Closed thedansu closed 10 months ago
Looks like each of the inner cutout sketches are dimensioned with the correct wall thickness except for the final one, adding 0.7mm to the label tab side, resulting in too thin of a wall when extruded/cut.
thanks for creating the issue, I was able to reproduce it, looks like it is caused by extra offset created by scoop
fixed in v1.2.6.0
The wall thickness above the label tab is smaller than the specified amount, leading to an awkward overhang. I generated a bin with 1.2 mm wall thickness but above the label tab, the wall is only 0.5mm.