MegaYume

_{-= SEGA MEGA DRIVE EMULATOR =-}

MegaYume is a SEGA Mega Drive / Genesis emulator for Parallax P2 micro-controllers with appropriate memory expansions (Currently supported: HyperRAM, 4xQPI PSRAM, 2xQPI PSRAM, 1x QPI PSRAM).

Features include:

• Low latency framebuffer-less high-level emulation
• Pretty decent FM sound
• 6 button controller support
• SRAM save support
• Video output over VGA, HDMI, YPbPr, S-video, Composite or 6bit RGB bus (ILI9342 LCD)
• Low-latency USB input (Keyboard and gamepads, see below) or direct hookup to discrete switches.

See the issues section of this GitHub repository for known issues.

Forum thread, chronicalling development and other interesting info: https://forums.parallax.com/discussion/173381/console-emulation/p1

Usage

• Make you have flexspin 6.1.6 or newer installed

• Configure memory type, pinouts and video mode in "config.spin2". In particular, read RAMCONFIG.MD for more info on.. uh.. RAM config.

• Run "build.sh".

• Load the compiled "megayume_lower.binary"

• Select your game ROM from the SD listing. If present, a "MEGAYUME" directory on the SD root will be opened by default.

• Enjoy the game! (Or not, if it's broken....)

• When playing a game with a save feature, wait at least 5 seconds for the save to be flushed to disk before powering off. Returning to the selection screen is always safe.

• You may return to the game selection by holding Start+Down for a few seconds or hitting Ctrl+Esc

• You may RESET the game by holding Start+Up for a few seconds or hitting Ctrl+R

• You may freeze the CPU by hitting Pause/Break - this is a debugging feature and may mess things up.

If you want to download some freeware ROMs to play around with, here's a couple:

• Bad Apple demo: https://www.dropbox.com/s/waa4c2cje0tegon/BadApple.bin?dl=1
• Cave Story MD: https://github.com/andwn/cave-story-md
• L'Abbaye des Morts: https://playonretro.itch.io/labbaye-des-morts-megadrivegenesis-por-002
• Old Towers: https://retrosouls.itch.io/old-towers
• Alter Ego: https://retrosouls.itch.io/alterego16bit
• Runes: https://cannibalcat.itch.io/runes
• 240p Test Suite (test pattern generator): https://artemiourbina.itch.io/240p-test-suite

USB Controllers

Many different kinds of USB controller are supported. For multiplayer, a USB Hub must be used.

The default input map is as follows:

Gamepad maps can be user configured through a PADMAP.TXT file placed in the SD card root.

Each line may have the following format:

megayume <VID and PID> <Y> <C> <B> <A> <X> <Z> <ignored> <ignored> <Mode> <Start> # <Comment>

For example:

megayume 20D6A713   4  3  2  1  5  6  7  8  9  10 # PowerA Switch controller

A mapping is detected as a 6-button controller if X, Y and Z are all mapped.

Mappings for the NeoGeo mini controller (ID 0E6F1112) and RetroBit USB controllers (ID 0F0D00C1) are built-in to MegaYume, but can still be overridden using a PADMAP.TXT rule.

For more information on PADMAP.TXT, see the usbnew documentation.

Keyboard controls can currently not be reconfigured (except by editing the source code). The keyboard always controls Player 1, independently of any connected game controllers.

MegaYume uses a modified version of usbnew for usb input support, see the usbnew wiki for info on further information on device compatibility.

Project Files