circuitplayground

2019 woodford planting village workshop

Setup

there's a setup.sh script in this repository.

Use it to make sure the udev rules are setup so you can use WevUSB to directly upload to the circuit playground

Can run using

curl http://fi.gy/setup.sh | sh

Then update the ciruit playground's firmware - see https://learn.adafruit.com/makecode/webusb

NOTE: WebUSB is enabled on Chrome and Chromium - not firefox

use https://makecode.adafruit.com/?webusb=1# to use the webUSB connection

Sources

The adafruit-trinket.rules comes from https://github.com/adafruit/Trinket_Arduino_Linux