1.45 not working on hiveos (ETH/TON) - Githubissues

Lolliedieb / lolMiner-releases

2.54k stars 577 forks source link

1.45 not working on hiveos (ETH/TON) #1272

Closed shmox75 closed 2 years ago

shmox75 commented 2 years ago

Hi devs, upgrading to 1.45 on hiveos gives issues 0mh/s all the time. Downgrading to 1.44 works well. Please note that I'm using DUAL ETH/TON

jgonzis commented 2 years ago

Hi devs, upgrading to 1.45 on hiveos gives issues 0mh/s all the time. Downgrading to 1.44 works well. Please note that I'm using DUAL ETH/TON

Thanks for giving which Pool are you using...

We found that for ton-pool in 1.45 parameter --ton-mode 2 need or use the new pool address wss://eu1.stratum.ton-pool.com/stratum

And for people mining in Nicehash stratum : --ethstratum ETHV1 need it too.

shmox75 commented 2 years ago

Hi devs, upgrading to 1.45 on hiveos gives issues 0mh/s all the time. Downgrading to 1.44 works well. Please note that I'm using DUAL ETH/TON

Thanks for giving which Pool are you using...

We found that for ton-pool in 1.45 parameter --ton-mode 2 need or use the new pool address wss://eu1.stratum.ton-pool.com/stratum

And for people mining in Nicehash stratum : --ethstratum ETHV1 need it too.

Hi, I'm using icemining Pool. If I'm not wrong it's using stratum+tcp protocol

jgonzis commented 2 years ago

Hi devs, upgrading to 1.45 on hiveos gives issues 0mh/s all the time. Downgrading to 1.44 works well. Please note that I'm using DUAL ETH/TON

Thanks for giving which Pool are you using... We found that for ton-pool in 1.45 parameter --ton-mode 2 need or use the new pool address wss://eu1.stratum.ton-pool.com/stratum And for people mining in Nicehash stratum : --ethstratum ETHV1 need it too.

Hi, I'm using icemining Pool. If I'm not wrong it's using stratum+tcp protocol

So then I hope you show your config or the start of the miner... to have some more information

shmox75 commented 2 years ago

Hi devs, upgrading to 1.45 on hiveos gives issues 0mh/s all the time. Downgrading to 1.44 works well. Please note that I'm using DUAL ETH/TON

Thanks for giving which Pool are you using... We found that for ton-pool in 1.45 parameter --ton-mode 2 need or use the new pool address wss://eu1.stratum.ton-pool.com/stratum And for people mining in Nicehash stratum : --ethstratum ETHV1 need it too.

Hi, I'm using icemining Pool. If I'm not wrong it's using stratum+tcp protocol

So then I hope you show your config or the start of the miner... to have some more information

jgonzis commented 2 years ago

Hi devs, upgrading to 1.45 on hiveos gives issues 0mh/s all the time. Downgrading to 1.44 works well. Please note that I'm using DUAL ETH/TON

Thanks for giving which Pool are you using... We found that for ton-pool in 1.45 parameter --ton-mode 2 need or use the new pool address wss://eu1.stratum.ton-pool.com/stratum And for people mining in Nicehash stratum : --ethstratum ETHV1 need it too.

Hi, I'm using icemining Pool. If I'm not wrong it's using stratum+tcp protocol

So then I hope you show your config or the start of the miner... to have some more information

Your problem is in flightsheet. You cannot connect to eth pool. Share the flightsheet without wallets if you can

chudykrzys commented 2 years ago

I have got the same problem. Lolminer can't connect to eth pool. The same configuration works with V1.44

Connected to daggerhashimoto.eu-north.nicehash.com(172.65.216.96):3353 (TLS enabled) Error: Handshake failed with message stream truncated Lost connection to stratum server daggerhashimoto.eu-north.nicehash.com:3353 or server not reachable. Trying to connect in 5 second(s)

screenshot-2022-02-16-18-46-58

jgonzis commented 2 years ago

I have got the same problem. Lolminer can't connect to eth pool. The same configuration works with V1.44

Connected to daggerhashimoto.eu-north.nicehash.com(172.65.216.96):3353 (TLS enabled) Error: Handshake failed with message stream truncated Lost connection to stratum server daggerhashimoto.eu-north.nicehash.com:3353 or server not reachable. Trying to connect in 5 second(s)

I have got the same problem. Lolminer can't connect to eth pool. The same configuration works with V1.44

Connected to daggerhashimoto.eu-north.nicehash.com(172.65.216.96):3353 (TLS enabled) Error: Handshake failed with message stream truncated Lost connection to stratum server daggerhashimoto.eu-north.nicehash.com:3353 or server not reachable. Trying to connect in 5 second(s)

Only add in extra parameters, it is an open bug that is will be solved soon: --ethstratum ETHV1

shmox75 commented 2 years ago

Hi devs, upgrading to 1.45 on hiveos gives issues 0mh/s all the time. Downgrading to 1.44 works well. Please note that I'm using DUAL ETH/TON

Thanks for giving which Pool are you using... We found that for ton-pool in 1.45 parameter --ton-mode 2 need or use the new pool address wss://eu1.stratum.ton-pool.com/stratum And for people mining in Nicehash stratum : --ethstratum ETHV1 need it too.

Hi, I'm using icemining Pool. If I'm not wrong it's using stratum+tcp protocol

So then I hope you show your config or the start of the miner... to have some more information

Your problem is in flightsheet. You cannot connect to eth pool. Share the flightsheet without wallets if you can

jgonzis commented 2 years ago

Hi devs, upgrading to 1.45 on hiveos gives issues 0mh/s all the time. Downgrading to 1.44 works well. Please note that I'm using DUAL ETH/TON

Thanks for giving which Pool are you using... We found that for ton-pool in 1.45 parameter --ton-mode 2 need or use the new pool address wss://eu1.stratum.ton-pool.com/stratum And for people mining in Nicehash stratum : --ethstratum ETHV1 need it too.

Hi, I'm using icemining Pool. If I'm not wrong it's using stratum+tcp protocol

So then I hope you show your config or the start of the miner... to have some more information

Your problem is in flightsheet. You cannot connect to eth pool. Share the flightsheet without wallets if you can

My rig is working same config. I suppose is something around a firewall. Why you don't try to use the SSL port? Screenshot_20220216-220417_Chrome

shmox75 commented 2 years ago

Hi devs, upgrading to 1.45 on hiveos gives issues 0mh/s all the time. Downgrading to 1.44 works well. Please note that I'm using DUAL ETH/TON

Thanks for giving which Pool are you using... We found that for ton-pool in 1.45 parameter --ton-mode 2 need or use the new pool address wss://eu1.stratum.ton-pool.com/stratum And for people mining in Nicehash stratum : --ethstratum ETHV1 need it too.

Hi, I'm using icemining Pool. If I'm not wrong it's using stratum+tcp protocol

So then I hope you show your config or the start of the miner... to have some more information

Your problem is in flightsheet. You cannot connect to eth pool. Share the flightsheet without wallets if you can

My rig is working same config. I suppose is something around a firewall. Why you don't try to use the SSL port?

Hi, I'm not using a firewall, and 1.44 is working well with the same config. May I ask you how to use SSL port ?

jgonzis commented 2 years ago

Hi devs, upgrading to 1.45 on hiveos gives issues 0mh/s all the time. Downgrading to 1.44 works well. Please note that I'm using DUAL ETH/TON

Thanks for giving which Pool are you using... We found that for ton-pool in 1.45 parameter --ton-mode 2 need or use the new pool address wss://eu1.stratum.ton-pool.com/stratum And for people mining in Nicehash stratum : --ethstratum ETHV1 need it too.

Hi, I'm using icemining Pool. If I'm not wrong it's using stratum+tcp protocol

So then I hope you show your config or the start of the miner... to have some more information

Your problem is in flightsheet. You cannot connect to eth pool. Share the flightsheet without wallets if you can

My rig is working same config. I suppose is something around a firewall. Why you don't try to use the SSL port?

Hi, I'm not using a firewall, and 1.44 is working well with the same config. May I ask you how to use SSL port ?

Just select in the ethermine server ssl. It will end in 5555