PMG1-CY7113 BSP

Overview

The CY7113 EZ-PD PMG1-S3 Prototyping Kit is a development platform to design products which can be powered from a high- voltage USB PD port, and also need a microcontroller with CAPSENSE™ capability to implement different applications.

To use code from the BSP, simply include a reference to cybsp.h.

Features

Kit Features:

USB PD 3.0 compliant Sink which can support up to 100W (20V, 5A) of power consumption.
Support for two self-capacitance based CAPSENSE™ buttons and one 5-segment slider.
USB bus powered operation.
KitProg3 based programming and debug interface.
Access to the pins of PMG1-S3 silicon (CYPM1311-48LQXI) in hardware and support for BSP, HAL, PDL and Middleware in Modus Toolbox.

Kit Contents:

EZ-PD CYPM1311-48LQXI based board
Quick Start Guide

BSP Configuration

The BSP has a few hooks that allow its behavior to be configured. Some of these items are enabled by default while others must be explicitly enabled. Items enabled by default are specified in the PMG1-CY7113.mk file. The items that are enabled can be changed by creating a custom BSP or by editing the application makefile.

Components:

Device specific category reference (e.g.: CAT1) - This component, enabled by default, pulls in any device specific code for this board.

Defines:

CYBSP_WIFI_CAPABLE - This define, disabled by default, causes the BSP to initialize the interface to an onboard wireless chip if it has one.
CY_USING_HAL - This define, enabled by default, specifies that the HAL is intended to be used by the application. This will cause the BSP to include the applicable header file and to initialize the system level drivers.
CYBSP_CUSTOM_SYSCLK_PM_CALLBACK - This define, disabled by default, causes the BSP to skip registering its default SysClk Power Management callback, if any, and instead to invoke the application-defined function cybsp_register_custom_sysclk_pm_callback to register an application-specific callback.

Clock Configuration

Clock	Source	Output Frequency
CLK_HF	CLK_IMO	48 MHz

Power Configuration

System Idle Power Mode: Deep Sleep
VDDA Voltage: 3300 mV
VDDD Voltage: 3300 mV

See the BSP Setttings for additional board specific configuration settings.

API Reference Manual

The PMG1-CY7113 Board Support Package provides a set of APIs to configure, initialize and use the board resources.

See the BSP API Reference Manual for the complete list of the provided interfaces.

Infineon / TARGET_PMG1-CY7113

readme