search

Lolliedieb / lolMiner-releases

2.55k stars 575 forks source link

1.33 3060ti windows #769

Open bilemedimki opened 3 years ago

bilemedimki commented 3 years ago

I used this version for 1 hour on windows . nvidia driver 472.12 . My mh rate is low. sometimes 10mh. I could never go above 39 mh. I can get 41 mh with t-rex.

"" problem solved in new version (1.34) thanks ""

jgonzis commented 3 years ago

Which values is getting, could you show a Screenshot after sometime to see values?.

Could you also add in bat file EXTRAPARAMETERS the run as administrator--cclk 1400

mexarrinha commented 3 years ago

i have the same problem. I see people on youtube with normal hashrate 40/41mh on eth with lhr cards.. That's what i get on Trex. With lolminer i can't get that. Its tunning for 5 to 10 minutes and hashrates goes down and down, sets the autotune to -60 or so and the hashrate goes to 0 Tried locking CC tried not locking CC, nothing works. When i don't overclock the memory it works and stays at 33mh lolminer

jgonzis commented 3 years ago

i have the same problem. I see people on youtube with normal hashrate 40/41mh on eth with lhr cards.. That's what i get on Trex. With lolminer i can't get that. Its tunning for 5 to 10 minutes and hashrates goes down and down, sets the autotune to -60 or so and the hashrate goes to 0 Tried locking CC tried not locking CC, nothing works. When i don't overclock the memory it works and stays at 33mh lolminer

You should need to put any parameter with 1.33 it should do it all automatic

mexarrinha commented 3 years ago

Tried it both ways and nothing

SoundPeople commented 3 years ago

I have an 3060ti to CC fixed 1050 MC +1400 Powerlimit 59 Fan 80% With this Setup i got 43-45mhs stable 24/7 For 120 real watt But i read about cards they Crashes over +900 on MC, they cant get more Like 38-40mhs No issues

SoundPeople commented 3 years ago

Tried it both ways and nothing

You can fix youre CC on an stable value with Handling the curved Editor, make with curved Editor a Line, Not a curve ;)

mexarrinha commented 3 years ago

My zotacs can't go above 1000 on afterburner they crash. But even on 1000 the miner doesn't stabilize. It sets autotune value of - a massive number. I like the constant power draw from lolminer but i Just can't get it to work

jgonzis commented 2 years ago

Could you try new 1.48?