creality-Sonic-pad-issues

Hi my name is Jamie. I'm having some issues with creality Sonic pad Homing

[safe_z_home] home_xy_position:

A X, Y coordinate (e.g. 100, 100) where the Z homing should be

performed. This parameter must be provided.

speed: 50.0

Speed at which the toolhead is moved to the safe Z home

coordinate. The default is 50 mm/s

z_hop:

Distance (in mm) to lift the Z axis prior to homing. This is

applied to any homing command, even if it doesn't home the Z axis.

If the Z axis is already homed and the current Z position is less

than z_hop, then this will lift the head to a height of z_hop. If

the Z axis is not already homed the head is lifted by z_hop.

The default is to not implement Z hop.

z_hop_speed: 15.0

Speed (in mm/s) at which the Z axis is lifted prior to homing. The

default is 15 mm/s.

move_to_previous: False

When set to True, the X and Y axes are reset to their previous

positions after Z axis homing. The default is False.

//Stops on x