HexAirbot / HexNanoMWC_HEX

A modified MWC2.2 flight control for Flexbot hex board.

54 stars 25 forks source link

readme

HexNanoMWC_HEX

A modified MWC2.2 flight control for FlexBot hex board.

And the project is one part of the FlexBot Project.

Source Code

You can either download the source using the "Download ZIP" button at the bottom left of the github page, or you can make a clone using git:

git clone https://github.com/HexAirbot/HexNanoMWC_HEX.git

Latest release

version 1.0.3 source code

How to compile

Download the Arduino IDE (you should use the version 1.0.5+).
Put all the source files (.ino files) from this repository in a folder called HexNanoMWC_HEX.
Open the main file (HexNanoMWC_HEX.ino) with the Arduino IDE, and the IDE will automatically open the other source files.
Connect your Flexbot via USB.
Set the Board in your IDE to Arduino Leonardo Select the correct COM Port
Click the verify and then the upload button

Development

The FlexBot Project is open source.

To contribute, you can send a pull request on Github, or share your idea to the forum.

Support