Donation

It took me quite some effort to get the plugin available. Small contributions are welcome...

Use your Mobile Banking App and scan the QR Code

The QR codes comply the EPC069-12 European Standard for SEPA Credit Transfers (SCT). The amount of the donation can possibly be modified in your Mobile Banking App.	5 EUR	10 EUR

Use PayPal

Domoticz-iROBOT-ROOMBA-plugin

Domoticz plugin for the support of the iRobot ROOMBA vacuum robot cleaner. It is tested with the ROOMBA i7.

It enables you to manage the following functions:

Start/stop cleaning (when stopping, the vacuum cleaner returns automatically to its docking station)
Status of the vacuum cleaner (charging, running, docking, ...)
Dedicated device for the battery status (Note: the battery status is systematically updated in the "Run" device. However on request an additional device is created from version 1.1.0 to give the battery status. This additional device is not made visible by default. It is required to use "Add device" in the Setup - Devices menu).
Device showing the error text returned by the vaccum cleaner

It could easily extended with other functions, however so far it gives me all I need for my home automation (eg ROOMBA is running while I am not at home).

The current version of the plugin supports multiple iRobot/Roomba devices (on the same network). The devices are created based on the config.ini file (see hereunder). The devices are created with names including the names of the vaccum cleaners. If you want to change the name of the devices, please see the instructions below.

The plugin is based on MQTT (https://en.wikipedia.org/wiki/MQTT).

Installation (linux)

Follow this procedure to install the plugin.

Install Domoticz plugin

Copy all the files in folder /home/pi/domoticz/plugin/Roomba. If the domoticz folder is not located in /home/pi, adapt also the folder references further in these instructions.

Install MQTT Broker (mosquitto)

Install the python paho-mqtt library with sudo pip3 install paho-mqtt
Install mosquitto with sudo apt install mosquitto
It is adviced to change the mosquitto configuration file (by default in /etc/mosquitto/mosquitto.conf)
- persistence false
- log_dest none
Start the service with `sudo service mosquitto start

Get the ROOMBA information

This chapter explains how to create the config.ini file that 1) is used to get the device status from the iRobots and 2) to identify the different devices in Domoticz.

!! Please see https://github.com/NickWaterton/Roomba980-Python for the last version of the instructions how to create the config.ini file.

Get the local IP address of your ROOMBA (often starting with 192.168.x.yyy and x=0 or 1). You can retrieve it from your router. Alternatively you can use tools like nmap (eg nmap -sP 192.168.0.*). The local IP address if furthere reference to as ROOMBA_IP.
Get the BLID/Password of the ROOMBA
- Install the six python library with sudo pip3 install six
- Go to the folder /home/pi/domoticz/plugins/Roomba with cd /home/pi/domoticz/plugins/Roomba/
- run python3 ./roomba/getpassword.py -R ROOMBA_IP and follow the instructions. Shortly the vacuum cleaner must be docked and you need to HOLD the HOME button for some seconds until a sound is played (the WIFI indicator on the ROOMBA will flash). My last expercience generated an SSL error (DH_KEY_TOO_SMALL). Alternatively you can also use the command python3 ./roomba/password.py <login> <password> to get the username/blid and password from the iRobot cloud.
- If all went well, there should be a config.ini file in the folder /home/pi/domoticz/plugins/Roomba/. You can check the content with cat config.ini and will find the ROOMBA_IP, blid, password and some other data about the ROOMBA vaccum cleaner.

Create ROOMBA Client to get information and forward to MQTT Broker

roomba is a python3 module that acts as MQTT Client and forward the informaton to a MQTT Broker. It is based on Nick Waterton's work (https://github.com/NickWaterton/Roomba980-Python). It can be started manually by python3 roomba --topic /roomba/feedback/# --broker localhost --broker_feedback /roomba/feedback --mappath '' --mapsize '' --echo --log '/tmp/roomba.log' from the folder /home/pi/domoticz/plugin/Roomba. The arguments have the following meaning:

--topic: information/topics subscribed from the ROOMBA
--broker: (IP)Address of the MQTT Broker/Server
--broker_feedback: information/topics from the ROOMBA sent to the MQTT Broker
--mappath: set to '' to avoid creating html files and disable map creation
--mapsize: set to '' to avoid creating html files and disable map creation
--log: set to '/tmp/roomba.log' to avoid creating log file on disk

It is possible to add more debug information by adding the argument --debug to the command line.

Create a service to start up the client automatically on boot of your domoticz server (stop the python script manually if it would have been started manually before):

Create a file /etc/systemd/system/roomba.service with the following content (be sure that the folder /home/pi/domoticz/plugins/Roomba/roomba is already copied).
```
[Unit]
Description=Roomba mqtt client
After=network.target mosquitto.service
```

[Service] Type=simple Restart=always RestartSec=10 User=pi ExecStart=/usr/bin/python3 /home/pi/domoticz/plugins/Roomba/roomba --configfile /home/pi/domoticz/plugins/Roomba/config.ini --topic /roomba/feedback/# --broker localhost --broker_feedback /roomba/feedback --mappath '' --mapsize '' --echo --log '/tmp/roomba.log'

[Install] WantedBy=multi-user.target


* To start up the service at boot, execute `sudo systemctl enable roomba`
* Start the service with `sudo service roomba start`
* You can check if the service is correctly started with `sudo service roomba status` (should show `active (running)`)

### Add the device in Domoticz
Use the `Setup - Hardware` menu to add your ROOMBA to Domoticz. Select the device type `Roomba` and you are done.
If all goes well three devices are created, one in the `Switches` (to start/stop) and two in the `Utilities` (status of the ROOMBA an error text from ROOMBA).

### How to change the device names
As the plugin supports multiple vaccum cleaners in parallel, the default names of the automatically created devices are fixed. It is recommended not to change them otherwise new devices will automatically be created again with default names.
However if for any reason you would like to change the names, follow the procedure below.
* Go to the devices in the Switches and Utilies menu
* Click on the "Edit" button
* Copy the current name of the device from the user interface in the field "Name"
* Add the following text in the Description field of the device: `Do not remove: [{"Name":"xxx"}]`, where xxx should be replaced by the default device name copied in the instruction just above. If you have already text in the Description field, you can add at then end `; Do not remove: [{"Name":"xxx"}]`
* Click the "Save" button

Now you can change the default device names. The plugin will automatically fall back to the information in the Description of the device.

## Updating from mqtt_Roomba.py to roomba module (linux)
When having installed the previous version of the plugin (service based on mqtt_Roomba.py), please follow the instuctions here:
 * Download the new files
 * Stop the service with `sudo service roomba stop`
 * Change the file `/etc/systemd/system/roomba.service` with the content specified in the chapter Create ROOMBA Client to get information and forward to MQTT Broker (only the Execstart changed)
 * Update the changes with the instruction `sudo systemctl daemon-reload`
 * Start the service with `sudo service roomba start`
 * Check the service is correcly running with `sudo service roomba status`

Success!

**Don't forget a small gift by using the donation button...**

FilipDem / Domoticz-iROBOT-ROOMBA-plugin

readme