FYSETC_R4

Hardware

All related hardware files are in hardware folder in this repository.

FYSETC R4 only support Klipper firmware. All related Klipper firmware files like printer.cfg are in firmware folder in this repository.

Step 1: Power on the board

Step 2: Connect R4 to your computer with USBC cable

Step 3: Push an hold BOOTSEL button

Step 4: Click RST button and release BOOTSEL button

Step 5: RPI-RP2 folder will show up on your computer, copy your built firmware klipper.uf2 to the folder.

See printer.cfg in this repository firmware folder.