JTechPhotonics J-Tech-Photonics-Laser-Tool issues

JTechPhotonics / J-Tech-Photonics-Laser-Tool

MIT License

172 stars 74 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Add options for grbl and for prepending dwell time

#94 marcvs opened 11 months ago
0
feat: Allow multi-line power on and power off command.

#93 toothwalker opened 11 months ago
1
Not working in Linux with Inkscape 1.3

#92 RWL-69 closed 8 months ago
2
Turn off tool before custom footer

#91 JuPrgn opened 1 year ago
0
Footer executed before Tool Off cmd

#90 JuPrgn opened 1 year ago
0
FeatureRequest: Add line width

#89 o-bri opened 1 year ago
0
Gcode generated via extension has wrong Y axis Coordinate

#88 lappa1 opened 1 year ago
1
Laser don't power off at the end

#87 moossaa opened 1 year ago
0
can't find '__main__' module

#86 simond98 opened 1 year ago
0
Only works with Inkscape V1.1.2

#85 Doubletop12 opened 1 year ago
0
License of the code?

#84 sumpfralle closed 1 year ago
1
Extension greyed out

#83 Doubletop12 closed 1 year ago
10
inkscape engrave - gcode and move head

#82 urobasa opened 1 year ago
1
Add line return if semi column to prevent comment

#81 Jodaille opened 1 year ago
0
Inkscape 1.2.2 Not running Jtech Photonics or Endurance Extensions, even though they show in the list

#80 JayC2469 opened 1 year ago
9
Diagonal lines are replaced by curves in generated GCode

#79 vibhoregit opened 2 years ago
0
Request: Use document size for paper size

#78 Corgano opened 2 years ago
2
NOT WORKING

#77 kurtpart opened 2 years ago
2
Traceback Error (No Gcode Generated) TypeError: stat: path should be string, bytes, os.PathLike or integer, not NoneType

#76 Liizam closed 2 years ago
6
Can't ouput Gcode

#75 phantomfsoc opened 2 years ago
1
Inkscape issue

#74 sugarl14 opened 2 years ago
1
No output file anymore

#73 1GR3 opened 2 years ago
1
Definition of origin is bugged?

#72 AlainFarigoule opened 2 years ago
3
Fixes JTechPhotonics/J-Tech-Photonics-Laser-Tool#70

#71 tfindlay-au closed 2 years ago
2
Error creating gcode

#70 dgg006 closed 2 years ago
4
KeyError: 'boolean'

#69 Paulink-sys closed 2 years ago
6
Gcode issues

#68 BallieK69 opened 2 years ago
5
Lot of useless movements

#67 Carlsans opened 2 years ago
4
After opening the preview, the plugin created the G file by itself

#66 1129915719 opened 2 years ago
2
Enhancement Request - Specify start point

#65 joeynuggetz opened 2 years ago
1
trying to genaerate code but only a few lines of gcode

#64 danaskew99 closed 2 years ago
2
Exception when start

#63 sstefanov opened 3 years ago
4
Add checkbox to reuse SVG filename for output

#62 peschmae closed 3 years ago
1
Add setting for dynamic output filename

#61 peschmae closed 3 years ago
1
Error in Output Directory! message

#60 BCChad closed 2 years ago
3
Return the submenu to its original position

#59 odaki closed 3 years ago
1
Laser tool not showing up in Inkscape v1.1 as an Extension.

#58 StevenMarston closed 3 years ago
2
No more "power-on delay" setting?

#57 rafzan opened 3 years ago
5
ModuleNotFoundError: No module named 'svg_to_gcode'

#56 dfgianni closed 1 year ago
9
Curves are being generated as a chain of lines on GCode

#55 rafzan closed 3 years ago
2
Fix type mismatch (bool)

#54 odaki closed 3 years ago
5
top-left origin always bottom-left in gcode

#53 sninaber opened 3 years ago
2
Compile with an empty body

#52 zorgoban closed 3 years ago
3
Remove several deprecations

#51 vmario89 closed 3 years ago
1
Offset in y axis

#50 agryson closed 3 years ago
3
Cannot engrave (just cutting) with grbl and inkscape

#49 dekiakbar closed 3 years ago
4
Support machine with top-left origin

#48 odaki closed 3 years ago
1
Can you add an check box to remove/add the S0 from laser off cmd?

#47 murilobaliego closed 3 years ago
3
Last cut always comes out wrong/problem with gcode gen

#46 nmeurer closed 2 years ago
7
Negative offset values?

#45 Mazvy closed 3 years ago
1