Closed wasn-eu closed 2 months ago
Does the AC Charger blue smart ip22 support the announcement protocol?
You can check by opening the Vic tron Connect App and if on the device overview page you can see status information from the device then it does support it.
Can you post a screenshot of the device overview page to help identify which fields are expected to be transmitted by the device in the announcement protocol?
Thanks
I have the Blue Smart IP22 charger and it does not support the announcement protocol. Also running latest beta v5.92beta2.
Can you maybe activate it on the Product info
page? It is called Instant readout via Bluetooth
.
If the product does not support the Bluetooth announcement (Instant readout) then there is unfortunatly nothing I can do here.
Instant readout is not possible. i opened my charger and found a 6pin header.
you can find the documentation here: https://github.com/wasn-eu/Victron_BlueSmart_IP22
Looks like the normal and very well documented victron ve direct protocol.
On 18 August 2023 7:29:33 pm GMT+02:00, WASN @.***> wrote:
Instant readout is not possible. i opened my charger and found a 6pin header.
you can find the documentation here: https://github.com/wasn-eu/Victron_BlueSmart_IP22
-- Reply to this email directly or view it on GitHub: https://github.com/Fabian-Schmidt/esphome-victron_ble/issues/21#issuecomment-1684221779 You are receiving this because you commented.
Message ID: @.***>
Found that out too. Now i have to find the the rx pin on the charger side. Will get my Oszilloskop out
Hi
any timeline when the blue smart charger ip22 will be supported? i have a blue smart 24/12 (1) here and need to integrate it