G.I./Microchip SP0256 Speech Processor and CTS256A-AL2 Text-To-Speech Processor Emulation
Based on the IntelliVoice emulator by Joe Zbiciak.
Version 0.0.6-alpha.
A pre-release of the executables (Win32-x86) can be found under 'Releases'.
-r;SP0256_VS2005.sln for compatibility with VS2005
SP0256_VS2005.sln to build under VS2005;SP0256.sln to build under VS2017 (or higher -- to check).-w[wavFreq]:file.wav;-DT = trace; -DD = single-step debug, -DS = samples;Two emulators in this project:
Two programs:
They can be combined together (the output from CTS256A-AL2 serves as input for SP0256):
CTS256A-AL2 -I:README.MD | SP0256 -I-
This project can currently be built using Microsoft Visual Studio 2005 using the solution file SP0256_VS2005.sln,
or Microsoft Visual Studio 2017 and onwards using the solution file SP0256.sln.
SP0256(tm) Emulator
GI/Microchip SP0256-AL2 Narrator(tm) and SP0256-012 Intellivoice(tm) Speech Processor
This program accurately emulates the SP0256 micro-sequencer and the voice generator, using the embedded original speech ROM images. The voice generator consists of a glottal pulse and noise generator, and a 12-pole digital filter.
Two versions of the speech ROM are included:
Specify -mAL2 (default) to select the AL2 Narrator(tm) speech ROM, or -m012 to select the IntelliVoice
speech ROM.
The input can either be stdin or a file. Specify -i- to use stdin, or -iFilename to use an input file.
The format can either be ASCII (the allophone or pause labels for AL2, or the speech words for 012),
or binary (6-bit addresses - the higher bits are masked out). Specify -t for ASCII text mode (the default),
or -b for binary mode.
The output can either be the default sound output device, or a .WAV file. Specify -wWavFile to write the audio
stream to WavFile. Specify -wFreq:WavFile to generate a WAV file at a sampling frequancy other than the default.
The audio wave file format will be 8-bit PCM mono.
The XTAL frequency can also be specified via the option -xXtal, where 1000000 <= Xtal <= 5000000. The default
value for Xtal is 3120000 (3.12 MHz).
The audio sampling frequency is given by the expression Freq = Xtal / 312. So, for the default Xtal frequency of 3.12 MHz,
the audio sampling frequency will be 10 kHz. This audio sampling frequency will be the default frequency for the .WAV
file if no other value is specified via the -w option.
Some echo/verbose/debugging flags are provided:
-e to echo the generated allophones, pauses or words;-v to display more info about the generated allophones, pauses or words;-dD to trace the micro-sequencer instructions and allow single-stepping;-dT to trace the micro-sequencer instructions;-dS to display the generated waveforms.Usage:
sp0256 [-m{AL2|012}] [-e] [-v] [-xClockFreq] [ -t | -b | -a ] [ -i{inFile|-} ] [-wWavFile]
-mAL2 Select Narrator(tm) speech ROM
-m012 Select Intellivoice speech ROM
-e Echo speech elements (words or allophones)
-v Verbose mode
-d[D|S|T] Set debug for [D]ebug, [S]amples or [T]race
-xClkFreq Xtal Clock Frequency in Hz (range: 1000000..5000000)
-iInFile Say File
-i- Say from stdin: echo ... | sp0256 -i-
-t Text Mode (labels) (default)
-b Binary Mode (addresses)
-a Pronounce all words or allophones in speech ROM
-wWavFile Create .wav fileCTS256A-AL2(tm) Emulator
GI/Microchip CTS256A-AL2(tm) Code-To-Speech Speech Processor
This program accurately emulates the CTS256A-AL2 companion chip of the SP0256-AL2 speech processor, using the embedded original code-to-speech ROM image.
The input can either be stdin, or a file, or the command line. Specify -i- to use stdin, -iFilename to use
an input file, or put the text at the end of the command line, after the options.
The output is stdout. It can be piped to SP0256.exe in order to directly pronounce the allophones converted from
the input text. The format can either be ASCII (the allophone or pause labels), or binary (6-bit addresses OR-ed
with 0x40). Specify -t for ASCII text mode (the default), or -b for binary mode.
Some echo/verbose/debugging flags are provided:
-e to echo the input text;-v to echo the converted allophone labels;-d to enter debug mode.The CTS256A-AL2 normally generates the output for 'O-K' on startup. Specify -n to suppress that.
Usage:
cts256a-al2 [-iFile] [-t] [-b] [-e] [-d] [-v] [-n] [text]
-iFile Optional input filename
-t Select text output (allophone labels) (default)
-b Select binary output (range 40..7F)
-e Echo input text
-v Verbose mode
-d Debug mode
-n Suppress 'O.K.'
-- Stop parsing options
text Optional text to convert to speechIf no -ifile and no text is specified on the command line, reads input from stdin.
Example: echo Hello World. | CTS256A-AL2.exe -n | SP0256.exe -i-
Binary ROM image: https://github.com/palazzol/TMS7xxx_dumper/blob/main/software/dumps/cts256a.bin from the GitHub project: https://github.com/palazzol/TMS7xxx_dumper
http://spatula-city.org/~im14u2c/sp0256-al2/
This image has been byte-reversed. It should be de-reversed in order to
incorporate this into ivoice.c in ivoice.c in project https://github.com/libretro/FreeIntv .
http://spatula-city.org/~im14u2c/intv/tech/ivoice.html
Note that the mask ROM is Intellivoice specific, not the SP0256-AL2 !
https://github.com/libretro/FreeIntv
Note that the mask ROM is Intellivoice specific, not the SP0256-AL2 !
Front page: https://www.cpcwiki.eu/index.php/SP0256
Voice generator: https://www.cpcwiki.eu/index.php/SP0256_Voice_Generator
Allophones: https://www.cpcwiki.eu/index.php/SP0256_Allophones
Instruction set: https://www.cpcwiki.eu/index.php/SP0256_Instruction_Set
Measured timings: https://www.cpcwiki.eu/index.php/SP0256_Measured_Timings
Microchip, Inc. holds the copyrights to the SP0256-AL2 design and ROM Image, and to the CTS256A-AL2 ROM Image. Microchip retains the intellectual property rights to the algorithms and data the emulated devices SP0256 and CTS256A-AL2 contain.
Joe Zbiciak, author of the Intellivoice emulator in C language, which this SP0256 emulator is based on.
Frank Palazzolo, who designed an extractor to dump the masked ROMs of TMS7000-based devices, and published
the ROM binary image cts256a.bin.