Problem with upload code in serial mode

Lauszus / Sanguino

Sanguino add-on for the Arduino IDE, based on http://code.google.com/p/sanguino/

https://lauszus.github.com/Sanguino/

185 stars 96 forks source link

Problem with upload code in serial mode #5

Closed fdalforno closed 10 years ago

fdalforno commented 10 years ago

Hi Lauszus i have burn successfully your bootloader in a ATMEL 644PA but when i try upload code in a serial mode i receive a strange error:

avrdude: stk500_paged_write(): (a) protocol error, expect=0×14, resp=0×64 avrdude: Send: V [56] @ [40] . [00] . [00] . [0c] [20] avrdude: Recv: avrdude: stk500_cmd(): programmer is out of sync

Lauszus commented 10 years ago

Try to unplug it from the USB and plug it in again. That usually helps. Also make sure that you have selected the correct board in the menu.

fdalforno commented 10 years ago

It works, tanks a lot :D.

2013/11/15 Kristian Sloth Lauszus notifications@github.com

Try to unplug it from the USB and plug it in again. That usually helps.

— Reply to this email directly or view it on GitHubhttps://github.com/Lauszus/Sanguino/issues/5#issuecomment-28574999 .