JaneliaSciComp spoke issues

JaneliaSciComp / spoke

Live display of neural spike data for SpikeGLX software

Other

1 stars 1 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Speed up channel tab display switching

#38 vijayiyer05 opened 5 years ago
0
Spoke Readme is out of date

#37 davidackerman closed 5 years ago
1
Spikes arent' detected or plotted for some period following stimulus in certain raster mode cases

#36 davidackerman closed 5 years ago
1
RefreshPeriodMaxWaveformRate doesn't appear to fully limit processing time in Raster Mode

#35 vijayiyer05 closed 5 years ago
1
Support Imec3b & NI combination

#34 vijayiyer05 opened 5 years ago
0
A flat artifact (apparently zero-valued in volts) appears prior to detected threshold-artifacts

#33 vijayiyer05 opened 5 years ago
1
Live changes of waveformsPerPlot produce errors and/or don't get applied

#32 vijayiyer05 closed 5 years ago
1
Restore stim event classification

#31 vijayiyer05 opened 5 years ago
0
Plot most recent waveform in different color in Waveform mode

#30 vijayiyer05 opened 5 years ago
0
Show units & values of axes on all, or at least, one plot

#29 vijayiyer05 opened 5 years ago
0
Simultaneous waveform & raster plot mode

#28 vijayiyer05 opened 5 years ago
0
Use clearer marker for Raster plots

#27 vijayiyer05 opened 5 years ago
1
Show last N trials in Raster mode

#26 vijayiyer05 opened 5 years ago
0
Add option to plot spike-free trials in Raster mode

#25 vijayiyer05 opened 5 years ago
0
Common-mode noise rejection for neural channels

#24 vijayiyer05 opened 5 years ago
0
Support multiple stimulus detections during the refreshPeriod

#23 vijayiyer05 opened 5 years ago
2
Physical channel grid layout

#22 vijayiyer05 opened 5 years ago
0
Lag at Start of Raster Mode

#21 davidackerman opened 5 years ago
1
Feature issue0002 (R2016a compatibility)

#20 vijayiyer05 closed 5 years ago
0
Update SpokeModel.m

#19 vijayiyer05 closed 5 years ago
0
Decouple spikeRefractoryPeriod default from horizontalRange in raster mode

#18 vijayiyer05 closed 5 years ago
1
Bugfix psth range

#17 davidackerman closed 5 years ago
0
PSTH XLim is not set by default

#16 davidackerman closed 5 years ago
0
Update SpokeModel.m

#15 davidackerman closed 5 years ago
0
Spikes accumulated faster than they should given refresh rate

#14 davidackerman closed 5 years ago
2
Use more physiological units (microvolts, milliseconds)

#13 vijayiyer05 opened 5 years ago
2
Raster plot lines miss some spikes at end sometimes when refreshRate is low

#12 davidackerman closed 5 years ago
1
Cap spike rate via decimation, especially in raster mode

#11 vijayiyer05 closed 5 years ago
1
waveformsPerPlot cap not honored within refreshPeriod

#10 vijayiyer05 closed 5 years ago
1
First stim-triggered waveform doesn't appear w/ rmsMultiple display units

#9 davidackerman closed 5 years ago
1
Error w/ filter applied when sglChanSaves is a subset of available channels

#8 vijayiyer05 closed 5 years ago
1
Threshold line shouldn't appear when in stim-triggered waveform mode

#7 vijayiyer05 closed 5 years ago
0
Verify case (displayUnits = 'volts'; thresholdUnits = 'rms'; spike-triggered waveform)

#6 vijayiyer05 closed 5 years ago
2
Threshhold line shouldn't appear in stim-triggered waveform mode

#5 davidackerman closed 5 years ago
0
Support SpikeGLX Channel Maps

#4 vijayiyer05 opened 5 years ago
2
Filter being applied to non-neural channels

#3 davidackerman closed 5 years ago
3
Recent MATLAB compatibility (beyond R2016a)

#2 vijayiyer05 closed 5 years ago
3
Baseline Imec support

#1 davidackerman closed 5 years ago
1