Crash after boot on Wemos Lolin32

[FauthD]

Hi, build (Arduino) and flash looked good, but it dies after boot. Currently I have not much ideas how to hunt this. And hints are very appreciated. The blink example works on this board, so environments should be ok. Perhaps I made a beginners mistake (my first esp32 project).

`Rebooting... ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0018,len:4 load:0x3fff001c,len:956 load:0x40078000,len:0 load:0x40078000,len:13076 entry 0x40078a58

00:00:00 APP: Baudrate eingestellt auf 115200

00:00:00 Projekt sonoff Sonoff (Topic sonoff, Fallback DVES_00000000, GroupTopic sonoffs) Version 5.12.0c-STAGED

Backtrace: 0x40088538:0x3ffd4460 0x40088637:0x3ffd4480 0x4008599d:0x3ffd44a0 0x4012916e:0x3ffd44e0 0x4012944e:0x3ffd4500 0x4011bc28:0x3ffd4520 0x4011a1a2:0x3ffd4540 0x4011a263:0x3ffd4560 0x4011a2d9:0x3ffd45a0 0x400d4246:0x3ffd45c0 0x400df904:0x3ffd45e0 0x40140357:0x3ffd4620

Rebooting...`

[raidolo]

Same here.... I've used the latest ESP32 core

Rebooting... ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DOUT, clock div:1 load:0x3fff0018,len:4 load:0x3fff001c,len:1324 load:0x40078000,len:7788 ho 0 tail 12 room 4 load:0x40080400,len:6448 entry 0x400806e8

00:00:00 APP: Set Baudrate to 115200

00:00:00 Project sonoff Sonoff (Topic sonoff, Fallback DVES_00000000, GroupTopic sonoffs) Version 5.12.0c-STAGED

Backtrace: 0x40090714:0x3ffb1df0 0x400908e9:0x3ffb1e10 0x4008d339:0x3ffb1e30 0x40131dde:0x3ffb1e70 0x4013210a:0x3ffb1e90 0x40121c1c:0x3ffb1eb0 0x40121c85:0x3ffb1ed0 0x401299c5:0x3ffb1ef0 0x401299ea:0x3ffb1f10 0x4012072f:0x3ffb1f30 0x400d42f2:0x3ffb1f50 0x400dfccc:0x3ffb1f70 0x401534ab:0x3ffb1fb0 0x4008c739:0x3ffb1fd0

Rebooting...