xoscillo
Automatically exported from code.google.com/p/xoscillo All credits go to Raul Aguaviva
A software oscilloscope that acquires data using an arduino or a parallax (more platforms to come).
About
This is a multiplatform software oscilloscope and logical analyzer. It supports arduino(with custom firmware) and a Parallax USB oscilloscope. More platforms to come.
Features
- Panoramic view
- Load and save waveforms
- Zoom in and out
- Can open several waveforms at the same time
- Can run several oscilloscopes/logical analyzers simultaneously
- Frequency analysis using FFT
- Filtering, so far it has a low pass filter, probably more to come.
- Works on Windows and Linux (needs mono)
- Autodetects the hardware
- Post processing tools
- Decodes fsk waves
- Calculates wave main frequency using a few methods
Supported platforms
- Arduino
- Parallax
- more to come... want to add your platform?
Support
- Ask here in our forum
Screenshots
- Basic screen shot showing the oscilloscope displaying a simple waveform
- Logic analyzer screenshot
- Displays the FFT of the signal and underneath the FFT over time.
- This screen shot shows an arduino based oscilloscope and a parallax one working simultaneously in realtime.
- Linux
Notes from the Author
- The code is not by any means great, its just a quick exercise I did to learn c#.
- The program is not perfect but it works well enough though as to help many hobbyists in their small projects.
- The purpose of this project is to encourage others to contribute and improve the current code base.