SX1301 reference board with version 1.2.x of library

Lora-net / lora_gateway

Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.

Other

913 stars 741 forks source link

Closed sylvain-miermont closed 8 years ago

sylvain-miermont commented 10 years ago

When using version 1.2.x of the library, the SX1301 is not fully supported:

sensitivity is bad (eg. -127dBm for SF12/125kHz, instead of -141dBm) due to gain settings being optimized only for the FPGA-based board
the multi-SF RX channels 4 to 7 are not usable
the RSSI value is not properly calibrated and has an offset of 11 dBm

Support for SX1301 boards is scheduled for version 1.3 and beyond.

borud commented 8 years ago

So is this issue closed?

mcoracin commented 8 years ago

Yes, issue closed.