EnviroDIY Mayfly Data Logger

The EnviroDIY™ Mayfly Data Logger is an Arduino-framework microcontroller board designed specifically for environmental Internet of Things (IoT) applications with the goal to facilitate professional-quality, do-it-yourself (DIY) environmental science and monitoring.

This EnviroDIY_Mayfly_Logger Github repository provides hardware design files and example code sketches, the EnviroDIY community provides support via project posts and forums, and the Mayfly Logger board is available for purchase on on Amazon for user convenience.

Features:

• ATmega1284p processor
  • 128kB program (flash) memory, 16kB RAM
  • 2 UART, 1 I2C, 1 SPI connection
  • 32 total I/O pins
  • 3.3V, 8MHz operating frequency
• Integrated 6V solar lipo battery charger
• Precise real time clock (RTC, DS3231) with separate power supply
• Auxillary 16 bit ADC (TI ADS1115)
• FTDI chip for USB communication
• microSD memory card socket
• XBee radio/wifi/cellular module socket
• 6 Grove connectors with access to I2C, auxillary ADC, and digital pins
• 0.5A switchable power supply for sensors at either 3.3V or 5V
• On-board power switch
• Two controllable LED's, red and green
• One programmable push-button
• Option of using external power supply at 5-12V

Pin-out for v0.5b

Solder Jumper Connections for v0.5b

* SJ5 has been removed in versions newer than v0.4 ** SJ6 and SJ10 should not both be closed at the same time

Programming

Mayfly Data Logger can be programmed using standard Aruduino code and community libraries via the Arduino Integrated Development Environment (IDE) software or the more powerful PlatformIO extensions for Visual Studio Code or Atom.

To use the Mayfly with the Arduino IDE you must add "EnviroDIY ATmega Boards" using the Tools > Board > Boards Manager as described in the Mayfly Data Logger Software post

No addition set-up is required to use the PlatformIO. The proper enviroment settings for the Mayfly in a platformio.ini file are:

[env:mayfly]
platform = atmelavr
board = mayfly
framework = arduino

Additional Resources and Links

• Read the Getting Started With the Mayfly Data Logger page on the EnviroDIY community website for guidance for beginners with the Mayfly, sensor station maintence, and data management.
• Make use of the The EnviroDIY Mayfly Data l=Logger Forum to ask and answer questions about the Mayfly
• Learn Mayfly basics following our Mayfly Data Logger Software post and running the example and workshop code sketches, using the Arduino IDE (from File > Sketchbook), from our EnviroDIY_Mayfly_Logger > examples or EnviroDIY_Mayfly_Logger > workshop folders.
• Advance your capabilities to deploy solar-powered environmental monitoring stations with our LearnEnviroDIY tutorial
• Utilize the ModularSensors code library and other EnviroDIY libraries on GitHub for datalogging built around the Mayfly
• Find and attend a training workshop for do-it-yourself environmental monitoring built around the Mayfly by contacting the Stroud Water Research Center's citizen science outreach or education departments.

Design Files & Further Documentation

We share our EnviroDIY Mayfly logger hardware design files and documentation in this repository's Hardware Design Files pages and Documentation pages.

License

Software sketches and code are released under the BSD 3-Clause License -- See LICENSE.md file for details.

Documentation is licensed as Creative Commons Attribution-ShareAlike 4.0 (CC-BY-SA) copyright.

Hardware designs shared are released, unless otherwise indicated, under the CERN Open Hardware License 1.2 (CERN_OHL).

Credits

EnviroDIY™ is presented by the Stroud Water Research Center, with contributions from a community of enthusiasts sharing do-it-yourself ideas for environmental science and monitoring.

Shannon Hicks is the primary developer of the EnviroDIY Mayfly Data Logger hardware, with input from many other contributors.

The Mayfly was developed based on the SODAQ Mbili board hardware and the SODAQ Mbili bootloader software, designed by Gregory Knauff (GKNFF).

This project has benefited from the support from the following funders:

• William Penn Foundation
• US Environmental Protection Agency (EPA)
• National Science Foundation, awards EAR-0724971, EAR-1331856, ACI-1339834
• Stroud Water Research Center endowment