sqlite1}_moved_to_1.db wget http://cern.ch/ecaltrg/EcalLin/EcalTPG_${sqlite2}_moved_to_1.db

The jobs can then be run:

./runTPGbatchLC_jenkins_2018.sh jenkins $reference $dataset $GT $nevents $sqlite1 & ./runTPGbatchLC_jenkins_2018.sh jenkins $reference $dataset $GT $nevents $sqlite2 &

======================================================================================================================

The output of jenkins can be found here:

wget http://cmssdt.cern.ch/SDT/jenkins-artifacts/TPG_EcalLaserValidation/TPGAnalysis-2018-$week-$sqlite1-$sqlite2.tgz

the slides for the validation are produced here:

http://ecaltrg.web.cern.ch/ecaltrg/TPGAnalysis/2018/Slides/