search

LeeOtts / Ender3v2-Klipper-Configs

Welcome to the repository that houses meticulously crafted configuration files for a modified Ender 3 V2 printer, complete with the Sprite Pro Extruder, CR Touch, and a 4.2.7 silent board. These configuration files are specifically designed to empower you with unrivaled control and precision. Due to popular demand I recently added a 4.2.2 config.
https://lotsof3d.com
106 stars 15 forks source link

Use with 4.2.2 board #15

Closed jeremy-niles closed 7 months ago

jeremy-niles commented 8 months ago

Hi Lee,

What would need to be changed to use this package with a 4.2.2 board? Thanks!

prodestrian commented 8 months ago

I have an Ender 3 V2 running the stock 4.2.2 board, with a CRTouch and Sprite Extruder.

I was able to install these configuration files just now (with a few features disabled such as KAMP...for now) and can confirm it's looking good so far, I don't actually see any obvious differences between the instructions for 4.2.2 and 4.2.7.

Klipper has successfully connected to my printer and it's showing the current temperatures. Next up I need to run some calibrations, then see if I can get a print going.

Edit: I take that back, as soon as I tried to home the bed nothing happened. Turns out the pins on 4.2.2 are different, as per #8 I copied over the step_pin and dir_pin settings from here and that fixed it: https://github.com/Klipper3d/klipper/blob/master/config/printer-creality-ender3-v2-2020.cfg