search

Fabian-Schmidt / esphome-victron_ble

Use official Victron BLE endpoint for fetching data from Victron devices via Bluetooth LE via ESPHome.
GNU General Public License v3.0
181 stars 18 forks source link

Voltage and current values from mppt #72

Open ondrej0402 opened 4 hours ago

ondrej0402 commented 4 hours ago

Hi Fabian, thanks for your contributions, I would like to ask, if its possible to add pv panels values of voltage and current into victron ble communications? Thx Ondrej

Fabian-Schmidt commented 3 hours ago

Please ask Victron to add this information to the Bluetooth advertising messages sent by the devices.

Currently I expose all data the advertising message frame contains.

Victron uses the Bluetooth advertising messages in the app for the overview page and as they don't display PV voltage there they are not sent it.

ondrej0402 commented 1 hour ago

And these messages are not the same like victron send it from device? Because mppt voltage and current are visible in the victron app, connected by bluetooth. Thanks for answer

Dňa ut 5. 11. 2024 o 10:48 Fabian @.***> napísala(a):

Please ask Victron to add this information to the Bluetooth advertising messages sent by the devices.

Currently I expose all data the advertising message frame contains.

Victron uses the Bluetooth advertising messages in the app for the overview page and as they don't display PV voltage there they are not sent it.

— Reply to this email directly, view it on GitHub https://github.com/Fabian-Schmidt/esphome-victron_ble/issues/72#issuecomment-2456708022, or unsubscribe https://github.com/notifications/unsubscribe-auth/BGP2M5BGIYUK3TVWQCJZIZ3Z7CH6NAVCNFSM6AAAAABRF7YBKCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJWG4YDQMBSGI . You are receiving this because you authored the thread.Message ID: @.***>