Welcome to the repository that houses meticulously crafted configuration files for a modified Ender 3 V2 printer, complete with the Sprite Pro Extruder, CR Touch, and a 4.2.7 silent board. Due to popular demand I added a config file for a 4.2.2 board. These configuration files are specifically designed to empower you with unrivaled control and precision.
In this repository, you will find four essential configuration files: printer.cfg
, macros.cfg
, Adaptive_Meshing.cfg
, Line_Purge.cfg
. These files have been expertly tailored to optimize the performance of your modified Ender 3 V2 printer, enabling you to push the boundaries of print quality, accuracy, and speed.
printer.cfg
file seamlessly integrates with the popular Mainsail interface, making it effortless for you to incorporate these configurations into your existing setup. Simply copy and paste the contents into your own printer.cfg
file via Mainsail.KAMP is a project that was created by kyleisah to simplify the usage of adaptive meshing on Klipper-based 3D printers. Adaptive meshing is the practice of using values from a gcode file to define a mesh's dimensions. This gives you the benefits of using a bed mesh, but only specifically where it is needed, without passing a bunch of variables around. KAMP was designed with simplicity in mind!
Find out more about Kamp, https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging
To embark on this journey of enhanced printing capabilities, follow these steps:
Clone or download this repository to obtain the printer.cfg
, macros.cfg
, Line_Purge.cfg
, and Adaptive_Meshing.cfg
files.
If you are using Mainsail, copy and paste the contents of the printer.cfg
file into your existing printer.cfg
file.
add the following files to the same directory as the printer.cfg
file:
macros.cfg
, Line_Purge.cfg
, and Adaptive_Meshing.cfg
You will also need to ensure the following is defined in moonraker.conf:
[file_manager] enable_object_processing: True
Replace the slicer's custom start and end g-code scripts with:
Starting G-Code: START_PRINT BED_TEMP={material_bed_temperature_layer_0} EXTRUDER_TEMP={material_print_temperature_layer_0}
Ending G-Code: END_PRINT
Enjoy the benefits of Klipper firmware and witness the remarkable improvements in your printing endeavors.