Rika Firenet

Component to integrate with Rika Firenet rikafirenet.

This component will set up the following platforms.

Planning

• Add readme example graphs possible
• Get the config flow working with update and platform selections
• Support preset mode (in comment atm)
• Support smart target temperature. e.g. Show base temperature when active
• Support Rika stove without external thermostat (only tested with external thermostat)
• ... Open for more stuff ...

Installation

1. Using the tool of choice open the directory (folder) for your HA configuration (where you find configuration.yaml).
2. If you do not have a custom_components directory (folder) there, you need to create it.
3. In the custom_components directory (folder) create a new folder called rika_firenet.
4. Download all the files from the custom_components/rika_firenet/ directory (folder) in this repository.
5. Place the files you downloaded in the new directory (folder) you created.
6. Restart Home Assistant
7. In the HA UI go to "Configuration" -> "Integrations" click "+" and search for "Rika Firenet"

Configuration is done in the UI

Utility meters example:

utility_meter:
  hourly_stove_consumption:
    source: sensor.<stove>_stove_consumption
    cycle: hourly
  daily_stove_consumption:
    source: sensor.<stove>_stove_consumption
    cycle: daily
  weekly_stove_consumption:
    source: sensor.<stove>_stove_consumption
    cycle: weekly
  monthly_stove_consumption:
    source: sensor.<stove>_stove_consumption
    cycle: monthly

  hourly_stove_runtime:
    source: sensor.<stove>_stove_runtime
    cycle: hourly
  daily_stove_runtime:
    source: sensor.<stove>_stove_runtime
    cycle: daily
  weekly_stove_runtime:
    source: sensor.<stove>_stove_runtime
    cycle: weekly
  monthly_stove_runtime:
    source: sensor.<stove>_stove_runtime
    cycle: monthly

Contributions are welcome!

If you want to contribute to this please read the Contribution guidelines