Ua-netinst is a great tool that will install a minimal(no GUI) Debian based Raspbian OS. It is Raspberry Pi agnostic, therefore there is only one set of instructions to follow, no matter which model of RasPi you have.
Download, unzip and copy the ua-netinst files to your SD card.
Download, unzip and copy ONLY the file installer-config.txt from Raspi-Ethereum-Installv0.3.x to your SD card
The contents of your SD card should be the exact same 19 files as in this screenshot. Next, safely remove and install SD card into a powered down Raspberry Pi (1B, 1B+, or 2) with ethernet cable connected between RasPi and an internet enabled DHCP router.
Power on your Pi... Make sure there is activity with the RasPi's onboard led's(you should see green led's flashing as well as activity on the ethernet port led's)
Once ua-netinst is complete, we need to log in to our router and look at the dhcp client list to find the IP address assigned to our device, alternately you can use one of my favorite mobile apps, FING, as long as your android phone is connected to the same network. We can then, using a linux cli or putty, ssh(instructions) into the device with the following default credentials:
root
root
At this point, we need to change the root password
passwd
and add a user other than root
with:
adduser <newusername>
Choose a strong password and enter it twice, accept all default values, and then add new user to admin group with:
adduser <newusername> sudo
Log in as your new user, and download, unzip, and choose eth-install.sh OR geth-install.sh:
wget https://github.com/EthEmbedded/Raspi-Eth-Install/archive/v0.3.3.tar.gz
tar -xvzf v0.3.3.tar.gz
cd Raspi-Eth-Install-0.3.3
sudo chmod +x geth-installer.sh
OR sudo chmod +x eth-installer.sh
WARNING Installation of eth on ver 1B & 1B+ of the Pi can take as much as 12 hours to compile... we will be working on cross compiling with crosstools-ng in the very near future.
Now lets run the install script for either geth
or eth
./geth-installer.sh
OR
./eth-installer.sh
Finally lets start the client:
For geth
:
cd ~/go-ethereum/build/bin
./geth
For eth
:
cd ~/cpp-ethereum/build/eth
./eth
For geth/go-ethereum visit: https://github.com/ethereum/go-ethereum/wiki/Command-Line-Options
For eth/cpp-ethereum visit: https://github.com/ethereum/cpp-ethereum/wiki/Using-Ethereum-CLI-Client
To learn more about Ethereum.org get involved!
A great place to start are the forums at https://forum.ethereum.org/
OR
Learn more about creating DApps by visiting https://dappsforbeginners.wordpress.com/