Slinger

Slinger is a project that allows SlingPlayer, Slingboxes and MediaPlayers to stream content:

On the same LAN
Connecting from the Internet
Fully distributed (Cloud-based)

Sticking it to the Man, one slingbox at a time

Version log

Ver. 3.08: This now supports the 240/350/500/M1/M2/Solo/Pro and ProHD

Documentation

It is highly recommended to review the following documents located in this repo as they provide more information to help you with you own setup:

Setup instructions

Obtain your SlingBox admin password
Edit the config.ini file:
1. You can select what type of slingbox you have with the sbtype = entry
Run slingbox_server.py

Bonus

The HTTP streaming server can server out mutliple simultaneous streams so more than one person can see the Sling content at once.
The web-based remote control is yet another huge hack to get something working quickly. Uses "Flask", definately can be made prettier. You can tweek the look in the [REMOTE] section of the config.ini file. You can insert any valid HTML between the buttons and change the button and text style.

To watch your slingbox

Use a media player that supports http streaming. I've tested

VLC
OBS studio
Ffplayer
Mxplayer

Just configure:

http://your_ip_address_or_FQDN:your_port_number/slingbox

Your_port_number defaults to 8080 but you can override that with the port = entry in the SERVER section of config.ini file. I.e.:

http://192.168.1.10:8080/slingbox

Important

THIS IS THE NUMBER ONE MISTAKE PEOPLE MAKE SETTING THIS UP. THE IP ADDRESS IS FOR THE HOST RUNNING THE SERVER CODE NOT THE SLINGBOX. DO NOT USE THE SLINGBOX IP ADDRESS, IT WILL NOT WORK.

YOU CONNECT TO THE SERVER TO STREAM VIDEO NOT THE SLINGBOX. IT'S THE SERVER THAT TALKS TO THE SLINGBOX AND FORWARDS THE VIDEO TO YOU. THE URL IS CASE SENSITIVE.

DO NOT USE 'Slingbox' OR ANYTHING ELSE EXCEPT 'slingbox'. "slingbox" is the default. It is now possible to change this.

Read the Release notes pdf document located in this repo.

THE [SERVER] port number is configured in the config.ini file. IT DEFAULTS TO 8080.

Some people feel compelled to change this to the same port number as the slingbox and I don't know why. It only seems to add confusion to what is happening.

Remote control

To access the Remote control functionality, use the same IP address and port number but replace "slingbox" with Remote into any ol' web browser.i.e.

http://192.168.1.10:8080/Remote

Linux/RaspberryPi Notes

You'll need a working Python3 interpreter to get going. Comes pre-installed on the Raspberry Pi distribution:

A minimum system is just less that 2G. So for safety sake use at least a 4G micro sd card Make a user "slingbox" with whatever password you'd like

    sudo apt-get update
    sudo apt-get install python3-pip

You don't need the flask module if you're not using the embedded web server to server out the Remote Control page. Disable the remote in your config.ini file set enableremote=no.

    sudo pip install flask

You don't need netifaces if you configure the slingbox ip address and port number in the config.ini file

    sudo pip install netifaces

Copy "slingbox_server.py, config.ini and sling.service to /home/slingbox

    sudo chmod +x /home/slingbox/slingbox_server.py
    sudo cp sling.service /etc/systemd/system/.
    # enable it
    sudo systemctl daemon-reload
    sudo systemctl enable sling.service
    sudo systemctl start sling.service

    sudo systemctl stop sling.service # to shut it down

The default config generates a log file /tmp/sling.log to check to see what's going on....

As root, add or modify the two following lines to your /etc/sysctl.conf

    net.core.rmem_max = 8192000
    net.core.wmem_max = 8192000

Adding your own remote

To add your own remote, please do following:

Create a new branch and follow this naming convention:

add-remote-<your-remote-name>
Add your control in the folder named CustomRemotes, name your file:

ModelRemote.txt

The branch will be reviewed and approved for merging if passed.

Notes for Windows users

There is a windows executable now available so you don't need to do a python install but your welcome to run the python code directly if you want.

I used cygwin Python on my Windows box but any windows python program should work.

You'll need flask and netifaces module for python. See note about netifaces and flask above.

Make a folder "slingbox" somewhere
Copy slinbox_server.py, config.ini and RunSling.bat to the slingbox folder

If you want to have the server start automatically on boot make a shortcut to RunSling.bat in the Startup folder.

You need to open the port your using in your firewall on the server box if it's enabled.
The port number the server binds to is set in the config.ini file, defaults to 8080.
1. If you want remote access add a port map on your firewall to redirect to your server box.

Security

Windows Defender may think there are two viruses in the slingbox_server.exe file. This is not the case. Add an exception on your system for slingbox_server.exe

PC Settings/Update & Security/Windows Security/Virus & Threat Protection/Virus & Thread protection Settings/Add or Remove Exclusions/Add an exclusion:

Enter the path to slingbox_server.exe

Apparently there is a way around this by changing the source code and then signing the executable but I haven't tested it yet.

Not getting what your expecting?

Note the Slingbox does not upscale the input, See https://www.slingbox.com/help/KB/KB-2000464 for more info.

Slingbox Video Sizes

#define SBVS_320x240    1
#define SBVS_160x120    2
#define SBVS_352x240    3
#define SBVS_176x120    4
#define SBVS_640x480    5
#define SBVS_640x240    6
#define SBVS_320x480    7
#define SBVS_128x96     8
#define SBVS_224x176    9
#define SBVS_448x240    10
#define SBVS_256x192    11
#define SBVS_1280x720   12
#define SBVS_1440x544   13
#define SBVS_1680x544   14
#define SBVS_1920x544   15
#define SBVS_1920x1080  16

Note: Resolution = 0, is AudioOnly mode.

Key Codes : For my Motorola DCX3400M PVR. 1,4,5,9,10,11,12,13,14,15,16,17,18,19,21,22,23,24,25,26,27,28,29,31,32,33,34,35,37,38,39,40,41,42,43,44,45,46,47,53,54,55,56,57,58,59,60

Slingbox Command Codes

#define SBCMD_INVALID           0
#define SBCMD_POWER             1
#define SBCMD_POWERON           2
#define SBCMD_POWEROFF          3
#define SBCMD_CHANNELUP         4
#define SBCMD_CHANNELDOWN       5
#define SBCMD_VOLUMEUP          6
#define SBCMD_VOLUMEDOWN        7
#define SBCMD_MUTE              8
#define SBCMD_NUM1              9
#define SBCMD_NUM2              10 
#define SBCMD_NUM3              11 
#define SBCMD_NUM4              12 
#define SBCMD_NUM5              13 
#define SBCMD_NUM6              14 
#define SBCMD_NUM7              15 
#define SBCMD_NUM8              16 
#define SBCMD_NUM9              17 
#define SBCMD_NUM0              18 
#define SBCMD_ENTER             19 
#define SBCMD_HUNDRED           20 
#define SBCMD_LASTCHANNEL       21 
#define SBCMD_TVVCR             22 
#define SBCMD_EXTERNAL          23 
#define SBCMD_PLAY              24 
#define SBCMD_STOP              25 
#define SBCMD_PAUSE             26 
#define SBCMD_REWIND            27 
#define SBCMD_FASTFORWARD       28 
#define SBCMD_RECORD            29 
#define SBCMD_SKIPFORWARD       30 
#define SBCMD_SKIPBACK          31 
#define SBCMD_LIVE              32 
#define SBCMD_MENU              33 
#define SBCMD_SETUP             34 
#define SBCMD_GUIDE             35 
#define SBCMD_CANCEL            36 
#define SBCMD_EXIT              37 
#define SBCMD_UP                38 
#define SBCMD_DOWN              39 
#define SBCMD_LEFT              40 
#define SBCMD_RIGHT             41 
#define SBCMD_SELECT            42 
#define SBCMD_PAGEUP            43 
#define SBCMD_PAGEDOWN          44 
#define SBCMD_FAVORITE          45 
#define SBCMD_INFO              46 
#define SBCMD_FORMAT            47 
#define SBCMD_SUBTITLE          48 
#define SBCMD_SURROUND          49 
#define SBCMD_SLOW              50 
#define SBCMD_EJECT             51 
#define SBCMD_RANDOM            52 
#define SBCMD_PIP               53 
#define SBCMD_PIPFORMAT         54 
#define SBCMD_PIPFREEZE         55 
#define SBCMD_PIPSWAP           56 
#define SBCMD_PIPMOVE           57 
#define SBCMD_PIPSOURCE         58 
#define SBCMD_PIPCHANUP         59 
#define SBCMD_PIPCHANDOWN       60 
#define SBCMD_PIPMULTI          61 
#define SBCMD_CUSTOM10          62 
#define SBCMD_CUSTOM11          63 
#define SBCMD_CUSTOM12          64 
#define SBCMD_CUSTOM13          65 
#define SBCMD_CUSTOM14          66 
#define SBCMD_CUSTOM15          67 
#define SBCMD_CUSTOM16          68 
#define SBCMD_CUSTOM17          69 
#define SBCMD_CUSTOM18          70 
#define SBCMD_CUSTOM19          71 
#define SBCMD_CUSTOM20          72 
#define SBCMD_CUSTOM21          73 
#define SBCMD_RED               74 
#define SBCMD_GREEN             75 
#define SBCMD_YELLOW            76 
#define SBCMD_BLUE              77 
#define SBCMD_WHITE             78 
#define SBCMD_CUSTOM27          79 
#define SBCMD_CUSTOM28          80 
#define SBCMD_CUSTOM29          81

GerryDazoo / Slinger

readme