issues
search
Equipment-and-Tool-Institute
/
iumpr
IUMPR Data Collection Tool
MIT License
3
stars
5
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
Duplicate packets are displayed in the report
#67
gumbelmj
closed
6 years ago
0
Log if there are other modules using the same bus address
#66
gumbelmj
closed
7 years ago
0
Include the vehicle communication adapter in the IUMPR report
#65
gumbelmj
closed
6 years ago
1
Pre-report check VIN should be requested globally
#64
gumbelmj
closed
7 years ago
0
Engine Hours should be requested globally
#63
gumbelmj
closed
7 years ago
0
DM7 Requested SPN is not set properly
#62
gumbelmj
closed
7 years ago
0
Ignition Cycles switches between red and green
#61
gumbelmj
closed
7 years ago
0
DM26's report as "Supported/Not Supported" instead of "Enabled/Not Enabled"
#60
gumbelmj
closed
7 years ago
0
Comparison Module expects with DM21 from SA0
#59
gumbelmj
closed
7 years ago
0
Fix #43 - Look for a DM11 response != ACK and request the Key ON, Engine OFF before clearing codes.
#58
gumbelmj
closed
7 years ago
0
Fix #56 Don't print the TSCC Gap message at the end of Function C
#57
gumbelmj
closed
7 years ago
0
TSCC Gap message should not be printed at the end of Function C
#56
gumbelmj
closed
7 years ago
0
#52 Changed the report format of DM5 and DM20 after collecting the test results to be a table format
#55
gumbelmj
closed
7 years ago
0
#51 Read the Vehicle Distance from any controller and use the highest value
#54
gumbelmj
closed
7 years ago
1
Unexpected DM request sequence
#53
gumbelmj
closed
7 years ago
1
Collect test results request vs. composite results tables
#52
gumbelmj
closed
7 years ago
2
Total Vehicle Distance was not received
#51
gumbelmj
closed
7 years ago
1
#44 Fix resizing issue and Cals label text
#50
gumbelmj
closed
7 years ago
1
#46 Handle any number of asterisks in the component identification packet
#49
gumbelmj
closed
7 years ago
0
#42 Expect messages from either source address 0x00 or 0x01
#48
gumbelmj
closed
7 years ago
6
DM21 Response missed from SA1 and SA61
#47
joekartje
closed
7 years ago
0
Unable to complete vehicle data plate report generation due to string index out of range
#46
joekartje
closed
7 years ago
0
DDC Engines unable to generate data plate report due to "Communications Error"
#45
joekartje
closed
7 years ago
1
Sustain the display of multiple CAL IDs when the UI window is manually resized
#44
joekartje
closed
7 years ago
1
No confirmation that DM11 was successful
#43
joekartje
closed
7 years ago
4
DDC Engines send DM20s from address 0x01 and 0x3D
#42
gumbelmj
closed
7 years ago
1
#38 Let the tracking gracefully end rather than interrupting it.
#41
gumbelmj
closed
7 years ago
0
#37 Display Supported/Not Supported for DM5 & DM26 Statuses
#40
gumbelmj
closed
7 years ago
0
Single ended tests shown as failed should be shown as passing.
#39
joekartje
closed
7 years ago
1
Messages can be logged out of order
#38
gumbelmj
closed
7 years ago
0
DM5 and DM26 need to also display Supported/Not Supported
#37
gumbelmj
closed
7 years ago
2
Failure to parse one ini file renders the application useless
#36
gumbelmj
closed
7 years ago
1
CVN is a 32-bit little endian CRC
#35
gumbelmj
closed
7 years ago
2
Single ended tests shown as failed should be shown as passing
#34
gumbelmj
closed
7 years ago
0
DM5 Vehicle Composite Summary Incorrect
#33
gumbelmj
closed
7 years ago
1
We have two different abbreviations for numerator and denominator. Maybe we should commonize them.
#32
gumbelmj
closed
7 years ago
0
We didn’t need to see the incomplete tests listed twice for Function E
#31
gumbelmj
closed
7 years ago
1
Bus isn't stopped when MonitorTracking is stopped
#30
gumbelmj
closed
7 years ago
0
NPE as a result of no initial DM5
#29
gumbelmj
closed
7 years ago
1
Simplify display of complete and incomplete scaled test results
#28
joekartje
closed
7 years ago
1
Remove "supports scaled test results" and freeze frame length from the list of SPNs that support test results.
#27
joekartje
closed
7 years ago
1
Simplify list of HD OBD devices
#26
joekartje
closed
7 years ago
5
Excess Time Error message after a DM11. This is not possible for a new file.
#25
joekartje
closed
7 years ago
3
Omit YYYY-MM-DDT from the secondary lines in the query and ECM response
#24
joekartje
closed
7 years ago
0
Address Claim missing from log file
#23
joekartje
closed
7 years ago
3
Connection Speed missing from log file
#22
joekartje
closed
7 years ago
5
Multiple Data Monitoring Banners observed after DM20 timeout
#21
joekartje
closed
7 years ago
2
Correct Time Gap Calculations to reflect only Time Since Code Cleared
#20
joekartje
closed
7 years ago
3
Leading Asterisks missing on changed monitor ratios
#19
joekartje
closed
7 years ago
2
DM20 Queries Timed out for V2
#18
joekartje
closed
7 years ago
4
Previous
Next