Wrong config for 868/915MHz TTGOLoRA32 v2 board

G4lile0 / tinyGS

📡 Open Ground Station Network 🛰

GNU General Public License v3.0

922 stars 176 forks source link

Wrong config for 868/915MHz TTGOLoRA32 v2 board #226

Open HelmiBeh opened 4 months ago

HelmiBeh commented 4 months ago

Please change OLED_RST to 0 (unused). The original GPIO 16 is used for Flash_CS on the board and change L_RST to 23, as the SX1276 reset is connected to GPIO23. Board worked now with this board template.

G4lile0 commented 4 months ago

thanks for the info, I changed the OLED_RST to unused, there is two different board TTGO LoRa V2, with different pinout: 868-915MHz TTGO LoRA 32 v2 --> https://github.com/LilyGO/TTGO-LORA32 868-915MHz LILYGO T3_V1.6.1 --> https://github.com/umbm/TTGO-LoRa32-V2.1-T3_V1.6 please could you try the latest version OTA 2402167 , you will find it's on the Beta firmware testing thread on Telegram and use the 868-915MHz LILYGO T3_V1.6.1 configuration.
Thanks