ASR Microelectronics ASR605x (ASR6501, ASR6502): development platform for PlatformIO
This development platform is deprecated and won't receive any further updates.
Please use the heltec-cubecell development platform as the drop-in replacement:
[env:yourenv]
platform = heltec-cubecell
framework = arduino
board = your_board_id
ASR Microelectronics ASR605x series is highly integrated and ultra low power SoC based on the PSoC 4000 series MCU (ARM Cortex M0+ Core) and Semtech SX1262 transceiver.
- Home (home page in the PlatformIO Registry)
- Documentation (advanced usage, packages, boards, frameworks, etc.)
Usage
- Install PlatformIO
- Create PlatformIO project and configure a platform option in platformio.ini file:
Stable version
[env:stable]
platform = asrmicro650x
board = ...
...Development version
[env:development]
platform = https://github.com/HelTecAutomation/platform-asrmicro650x.git
board = ...
...Configuration
LoRaWAN
LoRaWAN protocol can be configured in https://docs.platformio.org/en/latest/projectconf/index.html using the following syntax
board_build.arduino.lorawan.* where * is an option from the following list:
| Option | Description | Possible values | Default |
|---|---|---|---|
region | Region definition | AS923_AS1, AS923_AS2, AU915, CN470, CN779, EU433, EU868, KR920, IN865, US915, US915_HYBRID | US915 |
|||
class | Device class | CLASS_A, CLASS_C | CLASS_A |
|||
netmode | Activation method | OTAA, ABP | OTAA |
|||
adr | Adaptive Data Rate | ON, OFF | ON |
|||
uplinkmode | Uplink confirmed/unconfirmed messages | CONFIRMED, UNCONFIRMED | CONFIRMED |
|||
net_reserve | Don't rejoin after reset | ON, OFF | OFF |
|||
at_support | AT commands support | ON, OFF | ON |
|||
rgb | RGB light for LoRaWAN status | ACTIVE, DEACTIVE | ACTIVE |
|||
preamble_length | Preamble length | 8, 16 (For M00 and M00L) | 8 |
|||
debug_level | Print LoRaWAN relevant messages print to serial port | NONE, FREQ (Sending/receiving frequency), FREQ_AND_DIO (Sending/receiving frequency and DIO pin interrupt information) | NONE |
Example
[env:cubecell_board]
platform = asrmicro650x
framework = arduino
board = cubecell_board
board_build.arduino.lorawan.region = EU433
board_build.arduino.lorawan.adr = OFF
board_build.arduino.lorawan.debug_level = FREQ_AND_DIOMore information about LoRaWAN configuration can be found in the official CubeCell documentation.