MultiPlug.Ext.Hermes

MultiPlug IPC HERMES 9852 Extension used for the transfer of PCB related data between manufacturing equipment on a electronics assembly line.

Functionality

This Extension, with the use of the MultiPlug.Ext.Network.Sockets MultiPlug Extension allows you to connect to Upstream and Downstream electronics production equipment (SMT) that are capable of communicating using the IPC-HERMES-9852 messaging standard (https://www.the-hermes-standard.info).

The modes of operation are Pass Through and SMEMA Gateway:

• The Pass Through mode allows the creation of a Hermes man-in-the-middle to capture message data which will include PCB (Printed Circuit Board) information.

• The SMEMA Gateway mode (IPC-SMEMA-9851) requires an additional hardware Extension to interface with the SMEMA I/O, eg MultiPlug.Ext.RasPi.GPIO or MultiPlug.Ext.Brainboxes . This mode allows SMEMA equipment to be upgraded and prevents PCB data from being lost as a PCB (printed circuit board) moves along an assembly line.

More Information

• MultiPlug.Ext.Hermes is not a software development library.
• Read the Wiki

Setup

1. Within Multiplug.Ext.Network.Sockets (https://www.nuget.org/packages/MultiPlug.Ext.Network.Sockets/), create a Client Socket for the Upstream machine and use its IP address and the default port 50101.
2. Within Multiplug.Ext.Network.Sockets (https://www.nuget.org/packages/MultiPlug.Ext.Network.Sockets/), create a Socket Endpoint for the Downstream machine and use the default port 50101.
3. Within Multiplug.Ext.Network.Sockets Client Socket, subscribe to the Hermes Upstream XML message send event, of MultiPlug.Ext.Hermes.
4. Within Multiplug.Ext.Network.Sockets Socket Endpoint, subscribe to Herme Downstream XML message send event, of MultiPlug.Ext.Hermes.
5. Within MultiPlug.Ext.Hermes Upstream settings, subscribe to the Client Socket read event, of Multiplug.Ext.Network.Sockets.
6. Within MultiPlug.Ext.Hermes Downstream settings, subscribe to the Socket Endpoint read event, of Multiplug.Ext.Network.Sockets.
7. Click Deploy within MultiPlug and the Event connections will be made.

Purchase a Software License

This Extension works under a 60 minute evaluation. To purchase a licence visit: https://www.smartfactorydirect.com/multiplugexthermes-software-license

Runtime Digital Twin Animation

User Interface

Setup Interface