Turtle-ESP-mouse-jiggler
Mouse jiggler of the ESP USB and BLE
Have a look at the Youtube introduction
*This example turns the ESP32 into a Bluetooth LE mouse and USB that continuously moves the mouse.
| Supported | BLE | USB | ||
|---|---|---|---|---|
| ESP32 | >=4MB | Yes | Yes | No |
| ESP32-S2 | >=4MB | Yes | No | Yes |
| ESP32-S3 | >=4MB | Yes | Yes | Yes |
| ESP32-C2/ESP8684(H2/H4) | >4MB | Notyet | Yes | No |
| ESP32-C3 | >=4MB | Yes | Yes | No |
| ESP32-C5 | >=4MB | Notyet | Yes | Yes |
| ESP32-C6 | >=4MB | Yes* | Yes | No |
| ESP32-C61 | >=4MB | Notyet | Yes | No |
| ESP32-H2 | >=4MB | Yes* | Yes | No |
| ESP32-P4 | No | No | No | |
| ESP8266 | No | No | No |
Yes is supported by Arduino but not yet by Platformio 2024-09
Notyet is not yet supported as i do not have the Chip or Platform software 2024-09
You can program ESP32 board
With this Link
You can find some Turtle 3d Print box
At this link