swervec: The Swerve compiler

Since this project is a work in progress, a lot of the stuff in here is subject to change and can become outdated

About this project

This is a simple compiler for a made up programming language, Swerve.

The compiler phases are planned to be:

1. Lexical Analysis
2. Parsing
3. Semantic Analysis
4. IR generation
5. Optimization
6. Code generation

Although the phases can, and most likely will, change as the project goes on.

The goal is to create a somewhat practical language that is statically typed and is influenced by syntactic features of other languages.

Memory management is TBD

Parsing Strategy: Recursive Descent, LL(1)

The parser produces an AST.

Examples of the AST structure can be found here.

Testing strategy

This project has both unit and integration tests.

Unit tests will be used to test simple cases, and integration tests will be used to handle more complex ones (such as testing variable scope)

There are no coverage requirements, but the objective is to cover enough edge cases that someone would be confident different parts of the compiler will work

Testing commands

• To run unit tests only: ./gradlew test
• To run integration tests only: ./gradlew integration
• To run both: ./gradlew check
• Manual testing: ./gradlew run --args=<path/to/file>

Testing Objectives

1. Provide proof of correctness for implementation of compiler and language ideas
2. Handle regressions breaking existing code
3. Document compiler and language features/structure through usage
4. Catch bugs as early as possible

Language specification

Statements in the language must end with a semicolon

Statements are:

• control flow
  • break
  • continue
  • return
• variable declaration
• variable assignment
• arithmetic and logic
• literal values
• array indexes
• etc.

Reserved words:

• const
• fn
• prototype
• generic
• int
• double
• boolean
• string
• Array
• return
• if
• else
• for
• while
• continue
• break
• true
• false
• null

Operators:

• =
• ==
• !=
• <
• <=
• >=
• >
• +
• +=
• -
• -=
• *
• *=
• **
• /
• /=
• %
• &&
• ||
• ++
• --

Comments

Inline comments can be made with // which will cause the compiler to ignore the rest of the line (unless // is in a string)

Multiline comments can be made as starting with /* and ending with */. Unterminated multiline comments are a syntax error.

Type System

Swerve is intended to be a statically, strongly typed language. Variable types and function return types must be explicitly declared.

Basic types include

• int
• double
• string
• boolean

Array types are dependent on the depth (level of nesting) and the type of data stored in the array. For example, Array<Array<int>> is used to store an array of arrays of ints.

Typecasting is only allowed via builtin functions

• toString()
• toInt()
• toDouble()

Operations on types

Binary operators

• Addition
  • int, int => int
  • double, double => double
  • int, double => double
  • double, int => double
  • string, string => string
  • Array, Array => Array (must have matching types)
• Multiplication
  • int, int => int
  • double, double => double
  • int, double => double
  • double, int => double
  • string, int => string
  • int, string => string
• Subtraction / Division / Modulus / Exponent
  • int, int => int
  • double, double => double
  • int, double => double
  • double, int => double
• Bitwise (^ XOR, & AND)
  • int, int => int
  • boolean, boolean => int
  • int, boolean => int
  • boolean, int => int
• Comparison (<, <=, >, >=)
  • int, int => boolean
  • double, double => boolean
  • int, double => boolean
  • double, int => boolean
• Equality (==, !=)
  • two operands with same type => boolean
  • anything, null => boolean
  • null, anything => boolean
  • int, double => boolean
  • double, int => boolean
• Logical operators (&&, ||)
  • boolean, boolean => boolean

Unary operators

• !
  • boolean => boolean
• ++, -- (either side)
  • int => int
  • double => double
• - (minus)
  • int => int
  • double => double

Other type requirements

• ternary: boolean ? anything : anything
• conditional blocks

    if (boolean) {
      // ...
    }
    else if (boolean) {
      // ...
    }

• while loops: while (boolean) {}
• for loops
  • for (type element : container)
    • container must be either a string or array
    • the type of element must be either a string if container is a string
    • or the matching type of the container elements
  • for (int i = 0; i < value; i++)
    • the first part of the loop must be a variable declaration or assignment
    • the second part must be a boolean
    • the third part must match the type of the first part
• array index
  • The variable being indexed must be an array (containing any type)
  • the index value itself must be an int
  • cannot index greater than the array depth
• void functions
  • can have implicit or explicit return
  • cannot return any value (including null) during explicit return
• non-void functions
  • must have explicit return that returns a value matching the declared return type
  • all branches (conditionals, loops, etc.) must lead to return

Variable Declarations

variables declarations must have a type and can optionally be const

Examples:

• int myVar = 10;
• const double PI = 3.14;

A valid variable name can contain uppercase letters, lowercase letters, numbers, and underscores, but must start with an uppercase or lowercase letter.

Once a variable is declared, you can reassign it (unless it's a const variable). Re-declaring, by specifying a type before it, is an error unless it's part of a loop condition.

Arrays

Arrays can be declared using the Array keyword and must specify their types by wrapping the type in < and >. There are a few different ways to declare arrays that change their behavior.

1. immutable arrays
   • The variable the array is set to cannot be reassigned and the array is immutable.
   • Since the array cannot change, the size is optional for these
   • Examples:
   • const Array<int> fib = {1, 1, 2, 3, 5, 8};
   • const Array<string> items[2] = {"hammer", "nail"};
2. mutable arrays
   • These are just arrays declared without const and are therefore the default
   • The variable the array is set to can be reassigned and the array is mutable
   • Examples:
   • Array<int> scores[1] = {98};

Strings

Regular strings, like in many other languages, must be wrapped in double quotes and can not contain any nested double quotes unless those are escaped

Examples:

• string animal = "elephant"; // valid string
• string JSON = "{\"key\": \"value\"}"; // valid string
• JSON = "{"key": "value"}"; // invalid string

Another way to declare strings is to use multiline strings. The multiline strings in Swerve were inspired by the syntax of multiline comments, so they operate in a similar way. You can start multiline string with /" and terminate them with "/. Multiline strings allow you to nest quotes without escaping them, and they preserve any whitespace characters such as tabs and newlines. Unterminated multiline strings are a syntax error!

Examples:

• print(/"hi there"/); // valid string

• string rows = /"
      row1,
      row2,
      ...
      rowN
  "/; // valid string

• string response = /"{
      "key": "value"
  }"/; // valid string

• // invalid string
  string incomplete = /"
      hello
  // Reached EOF without terminating string

Function declarations

Functions are declared with the fn keyword followed by the name, and then parameters enclosed in parenthesis. A function body starts with an opening curly brace and must be terminated by a closing curly brace.

Functions with that are not void must specify the return type by adding : after the closing parenthesis of the parameters and then the type. Void functions can skip the : and type.

All parameters must be valid variables and have a type to the left of them.

Examples:

• fn multiply(int x, int y) : int {
      return x * y;
  }

• fn voidFunction() {
      return;
  }

Function names can be reused only with different parameters.

Valid Example:

•   fn toString(int value): string {
      // ...
    }
  
    fn toString(double value): string {
      // ...
    }

Invalid Example:

•   fn toString(int value): string {
      // ...
    }
  
    fn toString(int value): string {
      // ...
    }

The order of function declarations matter so if you have a function calling another one, the caller must be defined after the called function.

Prototypes and generics

There are certain times when the developers will want to pass in Arrays as parameters to functions but don't necessarily care what's in the arrays.

For example, when you want to get the length of an array, it doesn't matter whether the array is of type Array<string> or Array<Array<int>>.

In order to add flexibility to the type system without completely giving up type safety, two new keywords were introduced, prototype and generic.

Generics

The generic keyword is a type label that can be placed in front of a variable during declaration that states that we'll figure out the type later on.

You cannot perform any operations on generic variables that aren't compatible with every type.

Example:

  generic var1;
  generic var2;
  // ...assign them values at some point
  var1 + var2;

The above example will produce an error because you aren't allowed to do addition with generics.

Generic arrays are declared by using Array<generic> which let you treat the variable as an array without caring about what subtype it contains.

When you index a generic array, it will return a generic type. You can't index Array<generic> twice, but you can index Array<Array<generic>> twice.

Prototypes

A prototype is a function definition that contains one or more generic parameters. It can return nothing, a concrete (non-generic) type, or a generic type.

The use of the generic keyword outside a prototype definition is not allowed. You cannot initialize a generic to any literal type except for null.

When a prototype is called with concrete types, the semantic analyzer will re-analyze it with the concrete parameter types in place of the generic ones to make sure it's type safe and to place any local variables that were generic as concrete types in the symbol table. Generic returns are analyzed to approximate their return types and transformed into functions.

Translation to functions (AKA Monomorphization)

On a function call:

1. Check the function part of the symbol table for a matching definition; if found, return that
2. Check prototypes part of symbol table for a matching definition; if not found, throw error
3. If prototype returns nothing or concrete type, run process of type checking local variables and de-genericizing them in the symbol table, return the return type
4. If prototype returns generic type (generic or array of generics), do the same analysis of step 3 but also derive a concrete return type
5. Return the first non-null return type derived from step 4; if there are more than one non-null types, throw an error

Since generics can call other generics, this process is inherently recursive.

Prototypes can also be directly or indirectly (they call functions that call them) recursive, we need to store a queue of the prototypes being translated and if we detect a duplicate translation, we return null for that call.

Prototypes can slow compilation due to this process and are still less type safe than normal functions so use them sparingly and only when the types truly don't matter

Program Structure

All programs must have an entry point into the execution of the program. That's why the compiler requires you to define a main function.

The main function can take one of a few forms:

1. no params, no return
2. no params, return int
3. int param and Array<string> param, no return
4. int param and Array<string> param, int return

The return from the main function is treated as the program's return code. If your main doesn't return, it will automatically have a return code of 0 (successful execution).

The parameters specified in main function forms 3 and 4 are used to deal with command line arguments.

Typically, they'll look like this:

fn main(int argc, Array<string> argv) {}

argv is an array of the command line arguments (separated by space) and argc is the length of argv.

You don't have to use the parameter names, but those names are common practice in C, which is an inspiration for this language.

The only code allowed outside a function are variable declarations (including arrays). Any variables declared outside a function will be global; while any variables inside a function are local to the function.

Built-ins

There are built-in variables, functions, and prototypes in order to make development easier. These names are reserved so re-defining them is an error.

Variables

name	type	description
INT_MIN	int	minimum value of an integer
INT_MAX	int	maximum value of an integer
DOUBLE_MIN	double	minimum value of a double
DOUBLE_MAX	double	maximum value of a double

Functions

name	param types	return type	description
printerr	string	none	print to stderr
printerr	string, int	none	print to stderr and terminate the program with an exit code
length	string	int	get length of string
max	int, int	int	compare two values and return the greater one
max	double, double	double	compare two values and return the greater one
max	int, double	double	compare two values and return the greater one
max	double, int	double	compare two values and return the greater one
min	int, int	int	compare two values and return the lesser one
min	double, double	double	compare two values and return the lesser one
min	int, double	double	compare two values and return the lesser one
min	double, int	double	compare two values and return the lesser one
replace	string, string, string	string	Replace the first matching substring with a different substring
replaceAll	string, string, string	string	Replace all matching substrings with a different substring
split	string	Array\<string>	Split string character by character
split	string, string	Array\<string>	Split string by delimiter
slice	string, int	string	Create string from the index to the end of the string
slice	string, int, int	string	Create string from start to end index of string
contains	string, string	boolean	check if string contains substring
toInt	double	int	return int from double (rounds down)
toInt	string	int	return int from string
toDouble	int	double	return double version of int
toDouble	string	double	return double from string
at	string, int	string	index string
join	Array\<string>, string	string	Combine strings into one string with delimiter
reverse	string	string	reverse string
startsWith	string, string	boolean	check if string starts with substring
endsWith	string, string	boolean	check if string ends with substring
sleep	double	none	pause execution for specified amount of time (seconds)
sleep	int	none	pause execution for specified amount of time (seconds)
exit	none	none	stop the program with exit code 0
exit	int	none	stop the program with supplied exit code
fileExists	string	boolean	check if the file exists
readFile	string	Array\<string>	Get contents of file line by line
writeFile	string, string	none	Write to the file
appendToFile	string, string	none	Add to the end of the file
renameFile	string, string	none	Change the name of the file
deleteFile	string	none	Delete the file
getEnv	string	string	Get a value from a specified environment variable
setEnv	string, string	none	Set the value of an environment variable

Prototypes

name	param types	return type	description
print	generic	none	print to the screen
println	generic	none	print to the screen with new line character
getType	generic	string	Get the type of the variable or constant
length	Array\<generic>	int	Return length of array
capacity	Array\<generic>	int	Get the total size of the array
slice	Array\<generic>, int	Array\<generic>	Create an array from the index to the end of the array
slice	Array\<generic>, int, int	Array\<generic>	Create array from start to end index of array
contains	Array\<generic>, generic	boolean	Check if the array contains an element
append	Array\<generic>, generic	none	Add an element to the end of an array
prepend	Array\<generic>, generic	none	Add an element to the beginning of an array
insert	Array\<generic>, generic, int	none	Add element at index
removeIndex	Array\<generic>, int	none	Remove element at index from array
remove	Array\<generic>, generic	none	Remove first matching element from array
removeAll	Array\<generic>, generic	none	Remove all matching elements from array
indexOf	Array\<generic>, generic	int	Get the index of an array element; return -1 if not found
toString	generic	string	return string version of parameter
reverse	Array\<generic>	none	In place reversing of array
sort	Array\<generic>	none	In place sort an array