PowerFGT
This is a Powershell module for configure a FortiGate (Fortinet) Firewall.
With this module (version 0.8.1) you can manage:
- Address (Add/Get/Copy/Set/Remove object type ipmask/subnet, FQDN, iprange, geo and mac)
- AddressGroup (Add/Get/Copy/Set/Remove and Add/Remove Member)
- DHCPServer (Get)
- DNS (Get)
- HA (Get)
- Interface (Add/Get/Set/Remove Vlan, aggregate, loopback and Add/Remove Member)
- IP Pool (Get)
- Log Traffic (Get)
- Monitor (Get)
- Policy (Add/Get/Remove)
- Proxy Address/Address Group/ Policy (Add/Get/Set/Remove)
- RoutePolicy (Get)
- Service (Get)
- Service Group (Get)
- Static Route (Add/Get/Remove)
- System Admin (Get)
- System Global (Get/Set)
- System Settings (Get/Set)
- Security Profiles (Get)
- User LDAP (Get)
- User Local (Get)
- User Group (Get)
- User SAML (Get)
- User RADIUS (Get)
- VDOM (Get)
- Virtual IP (Add/Get/Remove object type static-nat)
- Virtual IP Group (Add/Get/Copy/Set/Remove and Add/Remove Member)
- Virtual WAN Link/SD-WAN (Get)
- VPN IPsec Phase 1/Phase 2 Interface (Add/Get/Set/Remove)
- VPN SSL (Get Client, Portal, Settings)
- Web Filter (Get Profile)
- Zone (Add/Get/Set/Remove and Add/Remove Member)
There is some extra feature
More functionality will be added later.
Connection can use HTTPS (default) or HTTP
Tested with FortiGate (using 5.6.x, 6.x and 7.x firmware but it will be also work with 5.4.x)
Add (Experimental) support of VDOM is available using -vdom parameter for each cmdlet
Usage
All resource management functions are available with the Powershell verbs GET, ADD, COPY, SET, REMOVE.
For example, you can manage Address with the following commands:
Get-FGTFirewallAddressAdd-FGTFirewallAddressCopy-FGTFirewallAddressSet-FGTFirewallAddressRemove-FGTFirewallAddress
Requirements
- Powershell 5 or 6.x/7.x (Core) (If possible get the latest version)
- A Fortinet FortiGate Firewall and HTTPS enable (recommended)
Instructions
Install the module
# Automated installation (Powershell 5 or later):
Install-Module PowerFGT
# Import the module
Import-Module PowerFGT
# Get commands in the module
Get-Command -Module PowerFGT
# Get help
Get-Help Get-FGTFirewallAddress -FullExamples
Connecting to the FortiGate Firewall
The first thing to do is to connect to a FortiGate Firewall with the command Connect-FGT :
# Connect to the FortiGate Firewall
Connect-FGT 192.0.2.1
#we get a prompt for credentialYou can select the port using -port parameter
# Connect to the FortiGate Firewall using port 4443
Connect-FGT 192.0.2.1 -port 4443if you are using OTP (FortiToken) for admin access, you can use -token_code or -token_prompt for specifity or ask the token/OTP when connecting
# Connect to the FortiGate Firewall with the token asked
Connect-FGT 192.0.2.1 -token_promptYou can also connect using API Token (Documentation for Generate REST API )
# Connect to the FortiGate Firewall with API Token
Connect-FGT 192.0.2.1 -api_token 79GyN89Q7w00rG6pj09yd7wGG3kmdsif you get a warning about Unable to connect Look Issue
Address
You can create a new Address Add-FGTFirewallAddress, retrieve its information Get-FGTFirewallAddress,
modify its properties Set-FGTFirewallAddress, copy/clone its properties Copy-FGTFirewallAddress
or delete it Remove-FGTFirewallAddress.
# Get information about ALL address (using Format Table)
Get-FGTFirewallAddress | Format-Table
q_origin_key name uuid subnet
------------ ---- ---- ------
FIREWALL_AUTH_PORTAL_ADDRESS FIREWALL_AUTH_PORTAL_ADDRESS a940cdea-368c-51e9-2596-5ddfd54a087a 0.0.0.0 0.0.0.0
SSLVPN_TUNNEL_ADDR1 SSLVPN_TUNNEL_ADDR1 a9416aca-368c-51e9-fe74-7dbb95fa64c9 10.212.134.200 10.212...
all all a940cc32-368c-51e9-82f5-fa5337e9f45c 0.0.0.0 0.0.0.0
autoupdate.opera.com autoupdate.opera.com a918c192-368c-51e9-ca8d-88cc94ed2d54 0.0.0.0 0.0.0.0
google-play google-play a918cd22-368c-51e9-2f4f-2d914955741a 0.0.0.0 0.0.0.0
swscan.apple.com swscan.apple.com a918d1dc-368c-51e9-08a7-c6004bf38fb9 0.0.0.0 0.0.0.0
update.microsoft.com update.microsoft.com a918d650-368c-51e9-0cca-5f006a059f0b 0.0.0.0 0.0.0.0
# Create an address (type ipmask)
Add-FGTFirewallAddress -Name 'My PowerFGT Network' -ip 192.0.2.1 -mask 255.255.255.0
q_origin_key : My PowerFGT Network
name : My PowerFGT Network
uuid : 9c65f75e-383e-51e9-a33a-caeffb7cfd33
subnet : 192.0.2.0 255.255.255.0
type : ipmask
start-ip : 192.0.2.0
end-ip : 255.255.255.0
fqdn :
country :
wildcard-fqdn :
cache-ttl : 0
wildcard : 192.0.2.0 255.255.255.0
sdn :
tenant :
organization :
epg-name :
subnet-name :
sdn-tag :
policy-group :
comment :
visibility : enable
associated-interface :
color : 0
filter :
obj-id :
list : {}
tagging : {}
allow-routing : disable
# Get information an address (name) and display only some field (using Format-Table)
Get-FGTFirewallAddress -name "My PowerFGT Network" | Select name, subnet, type, start-ip, end-ip | Format-Table
name subnet type start-ip end-ip
---- ------ ---- -------- ------
My PowerFGT Network 192.0.2.0 255.255.255.0 ipmask 192.0.2.0 255.255.255.0
# Get information some address (filter_type contains) and display only some field (using Format-Table)
Get-FGTFirewallAddress -name update -filter_type contains | Select name, type, fqdn | Format-Table
name type fqdn
---- ---- ----
autoupdate.opera.com fqdn autoupdate.opera.com
update.microsoft.com fqdn update.microsoft.com
# Modify an address (name, comment, interface...)
Get-FGTFirewallAddress -name "My PowerFGT Network" | Set-FGTFirewallAddress -name "MyNetwork" -comment "My comment" -interface port2
q_origin_key : MyNetwork
name : MyNetwork
uuid : 9c65f75e-383e-51e9-a33a-caeffb7cfd33
subnet : 192.0.2.0 255.255.255.0
type : ipmask
start-ip : 192.0.2.0
end-ip : 255.255.255.0
fqdn :
country :
wildcard-fqdn :
cache-ttl : 0
wildcard : 192.0.2.0 255.255.255.0
sdn :
tenant :
organization :
epg-name :
subnet-name :
sdn-tag :
policy-group :
comment : My comment
visibility : enable
associated-interface : port2
color : 0
filter :
obj-id :
list : {}
tagging : {}
allow-routing : disable
# Copy/Clone an address
Get-FGTFirewallAddress -name "MyNetwork" | Copy-FGTFirewallAddress -name "My New Network"
q_origin_key : My New Network
name : My New Network
uuid : 0c8da508-3840-51e9-f525-0601066767cc
subnet : 192.0.2.0 255.255.255.0
type : ipmask
start-ip : 192.0.2.0
end-ip : 255.255.255.0
fqdn :
country :
wildcard-fqdn :
cache-ttl : 0
wildcard : 192.0.2.0 255.255.255.0
sdn :
tenant :
organization :
epg-name :
subnet-name :
sdn-tag :
policy-group :
comment : My comment
visibility : enable
associated-interface : port2
color : 0
filter :
obj-id :
list : {}
tagging : {}
allow-routing : disable
# Remove an address
Get-FGTFirewallAddress -name "MyNetwork" | Remove-FGTFirewallAddress
Confirm
Are you sure you want to perform this action?
Performing the operation "Remove Firewall Address" on target "MyNetwork".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"):Y
#You can also create other address type like fqdn, iprange or geography
# Create an address (type fqdn)
Add-FGTFirewallAddress -Name FortiPower -fqdn fortipower.github.io
name : FortiPower
q_origin_key : FortiPower
uuid : 98af3292-3d6e-51eb-f488-f04057fbb871
type : fqdn
sub-type : sdn
clearpass-spt : unknown
start-mac : 00:00:00:00:00:00
end-mac : 00:00:00:00:00:00
fqdn : fortipower.github.io
country :
cache-ttl : 0
sdn :
fsso-group : {}
interface :
comment :
visibility : enable
associated-interface :
color : 0
filter :
sdn-addr-type : private
obj-id :
list : {}
tagging : {}
allow-routing : disable
# Create an address (type iprange)
Add-FGTFirewallAddress -Name MyRange -startip 192.0.2.1 -endip 192.0.2.100
name : MyRange
q_origin_key : MyRange
uuid : a683a420-3d6e-51eb-5c90-f471f85943e8
type : iprange
sub-type : sdn
clearpass-spt : unknown
start-mac : 00:00:00:00:00:00
end-mac : 00:00:00:00:00:00
start-ip : 192.0.2.1
end-ip : 192.0.2.100
country :
cache-ttl : 0
sdn :
fsso-group : {}
interface :
comment :
visibility : enable
associated-interface :
color : 0
filter :
sdn-addr-type : private
obj-id :
list : {}
tagging : {}
allow-routing : disable
# Create an address (type geography)
Add-FGTFirewallAddress -name MyCountry -country FR
name : MyCountry
q_origin_key : MyCountry
uuid : 7cca6b06-f8ab-51ec-8db4-a82384435e50
type : geography
country : FR
cache-ttl : 0
sdn :
comment :
visibility : enable
associated-interface :
color : 0
filter :
obj-id :
list : {}
tagging : {}
allow-routing : disable
# Create an address (type mac)
Add-FGTFirewallAddress -Name MyMAC -mac 01:02:03:04:05:06
name : MyMAC
q_origin_key : MyMAC
uuid : eabaa884-c42d-51ee-4a87-4605a5021da9
type : mac
sub-type : sdn
clearpass-spt : unknown
macaddr : {@{macaddr=01:02:03:04:05:06; q_origin_key=01:02:03:04:05:06}}
country :
cache-ttl : 0
sdn :
fsso-group : {}
interface :
obj-type : ip
tag-detection-level :
tag-type :
dirty : dirty
comment :
associated-interface :
color : 0
filter :
sdn-addr-type : private
node-ip-only : disable
obj-id :
list : {}
tagging : {}
allow-routing : disable
fabric-object : disable
Filtering
For Invoke-FGTRestMethod, it is possible to use -filter parameter
You need to use FortiGate API syntax :
| Key | Operator | Pattern | Full Request | Description |
|---|---|---|---|---|
| schedule | == | always | GET /api/v2/cmdb/firewall/policy/?filter=schedule==always | Only return firewall policy with schedule 'always' |
| schedule | != | always | GET /api/v2/cmdb/firewall/policy/?filter=schedule!=always | Return all firewall policy with schedule other than 'always' |
and Filter Operators :
| Operator | Description |
|---|---|
| == | Case insensitive match with pattern. |
| != | Does not match with pattern (case insensitive). |
| =@ | Pattern found in object value (case insensitive). |
| !@ | Pattern not found in object value (case insensitive). |
| <= | Value must be less than or equal to pattern. |
| < | Value must be less than pattern. |
| >= | Value must be greater than or equal to pattern. |
| > | Value must be greater than pattern. |
For Invoke-FGTRestMethod and Get-XXX cmdlet like Get-FGTFirewallAddress, it is possible to using some helper filter (-filter_attribute, -filter_type, -filter_value)
# Get Firewall Address named myFGT
Get-FGTFirewallAddress -name myFGT
...
# Get Firewall Address contains myFGT
Get-FGTFirewallAddress -name myFGT -filter_type contains
...
# Get Firewall Address where subnet equal 192.0.2.0 255.255.255.0
Get-FGTFirewallAddress -filter_attribute subnet -filter_type equal -filter_value 192.0.2.0 255.255.255.0
...
Actually, support only equal and contains filter type
Address Group
You can create a new Address Group Add-FGTFirewallAddressGroup, retrieve its information Get-FGTFirewallAddressGroup,
modify its properties Set-FGTFirewallAddressGroup, copy/clone its properties Copy-FGTFirewallAddressGroup,
Add member to Address Group Add-FGTFirewallAddressGroupMember and remove member Remove-FGTFirewallAddressGroupMember,
or delete it Remove-FGTFirewallAddressGroup.
# Get information about ALL address Group (using Format Table)
Get-FGTFirewallAddressgroup | Format-Table
q_origin_key name uuid member
------------ ---- ---- ------
My Address Group My Address Group 292f6eaa-2613-51ea-866d-06cedca8805 {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_ke…
# Add an address Group with FGT1 and FGT2
Add-FGTFirewallAddressGroup -name "My Address Group" -member FGT1, FGT2
q_origin_key : My Address Group
name : My Address Group
uuid : 292f6eaa-2613-51ea-866d-06cedca8805
member : {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_key=FGT2; name=FGT2}}
comment :
visibility : enable
color : 0
tagging : {}
allow-routing : disable
# Add FGT3 member to existing address Group
Get-FGTFirewallAddressGroup -name "My Address Group" | Add-FGTFirewallAddressGroupMember -member FGT3
q_origin_key : MyAddressGroup
name : MyAddressGroup
uuid : 292f6eaa-2613-51ea-866d-06cedca8805a
member : {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_key=FGT2; name=FGT2}, @{q_origin_key=FGT3; name=FGT3}}
comment :
visibility : enable
color : 0
tagging : {}
allow-routing : disable
# Remove FGT2 member to existing address Group
Get-FGTFirewallAddressGroup -name "My Address Group" | Remove-FGTFirewallAddressGroupMember -member FGT2
q_origin_key : My Address Group
name : My Address Group
uuid : 292f6eaa-2613-51ea-866d-06cedca8805a
member : {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_key=FGT3; name=FGT3}}
comment :
visibility : enable
color : 0
tagging : {}
allow-routing : disable
# Modify an address (comment, member...)
Get-FGTFirewallAddressGroup -name "My Address Group" | Set-FGTFirewallAddressGroup -comment "My Address Group with only FGT2" -member FGT2
q_origin_key : My Address Group
name : My Address Group
uuid : 292f6eaa-2613-51ea-866d-06cedca8805a
member : {@{q_origin_key=FGT2; name=FGT2}}
comment : My Address Group with only FGT2
visibility : enable
color : 0
tagging : {}
allow-routing : disable
# Copy/Clone an address Group
Get-FGTFirewallAddressGroup -name "My Address Group" | Copy-FGTFirewallAddressGroup -name "My New Address Group"
q_origin_key : My New Address Group
name : My New Address Group
uuid : 9c2673a8-2614-51ea-9ab0-dfbd6f2c0475
member : {@{q_origin_key=FGT2; name=FGT2}}
comment : My Address Group with only FGT2
visibility : enable
color : 0
tagging : {}
allow-routing : disable
# Remove an address Group
Get-FGTFirewallAddressGroup -name "My Address Group" | Remove-FGTFirewallAddressGroup
Confirm
Are you sure you want to perform this action?
Performing the operation "Remove Firewall Address Group" on target "My Address Group".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): YVirtual IP
You can create a new Virtual IP Add-FGTFirewallVip, retrieve its information Get-FGTFirewallVip,
or delete it Remove-FGTFirewallVip.
# Get information about ALL Virtual IP (using Format Table)
Get-FGTFirewallVip | Format-Table
q_origin_key name id uuid comment type dns-mapping-ttl ldb-method src-filter service
------------ ---- -- ---- ------- ---- --------------- ---------- ---------- -------
myVIP1 myVIP1 0 3ccb44c6-2662-51ea-a469-3148c8eff287 static-nat 0 static {} {}
myVIP3-8080 myVIP3-8080 0 73989828-2662-51ea-c969-4ad22d450075 static-nat 0 static {} {}
# Add a Virtual IP with Static NAT (192.2.0.1 => 198.51.100.1)
Add-FGTFirewallVip -name myVIP1 -type static-nat -extip 192.2.0.1 -mappedip 198.51.100.1
q_origin_key : myVIP1
name : myVIP1
id : 0
uuid : 3ccb44c6-2662-51ea-a469-3148c8eff287
comment :
type : static-nat
dns-mapping-ttl : 0
ldb-method : static
src-filter : {}
service : {}
extip : 192.2.0.1
extaddr : {}
mappedip : {@{q_origin_key=198.51.100.1; range=198.51.100.1}}
[...]
# Add a Virtual IP with Static NAT and Port Forward (192.2.0.2:8080 => 198.51.100.2:80)
Add-FGTFirewallVip -name myVIP2-8080to80 -type static-nat -extip 192.2.0.2 -mappedip 198.51.100.2 -portforward -extport 8080 -mappedport 80
q_origin_key : myVIP2-8080to80
name : myVIP2-8080to80
id : 0
uuid : 73989828-2662-51ea-c969-4ad22d450075
comment :
type : static-nat
dns-mapping-ttl : 0
ldb-method : static
src-filter : {}
service : {}
extip : 192.2.0.2
extaddr : {}
mappedip : {@{q_origin_key=198.51.100.2; range=198.51.100.2}}
mapped-addr :
extintf : any
arp-reply : enable
server-type :
persistence : none
nat-source-vip : disable
portforward : enable
protocol : tcp
extport : 8080
mappedport : 80
[...]
# Remove a Virtual IP
Get-FGTFirewallVip -name myVIP1 | Remove-FGTFirewallVip
Confirm
Are you sure you want to perform this action?
Performing the operation "Remove Firewall VIP" on target "myVIP1".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): YVirtual IP Group
You can create a new VIP Group Add-FGTFirewallVIPGroup, retrieve its information Get-FGTFirewallVIPGroup,
modify its properties Set-FGTFirewallVIPGroup, copy/clone its properties Copy-FGTFirewallVIPGroup,
Add member to Address Group Add-FGTFirewallVIPGroupMember and remove member Remove-FGTFirewallVIPGroupMember,
or delete it Remove-FGTFirewallVIPGroup.
# Get information about ALL VIP Group (using Format Table)
Get-FGTFirewallVipGroup | Format-Table
name q_origin_key uuid interface color comments member
---- ------------ ---- --------- ----- -------- ------
MyVIPGroup MyVIPGroup cb875532-3d82-51eb-f120-075c29c10657 any 0 {@{name=myVIP1; q_origin_key=myVIP1}, @{name=myVIP2; q_origin_key=myVIP2}}
# Add a VIP Group with myVIP1 and myVIP2
Add-FGTFirewallVIPGroup -name "MyVIPGroup" -member myVIP1, myVIP2
name : MyVIPGroup
q_origin_key : MyVIPGroup
uuid : cb875532-3d82-51eb-f120-075c29c10657
interface : any
color : 0
comments :
member : {@{name=myVIP1; q_origin_key=myVIP1}, @{name=myVIP2; q_origin_key=myVIP2}}
# Add myVIP3 member to existing Virtual IP GROUP
Get-FGTFirewallVIPGroup -name "MyVIPGroup" | Add-FGTFirewallVIPGroupMember -member myVIP3
name : MyVIPGroup
q_origin_key : MyVIPGroup
uuid : cb875532-3d82-51eb-f120-075c29c10657
interface : any
color : 0
comments :
member : {@{name=myVIP1; q_origin_key=myVIP1}, @{name=myVIP2; q_origin_key=myVIP2}, @{name=myVIP3; q_origin_key=myVIP3}}
# Remove myVIP2 member to existing Virtual IP Group
Get-FGTFirewallVIPGroup -name "MyVIPGroup" | Remove-FGTFirewallVIPGroupMember -member myVIP2
name : MyVIPGroup
q_origin_key : MyVIPGroup
uuid : cb875532-3d82-51eb-f120-075c29c10657
interface : any
color : 0
comments :
member : {@{name=myVIP1; q_origin_key=myVIP1}, @{name=myVIP3; q_origin_key=myVIP3}}
# Modify a Virtual IP Group
Get-FGTFirewallVIPGroup -name "MyVIPGroup" | Set-FGTFirewallVIPGroup -comment "My Virtual IP with only myVIP2" -member myVIP2
name : MyVIPGroup
q_origin_key : MyVIPGroup
uuid : cb875532-3d82-51eb-f120-075c29c10657
interface : any
color : 0
comments : My Virtual IP with only myVIP2
member : {@{name=myVIP2; q_origin_key=myVIP2}}
# Remove a Virtual IP Group
Get-FGTFirewallVIPGroup -name "MyVIPGroup" | Remove-FGTFirewallVIPGroup
Confirm
Are you sure you want to perform this action?
Performing the operation "Remove Firewall VIP Group" on target "MyVIPGroup".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): yPolicy
You can create a new Policy Add-FGTFirewallPolicy, retrieve its information Get-FGTFirewallPolicy
Add member to source or destinationn address Add-FGTFirewallPolicyMember and remove member Add-FGTFirewallPolicyMember,
set it Set-FGTFirewallPolicy or delete it Remove-FGTFirewallPolicy.
# Get information about ALL Policies (using Format Table)
Get-FGTFirewallPolicy | Format-Table
q_origin_key policyid name uuid srcintf dstintf srcaddr
------------ -------- ---- ---- ------- ------- -------
1 1 MyFGTPolicy 31a7ad9e-266e-51ea-1691-4906abad2e8b {@{q_origin_key=port1; name=port1}} {@{q_origin_key=port2; name=port2}} {@{q_origin_key=all; name=all}
2 2 MyFGTPolicy2 3c8e5212-266e-51ea-2300-dc5fcb1a8e2a {@{q_origin_key=port1; name=port1}} {@{q_origin_key=port3; name=port3}} {@{q_origin_key=all; name=all}}
# Add Policy (MyFGTPolicy) allow ALL traffic between port1 to port2
Add-FGTFirewallPolicy -name MyFGTPolicy -srcintf port1 -dstintf port2 -srcaddr all -dstaddr all
q_origin_key : 1
policyid : 1
name : MyFGTPolicy
uuid : 31a7ad9e-266e-51ea-1691-4906abad2e8b
srcintf : {@{q_origin_key=port1; name=port1}}
dstintf : {@{q_origin_key=port2; name=port2}}
srcaddr : {@{q_origin_key=all; name=all}}
dstaddr : {@{q_origin_key=all; name=all}}
internet-service : disable
internet-service-id : {}
internet-service-custom : {}
internet-service-src : disable
internet-service-src-id : {}
internet-service-src-custom : {}
rtp-nat : disable
rtp-addr : {}
learning-mode : disable
action : accept
send-deny-packet : disable
firewall-session-dirty : check-all
status : enable
schedule : always
schedule-timeout : disable
service : {@{q_origin_key=ALL; name=ALL}}
[...]
# Add Policy (MyFGTPolicy2) allow ALL traffic between port1 to port3 and enable NAT (but disable rule)
Add-FGTFirewallPolicy -name MyFGTPolicy2 -srcintf port1 -dstintf port3 -srcaddr all -dstaddr all -nat -status:$false -skip
q_origin_key : 2
policyid : 2
name : MyFGTPolicy2
uuid : 6ad55b33-e514-4d60-a661-6addfe7b3ac8
srcintf : {@{q_origin_key=port1; name=port1}}
dstintf : {@{q_origin_key=port3; name=port3}}
srcaddr : {@{q_origin_key=all; name=all}}
dstaddr : {@{q_origin_key=all; name=all}}
internet-service : disable
internet-service-src : disable
rtp-nat : disable
learning-mode : disable
action : accept
status : disable
schedule : always
schedule-timeout : disable
[...]
# Add FGT2 and FGT3 to source address (only FGT1 before)
Get-FGTFirewallPolicy -name MyFGTPolicy3 | Add-FGTFirewallPolicyMember -srcaddr FGT1, FGT2
q_origin_key : 3
policyid : 3
name : MyFGTPolicy3
uuid : d7d0fa66-3352-51ec-52cf-a215389b0ddb
srcintf : {@{q_origin_key=port1; name=port1}}
dstintf : {@{q_origin_key=port2; name=port2}}
srcaddr : {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_key=FGT2; name=FGT2}, @{q_origin_key=FGT3;name=FGT3}}
dstaddr : {@{q_origin_key=all; name=all}}
internet-service : disable
internet-service-src : disable
rtp-nat : disable
learning-mode : disable
action : accept
status : disable
schedule : always
schedule-timeout : disable
[...]
# Remove FGT3 from destination address (FGT1, FGT2, FGT3 before)
Get-FGTFirewallPolicy -name MyFGTPolicy3 | Remove-FGTFirewallPolicyMember -srcaddr FGT3
q_origin_key : 3
policyid : 3
name : MyFGTPolicy3
uuid : d7d0fa66-3352-51ec-52cf-a215389b0ddb
srcintf : {@{q_origin_key=port1; name=port1}}
dstintf : {@{q_origin_key=port2; name=port2}}
srcaddr : {@{q_origin_key=all; name=all}}
dstaddr : {@{q_origin_key=FGT1; name=FGT1}, @{q_origin_key=FGT2; name=FGT2}}
internet-service : disable
internet-service-src : disable
rtp-nat : disable
learning-mode : disable
action : accept
status : disable
schedule : always
schedule-timeout : disable
[...]
# Move a Policy (MyFGTPolicy2 after MyFGTPolicy3)
Get-FGTFirewallPolicy -name MyFGTPolicy2 | Move-FGTFirewallPolicy -after (Get-FGTFirewallPolicy -name MyFGTPolicy3)
q_origin_key : 2
policyid : 2
name : MyFGTPolicy2
uuid : 6ad55b33-e514-4d60-a661-6addfe7b3ac8
[...]
# Move a Policy (MyFGTPolicy3 before MyFGTPolicy2) with ask confirm
Get-FGTFirewallPolicy -name MyFGTPolicy3 | Move-FGTFirewallPolicy -before (Get-FGTFirewallPolicy -name MyFGTPolicy2) -confirm
Confirm
Are you sure you want to perform this action?
Performing the operation "Move Firewall Policy" on target "MyFGTPolicy3".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"):
q_origin_key : 3
policyid : 3
name : MyFGTPolicy3
uuid : d7d0fa66-3352-51ec-52cf-a215389b0ddb
[...]
# Change a Policy Settings (Security Profiles with default profiles)
Get-FGTFirewallPolicy -name MyFGTPolicy3 | Set-FGTFirewallPolicy -avprofile default -webfilterprofile default -dnsfilterprofile default -applicationlist default -ipssensor default
q_origin_key : 3
policyid : 3
name : MyFGTPolicy3
uuid : d7d0fa66-3352-51ec-52cf-a215389b0ddb
[...]
av-profile : default
webfilter-profile : default
dnsfilter-profile : default
application-list : default
ips-sensor : default
# Remove a Policy
Get-FGTFirewallPolicy -name MyFGTPolicy2 | Remove-FGTFirewallPolicy
Remove Policy on Fortigate
Proceed with removal of Policy MyFGTPolicy2 ?
[Y] Yes [N] No [?] Help (default is "N"): yZone
You can create a new Zone Add-FGTSystemZone, retrieve its information Get-FGTFSystemZone,
modify its properties Set-SystemZone,
Add member to Zone Add-SystemZoneMember and remove member Remove-SystemZoneMember,
or delete it Remove-SystemZone.
# Get information about ALL Zone
Get-FGTSystemZone
name : myPowerFGTZone
q_origin_key : myPowerFGTZone
tagging : {}
description :
intrazone : deny
interface : {@{interface-name=port5; q_origin_key=port5}, @{interface-name=port6; q_origin_key=port6}}
# Add new Zone myPowerFGTZone2 with port7 and intrazone allowed
Add-FGTSystemZone -name myPowerFGTZone2 -intrazone allow -interfaces port7
name : myPowerFGTZone2
q_origin_key : myPowerFGTZone2
tagging : {}
description :
intrazone : allow
interface : {@{interface-name=port7; q_origin_key=port7}}
# Add new member (port8) to existing zone myPowerFGTZone2
Get-FGTSystemZone -name myPowerFGTZone2 | Add-FGTSystemZoneMember -interfaces port8
name : myPowerFGTZone2
q_origin_key : myPowerFGTZone2
tagging : {}
description :
intrazone : allow
interface : {@{interface-name=port7; q_origin_key=port7}, @{interface-name=port8; q_origin_key=port8}}
# Remove port7 member to existing zone myPowerFGTZone2
Get-FGTSystemZone -name myPowerFGTZone2 | Remove-FGTSystemZoneMember -interfaces port7
name : myPowerFGTZone2
q_origin_key : myPowerFGTZone2
tagging : {}
description :
intrazone : allow
interface : {@{interface-name=port8; q_origin_key=port8}}
# Modify a Zone (intrazone, interface...)
Get-FGTSystemZone -name myPowerFGTZone2 | Set-FGTSystemZone -intrazone deny
name : myPowerFGTZone2
q_origin_key : myPowerFGTZone2
tagging : {}
description :
intrazone : deny
interface : {@{interface-name=port8; q_origin_key=port8}}
# Remove a zone
Get-FGTSystemZone -name myPowerFGTZone2 | Remove-FGTSystemZone
Confirm
Are you sure you want to perform this action?
Performing the operation "Remove zone" on target "myPowerFGTZone2".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): YStatic Route
You can create a new Static Route Add-FGTRouterStatic, retrieve its information Get-FGTRouterStatic,
or delete it Remove-FGTRouterStatic.
# Get information about ALL Static Route (using Format Table)
Get-FGTRouterStatic | Format-Table
seq-num q_origin_key status dst src gateway distance weight priority device
------- ------------ ------ --- --- ------- -------- ------ -------- ------
2 2 enable 192.0.2.0 255.255.255.0 0.0.0.0 0.0.0.0 198.51.100.254 10 0 0 port1
3 3 enable 198.51.100.0 255.255.255.0 0.0.0.0 0.0.0.0 192.0.2.254 10 0 0 port2
# Add Static Route to 192.0.2.0/24 via 198.51.100.254 from port1
Add-FGTRouterStatic -dst 192.0.2.0/24 -gateway 198.51.100.254 -device port1
seq-num : 2
q_origin_key : 2
status : enable
dst : 192.0.2.0 255.255.255.0
src : 0.0.0.0 0.0.0.0
gateway : 198.51.100.254
distance : 10
weight : 0
priority : 0
device : port1
comment :
blackhole : disable
dynamic-gateway : disable
sdwan-zone : {}
dstaddr :
internet-service : 0
internet-service-custom :
link-monitor-exempt : disable
vrf : 0
bfd : disable
[...]
# Add Static Route to 198.51.100.0/24 via 192.0.2.254 from port2
Add-FGTRouterStatic -dst 198.51.100.0/24 -gateway 192.0.2.254 -device port2
seq-num : 3
q_origin_key : 3
status : enable
dst : 198.51.100.0 255.255.255.0
src : 0.0.0.0 0.0.0.0
gateway : 192.0.2.254
distance : 10
weight : 0
priority : 0
device : port2
comment :
blackhole : disable
dynamic-gateway : disable
sdwan-zone : {}
dstaddr :
internet-service : 0
internet-service-custom :
link-monitor-exempt : disable
vrf : 0
bfd : disable
[...]
# Remove a Static Route
Get-FGTRouterStatic -filter_attribute seq-num -filter_type equal -filter_value 2 | Remove-FGTRouterStatic
Confirm
Are you sure you want to perform this action?
Performing the operation "Remove Router Static" on target "2".
[Y] Yes [N] No [?] Help (default is "N"): yInterface
You can create a new interface (Vlan ...) Add-FGTSystemInterface, retrieve its information Get-FGTSystemInterface,
modify its properties Set-FGTSystemInterface or delete it Remove-FGTSystemInterface.
# Get information about ALL Interface (using Format Table)
Get-FGTSystemInterface | Format-Table
name q_origin_key vdom vrf cli-conn-status fortilink switch-controller-source-ip mode client-options distance
---- ------------ ---- --- --------------- --------- --------------------------- ---- -------------- --------
fortilink fortilink root 0 0 enable outbound static {} 5
l2t.root l2t.root root 0 0 disable outbound static {} 5
naf.root naf.root root 0 0 disable outbound static {} 5
port1 port1 root 0 0 disable outbound static {} 5
port2 port2 root 0 0 disable outbound static {} 5
port3 port3 root 0 0 disable outbound static {} 5
port4 port4 root 0 0 disable outbound static {} 5
port5 port5 root 0 0 disable outbound static {} 5
port6 port6 root 0 0 disable outbound static {} 5
port7 port7 root 0 0 disable outbound static {} 5
port8 port8 root 0 0 disable outbound static {} 5
port9 port9 root 0 0 disable outbound static {} 5
port10 port10 root 0 0 disable outbound static {} 5
ssl.root ssl.root root 0 0 disable outbound static {} 5
# Create an interface (type vlan)
Add-FGTSystemInterface -vlan_id 23 -interface port9 -name "PowerFGT_vlan23"
name : PowerFGT_vlan23
q_origin_key : PowerFGT_vlan23
vdom : root
vrf : 0
cli-conn-status : 0
fortilink : disable
switch-controller-source-ip : outbound
mode : static
[...]
# Create an interface (type LACP)
Add-FGTSystemInterface -name PowerFGT_lacp -atype lacp -member port9, port10
name : PowerFGT_lacp
q_origin_key : PowerFGT_lacp
vdom : root
vrf : 0
[...]
type : aggregate
[...]
member : {@{interface-name=port9; q_origin_key=port9}, @{interface-name=port10; q_origin_key=port10}}
lacp-mode : active
[...]
# Create an interface (type Loopback)
Add-FGTSystemInterface -name PowerFGT_lo -loopback -mode static -ip 192.0.2.1 -netmask 255.255.255.255 -allowaccess ping
name : PowerFGT_lo
q_origin_key : PowerFGT_lo
vdom : root
[...]
ip : 192.0.2.1 255.255.255.255
allowaccess : ping
type : loopback
[...]
# Get information an Interface (name) and display only some field (using Format-Table)
Get-FGTSystemInterface -name PowerFGT_vlan23 | select name, vlanid, ip
name vlanid ip
---- ------ --
PowerFGT_vlan23 23 0.0.0.0 0.0.0.0
# Modify an interface (description, ip ...)
Get-FGTSystemInterface -name PowerFGT_vlan23 | Set-FGTSystemInterface -alias ALIAS_PowerFGT -role lan -mode static -ip 192.0.2.1 -netmask 255.255.255.0 -allowaccess ping,https
name : PowerFGT_vlan23
q_origin_key : PowerFGT_vlan23
vdom : root
[...]
ip : 192.0.2.1 255.255.255.0
allowaccess : ping https
[...]
interface : port9
external : disable
vlan-protocol : 8021q
vlanid : 23
[...]
description :
alias : ALIAS_PowerFGT
[...]
role : lan
[...]
# Add (append) allowaccess with SSH
Get-FGTSystemInterface -name PowerFGT_vlan23 | Add-FGTSystemInterfaceMember -allowaccess ssh | select name, allowaccess
name allowaccess
---- -----------
PowerFGT_vlan23 ping https ssh
# Remove allowaccess (https)
Get-FGTSystemInterface -name PowerFGT_vlan23 | Remove-FGTSystemInterfaceMember -allowaccess https | select name, allowaccess
name allowaccess
---- -----------
PowerFGT_vlan23 ping ssh
# Remove an interface
Get-FGTSystemInterface -name PowerFGT_vlan23 | Remove-FGTSystemInterface
Confirm
Are you sure you want to perform this action?
Performing the operation "Remove interface" on target "PowerFGT_vlan23".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): YSecurity Profiles
You can change System Settings and System Global (settings) using Set-FGTSystemSettings and Set-FGTSystemGlobal
It is possible to Get Security Profiles (Antivirus, Application Control, DNS Filter, ISDB, SSL/SSH, IPS)
Get-FGTAntivirusProfileList and Settings of AntivirusGet-FGTApplicationListList and Settings of Application (List)Get-FGTDnsfilterProfileList and Settings of DNS Filter ProfileGet-FGTFirewallInternetServiceNameList of Internet Service Name (ISDB)Get-FGTFirewallSSLSSHProfileList and Settings of SSL/SSH ProfileGet-FGTIpsSensorList and Settings of IPS Sensor
Settings
You can change System Settings and System Global (settings) using Set-FGTSystemSettings and Set-FGTSystemGlobal
# Get ALL information about System Global
Get-FGTSystemGlobal
language : english
gui-ipv6 : disable
gui-replacement-message-groups : disable
gui-local-out : disable
gui-certificates : enable
gui-custom-language : disable
gui-wireless-opensecurity : disable
gui-display-hostname : disable
gui-fortigate-cloud-sandbox : disable
gui-firmware-upgrade-warning : enable
gui-allow-default-hostname : disable
gui-forticare-registration-setup-warning : enable
gui-cdn-usage : enable
admin-https-ssl-versions : tlsv1-2
[...]
# Get only admintimeout and admin-sport of System Global
Get-FGTSystemGlobal -Name admintimeout, admin-sport
admintimeout admin-sport
------------ -----------
5 443
# Configure admintimeout and admin-sport of System Global
Set-FGTSystemGlobal -admintimeout 30 -admin_sport 8443
[...]
admintimeout : 30
[...]
admin-sport : 8443
[...]
# for configure a setting not yet available on parameter of Set-FGTSystemGlobal, you can use
$data = @{ "two-factor-sms-expiry" = 120 }
Set-FGTSystemGlobal -data $data
[...]
two-factor-sms-expiry : 120
[...]
# Get ALL information about System Settings
Get-FGTSystemSettings
comments :
opmode : nat
ngfw-mode : profile-based
http-external-dest : fortiweb
firewall-session-dirty : check-all
manageip :
gateway : 0.0.0.0
ip : 0.0.0.0 0.0.0.0
manageip6 : ::/0
gateway6 : ::
ip6 : ::/0
device :
bfd : disable
[...]
# Get only gui-allow-unnamed-policy and opmode of System Settings
Get-FGTSystemSettings -Name gui-allow-unnamed-policy, opmode
gui-allow-unnamed-policy opmode
------------------------ ------
disable nat
# Configure gui-allow-unnamed-policy of System Settings
Set-FGTSystemSettings -gui_allow_unnamed_policy
[...]
gui-allow-unnamed-policy : enable
[...]
# for configure a setting not yet available on parameter of Set-FGTSystemSettings, you can use
$data = @{ "location-id" = "192.0.2.1" }
Set-FGTSystemSettings -data $data
[...]
location-id : 192.0.2.1
[...]
VPN IPsec
VPN IPsec Interface Phase 1
You can create a new VPN IPsec (Interface Phase1) Add-FGTVpnIpsecPhase1Interface,
retrieve its information Get-FGTVpnIpsecPhase1Interface, modify its properties Set-FGTVpnIpsecPhase1Interface
or delete it Remove-FGTVpnIpsecPhase1Interface.
# Create a static VPN IPsec Phase 1 Interface named PowerFGT_VPN with interface port2 with Remote Gateway 192.0.2.1
Add-FGTVpnIpsecPhase1Interface -name PowerFGT_VPN -type static -interface port2 -psksecret MySecret -remotegw 192.0.2.1
name : PowerFGT_VPN
q_origin_key : PowerFGT_VPN
type : static
interface : port2
ip-version : 4
ike-version : 1
local-gw : 0.0.0.0
local-gw6 : ::
remote-gw : 192.0.2.1
[...]
# Get information about ALL VPN IPsec Phase 1 Interface (using Format Table)
Get-FGTVpnIpsecPhase1Interface | Format-Table
name q_origin_key type interface ip-version ike-version local-gw local-gw6 remote-gw remote-gw6
---- ------------ ---- --------- ---------- ----------- -------- --------- --------- ----------
PowerFGT_VPN PowerFGT_VPN static port2 4 1 0.0.0.0 :: 192.0.2.1 ::
PowerFGT_VPN2 PowerFGT_VPN2 dynamic port2 4 2 0.0.0.0 :: 0.0.0.0 ::
# Modify a VPN IPsec 1 Interface (dhgrp, autodiscovery ...)
Get-FGTVpnIpsecPhase1Interface PowerFGT_VPN | Set-FGTVpnIpsecPhase1Interface -dhgrp 14 -autodiscoverysender
name : PowerFGT_VPN
q_origin_key : PowerFGT_VPN
type : static
interface : port2
ip-version : 4
ike-version : 1
local-gw : 0.0.0.0
local-gw6 : ::
remote-gw : 192.0.2.1
[...]
dhgrp : 14
[...]
auto-discovery-sender : enable
# Remove a VPN IPsec 1 Interface
Get-FGTVpnIpsecPhase1Interface PowerFGT_VPN | Remove-FGTVpnIpsecPhase1Interface
Confirm
Are you sure you want to perform this action?
Performing the operation "Remove Vpn IPsec Phase 1 Interface" on target "PowerFGT_VPN".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): yVPN IPsec Interface Phase 2
You can create a new VPN IPsec (Interface Phase2) Add-FGTVpnIpsecPhase2Interface,
retrieve its information Get-FGTVpnIpsecPhase2Interface, modify its properties Set-FGTVpnIpsecPhase2Interface
or delete it Remove-FGTVpnIpsecPhase2Interface.
You need to have VPN IPsec Interface Phase 1 created before
# Create a VPN IPsec Phase 2 Interface named ph2_PowerFGT_VPN based on PowerFGT_VPN phase 1 with source network VPN_LOCAL and desination network VPN_REMOTE
Get-FGTVpnIpsecPhase1Interface -name PowerFGT_VPN | Add-FGTVpnIpsecPhase2Interface -name ph2_PowerFGT_VPN -srcname VPN_LOCAL -dstname VPN_REMOTE
name : ph2_PowerFGT_VPN
q_origin_key : ph2_PowerFGT_VPN
phase1name : PowerFGT_VPN
[...]
src-name : VPN_LOCAL
src-name6 :
src-addr-type : name
src-end-ip6 : ::
src-port : 0
dst-name : VPN_REMOTE
dst-name6 :
dst-addr-type : name
dst-end-ip6 : ::
dst-port : 0
# Get information about ALL VPN IPsec Phase 2 Interface (using Format Table)
Get-FGTVpnIpsecPhase2Interface | Format-Table
name q_origin_key phase1name dhcp-ipsec proposal pfs ipv4-df dhgrp replay keepalive
---- ------------ ---------- ---------- -------- --- ------- ----- ------ ---------
ph2_PowerFGT_VPN ph2_PowerFGT_VPN PowerFGT_VPN disable aes256-sha1 enable disable 14 5 enable disable
# Modify a VPN IPsec 2 Interface (comments ...)
Get-FGTVpnIpsecPhase2Interface ph2_PowerFGT_VPN | Set-FGTVpnIpsecPhase2Interface -comments "My PowerFGT IPsec Phase2"
name : ph2_PowerFGT_VPN
q_origin_key : ph2_PowerFGT_VPN
phase1name : PowerFGT_VPN
[...]
comments : My PowerFGT IPsec Phase2
[...]
# Remove a VPN IPsec 2 Interface
Get-FGTVpnIpsecPhase2Interface ph2_PowerFGT_VPN | Remove-FGTVpnIpsecPhase2Interface
Confirm
Are you sure you want to perform this action?
Performing the operation "Remove Vpn IPsec Phase 2 Interface" on target "ph2_PowerFGT_VPN".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): YMonitor
It is possible to monitor FortiGate
Get-FGTMonitorFirewallPolicyList traffic statistics for firewall policiesGet-FGTMonitorFirewallSessionList all active firewall sessionsGet-FGTMonitorRouterIPv4List all active IPv4 routing table entriesGet-FGTMonitorLicenseStatusGet current license & registration statusGet-FGTMonitorNetworkARPGet IPv4 ARP tableGet-FGTMonitorSystemConfigBackupBackup system configGet-FGTMonitorSystemFirmwareRetrieve a list of firmware images available to use for upgrade on this deviceGet-FGTMonitorSystemHAChecksumList of checksums for members of HA clusterGet-FGTMonitorSystemHAPeerGet configuration of peer(s) in HA clusterGet-FGTMonitorUtmApplicationCategoriesGet list of (UTM) Application CategoriesGet-FGTMonitorVpnIPsecReturn active IPsec VPNsGet-FGTMonitorVpnSslRetrieve a list of all SSL-VPN sessions and sub-sessions and Return statistics about the SSL-VPNGet-FGTMonitorWebfilterCategoriesReturn FortiGuard web filter categories
to get API uri, you can use Invoke-FGTRestMethod api/v2/monitor/?action=schema for get list of uri for monitor
Log Traffic
It is possible to get log traffic of FortiGate.
You can get the following type log
- disk
- fortianalyzer
- forticloud
- memory
and subtype
- forward
- local
- multicast
- sniffer
- fortiview
- threat
by default, it is only first 20 rows availables (use -rows parameter )’ /!\ you can get issue if you ask too many rows on small appliance /!\
can also filter by
- Source IP (-srcip)
- Source Interface (-srcintf)
- Destination IP (-dstip)
- Destination Interface (-dstintf)
- Destination Port (-dstport)
- Action (-action)
- Policy ID (-policyid)
- Policy UUID (-poluuid)
for Example
#Get Log Traffic from memory on subtype forward and 10 000 rows
Get-FGTLogTraffic -type memory -subtype forward -rows 10000 | Format-Table
date time eventtime tz logid type subtype level vd srcip
---- ---- --------- -- ----- ---- ------- ----- -- -----
2022-03-06 22:52:28 1646635948633219391 -0800 0000000013 traffic forward notice root 103.39.247.123
2022-03-06 22:52:28 1646635948603208109 -0800 0000000013 traffic forward notice root 103.39.247.123
2022-03-06 22:52:28 1646635948593207059 -0800 0000000013 traffic forward notice root 103.39.247.123
2022-03-06 22:52:28 1646635948483209427 -0800 0000000022 traffic forward notice root 10.88.130.131
2022-03-06 22:52:28 1646635948483206444 -0800 0000000022 traffic forward notice root 10.88.102.99
2022-03-06 22:52:28 1646635948443205594 -0800 0000000022 traffic forward notice root 10.88.110.122
2022-03-06 22:52:28 1646635948443208223 -0800 0000000022 traffic forward notice root 10.88.2.21
2022-03-06 22:52:28 1646635948333207985 -0800 0000000013 traffic forward notice root 216.251.148.178
2022-03-06 22:52:28 1646635948283206523 -0800 0000000022 traffic forward notice root 10.88.130.131
2022-03-06 22:52:27 1646635948153206637 -0800 0001000014 traffic local notice root 127.0.0.1
2022-03-06 22:52:27 1646635948083207799 -0800 0001000014 traffic local notice root 127.0.0.1
2022-03-06 22:52:27 1646635948083211212 -0800 0001000014 traffic local notice root 127.0.0.1
2022-03-06 22:52:27 1646635948163208549 -0800 0000000022 traffic forward notice root 10.88.110.122
[...]
you can also get some extra info using -extra parameter :
* reverse_lookup to get name of IP (found by the fortigate)
* country_id to get country of IP Address
You can also select the 'timeline' using -since parameter 1h(our), 1d(ay), 7d(ays), 30(days), only for Fortiguard type
You can use also `Get-FGTLogSetting` for get setting for Log (Syslogd, FortiAnalyzer...)Invoke API
for example to get Fortigate System Global Info
# get FortiGate System Global using API
(Invoke-FGTRestMethod -method "get" -uri "api/v2/cmdb/system/global").results
language : english
gui-ipv6 : disable
gui-certificates : enable
gui-custom-language : disable
gui-wireless-opensecurity : disable
gui-display-hostname : disable
gui-lines-per-page : 50
admin-https-ssl-versions : tlsv1-1 tlsv1-2
admintimeout : 120
admin-console-timeout : 0
admin-concurrent : enable
admin-lockout-threshold : 3
admin-lockout-duration : 60
refresh : 0
interval : 5
failtime : 5
daily-restart : disable
restart-time : 00:00
radius-port : 1812
admin-login-max : 100
remoteauthtimeout : 5
ldapconntimeout : 500
batch-cmdb : enable
multi-factor-authentication : optional
dst : enable
timezone : 04
traffic-priority : tos
traffic-priority-level : medium
anti-replay : strict
send-pmtu-icmp : enable
honor-df : enable
revision-image-auto-backup : disable
revision-backup-on-logout : disable
management-vdom : root
hostname : PowerFGT-FW1
[...]to get API uri, you can use api/v2/cmdb/?action=schema uri for get schema
You can look also FortiOS - REST API Reference available on Fortinet Developer Network (FNDN)
VDOM
it is possible use VDOM using -vdom parameter on cmdlet command (by default it is root vdom)
For get FGT Firewall Address of vdomX
Get-FGTFirewallAddress -vdom vdomX
[...]For get FGT Firewall Address of vdomX and root
Get-FGTFirewallAddress -vdom vdomX,root
[...]For get FGT Firewall Address of all vdom
Get-FGTFirewallAddress -vdom *
[...]You can configure the "default" vdom when connect using
Connect-FGT 192.0.2.1 -vdom vdomX
[...]You can also change default vdom using
Set-FGTConnection -vdom vdomY
[...]Proxy
There is also cmdlet for Proxy
- Proxy Address (Add/Copy/Get/Remove-FGTFirewallProxyAddress)
- Proxy Address Group (Add/Copy/Get/Set/Remove-FGTFirewallProxyAddressGroup)
- Proxy Policy (Add/Get/Remove-FGTFirewallProxyPolicy)
For Proxy Policy, it is possible to specific explict proxy or transparent For FortiGate 6.0.x, you need to enable proxy mode before (and enable feature)
Connecting with API Token
If you have a REST API administrator account setup, you can connect with the API
Connect-FGT 192.0.2.1 -ApiToken "yourtoken"You can use API Token with HTTPS (or HTTP with FortiOS > 7.0.x but not recommended)
A REST API administrator account can be setup using the following FortiOS CLI commands:
config system accprofile
edit "api_powerfgt"
set netgrp read-write
set fwgrp read-write
set vpngrp read-write
set system-diagnostics disable
next
end
config system api-user
edit "myaccount_powerfgt"
set accprofile "api_powerfgt"
config trusthost
edit 1
set ipv4-trusthost 192.0.2.0 255.255.255.0
next
end
next
endMultiConnection
From release 0.3.0, it is possible to connect on same times to multi FortiGate You need to use -connection parameter to cmdlet
For example to get interface of 2 FortiGate
# Connect to first FortiGate
$fw1 = Connect-FGT 192.0.2.1 -SkipCertificateCheck -DefaultConnection:$false
#DefaultConnection set to false is not mandatory but only don't set the connection info on global variable
# Connect to second FortiGate
$fw2 = Connect-FGT 192.0.2.2 -SkipCertificateCheck -DefaultConnection:$false
# Get Interface for first FortiGate
Get-FGTSystemInterface -connection $fw1 | Format-Table
q_origin_key name vdom vrf cli-conn-status fortilink mode distance priority dhcp-relay-service
------------ ---- ---- --- --------------- --------- ---- -------- -------- ------------------
DCFW DCFW root 0 0 disable static 5 0 enable
FITNUC FITNUC root 0 0 disable static 5 0 disable
....
# Get Interface for second FortiGate
Get-FGTSystemInterface -connection $fw2 | Format-Table
q_origin_key name vdom vrf cli-conn-status fortilink mode distance priority dhcp-relay-service
------------ ---- ---- --- --------------- --------- ---- -------- -------- ------------------
FSA-DMZ FSA-DMZ root 0 0 disable static 5 0 disable
FSA-DMZ2 FSA-DMZ2 root 0 0 disable static 5 0 disable
FWLC FWLC root 0 0 disable static 5 0 enable
...
#Each cmdlet can use -connection parameter
Disconnecting
# Disconnect from the FortiGate
Disconnect-FGTDeploy-VM
You can deploy FortiGate OVA (vapp), you need VMware.PowerCLI module and FortiGate OVF (available on support web site)
$fortiBuildParams = @{
ovf_path = "C:\FortiGate-VM64.vapp.ovf"
vm_host = "MyHost"
datastore = "MyDataStore"
Cluster = "MyCluster"
name_vm = "PowerFGT"
hostname = "PowerFGT"
dns_primary = "192.0.2.3"
dns_secondary = "192.0.2.4"
int0_network_mode = "Static"
int0_gateway = "192.0.2.254"
int0_ip = "192.0.2.1"
int0_netmask = "255.255.255.0"
int0_port_group = "PG-PowerFGT"
net_adapter = "vmxnet3"
}
Deploy-FGTVm @fortiBuildParams
PowerFGT is ready to use (http://192.0.2.1) (need to Start VM !)
Issue
Unable to connect (certificate)
if you use Connect-FGT and get Unable to Connect (certificate)
The issue coming from use Self-Signed or Expired Certificate for Firewall Management
Try to connect using Connect-FGT -SkipCertificateCheck
Unable to connect
You can use also Connect-FGT -httpOnly for connect using HTTP (NOT RECOMMENDED !)
How to contribute
Contribution and feature requests are more than welcome. Please use the following methods:
- For bugs and issues, please use the issues register with details of the problem.
- For Feature Requests, please use the issues register with details of what's required.
- For code contribution (bug fixes, or feature request), please request fork PowerFGT, create a feature/fix branch, add tests if needed then submit a pull request.
Contact
Currently, @alagoutte started this project and will keep maintaining it. Reach out to me via Twitter, Email (see top of file) or the issues Page here on GitHub. If you want to contribute, also get in touch with me.
List of available command
Add-FGTFirewallAddress
Add-FGTFirewallAddressGroup
Add-FGTFirewallAddressGroupMember
Add-FGTFirewallPolicy
Add-FGTFirewallPolicyMember
Add-FGTFirewallProxyAddress
Add-FGTFirewallProxyAddressGroup
Add-FGTFirewallProxyAddressGroupMember
Add-FGTFirewallProxyPolicy
Add-FGTFirewallVip
Add-FGTFirewallVipGroup
Add-FGTFirewallVipGroupMember
Add-FGTRouterStatic
Add-FGTSystemInterface
Add-FGTSystemInterfaceMember
Add-FGTSystemZone
Add-FGTSystemZoneMember
Add-FGTVpnIpsecPhase1Interface
Add-FGTVpnIpsecPhase2Interface
Confirm-FGTAddress
Confirm-FGTAddressGroup
Confirm-FGTFirewallPolicy
Confirm-FGTFirewallProxyPolicy
Confirm-FGTInterface
Confirm-FGTProxyAddress
Confirm-FGTProxyAddressGroup
Confirm-FGTRouterStatic
Confirm-FGTVip
Confirm-FGTVipGroup
Confirm-FGTVpnIpsecPhase1Interface
Confirm-FGTVpnIpsecPhase2Interface
Confirm-FGTZone
Connect-FGT
Copy-FGTFirewallAddress
Copy-FGTFirewallAddressGroup
Copy-FGTFirewallProxyAddress
Copy-FGTFirewallProxyAddressGroup
Copy-FGTFirewallVipGroup
Deploy-FGTVm
Disconnect-FGT
Get-FGTAntivirusProfile
Get-FGTApplicationList
Get-FGTDnsfilterProfile
Get-FGTFirewallAddress
Get-FGTFirewallAddressGroup
Get-FGTFirewallInternetServiceName
Get-FGTFirewallIPPool
Get-FGTFirewallPolicy
Get-FGTFirewallProxyAddress
Get-FGTFirewallProxyAddressGroup
Get-FGTFirewallProxyPolicy
Get-FGTFirewallServiceCustom
Get-FGTFirewallServiceGroup
Get-FGTFirewallSSLSSHProfile
Get-FGTFirewallVip
Get-FGTFirewallVipGroup
Get-FGTIpsSensor
Get-FGTLogSetting
Get-FGTLogTraffic
Get-FGTMonitorFirewallPolicy
Get-FGTMonitorFirewallSession
Get-FGTMonitorLicenseStatus
Get-FGTMonitorNetworkARP
Get-FGTMonitorRouterIPv4
Get-FGTMonitorSystemConfigBackup
Get-FGTMonitorSystemFirmware
Get-FGTMonitorSystemHAChecksum
Get-FGTMonitorSystemHAPeer
Get-FGTMonitorUtmApplicationCategories
Get-FGTMonitorVpnIPsec
Get-FGTMonitorVpnSsl
Get-FGTMonitorWebfilterCategories
Get-FGTRouterPolicy
Get-FGTRouterStatic
Get-FGTSystemAdmin
Get-FGTSystemDHCPServer
Get-FGTSystemDns
Get-FGTSystemDnsServer
Get-FGTSystemGlobal
Get-FGTSystemHA
Get-FGTSystemInterface
Get-FGTSystemSDWAN
Get-FGTSystemSettings
Get-FGTSystemVdom
Get-FGTSystemVirtualWANLink
Get-FGTSystemZone
Get-FGTUserGroup
Get-FGTUserLDAP
Get-FGTUserLocal
Get-FGTUserRADIUS
Get-FGTUserSAML
Get-FGTVpnIpsecPhase1Interface
Get-FGTVpnIpsecPhase2Interface
Get-FGTVpnSSLClient
Get-FGTVpnSSLPortal
Get-FGTVpnSSLSettings
Get-FGTWebfilterProfile
Invoke-FGTRestMethod
Move-FGTFirewallPolicy
Remove-FGTFirewallAddress
Remove-FGTFirewallAddressGroup
Remove-FGTFirewallAddressGroupMember
Remove-FGTFirewallPolicy
Remove-FGTFirewallPolicyMember
Remove-FGTFirewallProxyAddress
Remove-FGTFirewallProxyAddressGroup
Remove-FGTFirewallProxyAddressGroupMember
Remove-FGTFirewallProxyPolicy
Remove-FGTFirewallVip
Remove-FGTFirewallVipGroup
Remove-FGTFirewallVipGroupMember
Remove-FGTRouterStatic
Remove-FGTSystemInterface
Remove-FGTSystemInterfaceMember
Remove-FGTSystemZone
Remove-FGTSystemZoneMember
Remove-FGTVpnIpsecPhase1Interface
Remove-FGTVpnIpsecPhase2Interface
Set-FGTCipherSSL
Set-FGTConnection
Set-FGTFirewallAddress
Set-FGTFirewallAddressGroup
Set-FGTFirewallPolicy
Set-FGTFirewallProxyAddressGroup
Set-FGTFirewallVipGroup
Set-FGTSystemGlobal
Set-FGTSystemInterface
Set-FGTSystemSettings
Set-FGTSystemZone
Set-FGTUntrustedSSL
Set-FGTVpnIpsecPhase1Interface
Set-FGTVpnIpsecPhase2Interface
Show-FGTExceptionAuthor
Alexis La Goutte
Contributors
- Arthur Heijnen
- Benjamin Perrier
- Brett Pound
- Dave Hope
- Cédric Moreau
- Evan Chisholm
- Jelmer Jaarsma
- Kevin Shu
- Sylvain Gomez
Sort by name (git shortlog -s)
Special Thanks
- Warren F. for his blog post 'Building a Powershell module'
- Erwan Quelin for help about Powershell
License
Copyright 2019-2022 Alexis La Goutte and the community.