Joysick Library does not contain a valid library.

[Bigboy0310]

Description of Issue

Enter description of issue here. Include a clear and concise description of what you expected to happen and what actually happened. I downloaded the joystick library and tryed to include it in the arduino ide. But it sayd that Specified folder/zip file does not contain a valid library.

Technical Details

• Arduino Board (e.g. Arduino Leonardo): Pro micro
• Host OS (e.g. Windows 10): windows 10
• Arduino IDE Version (e.g. 1.8.3): 1.8.3 and i tryed 1.6.6

Sketch File that Reproduces Issue

//BUTTON BOX //USE w ProMicro //Tested in WIN10 + Assetto Corsa //AMSTUDIO //20.8.17

include

include

define ENABLE_PULLUPS

define NUMROTARIES 4

define NUMBUTTONS 24

define NUMROWS 5

define NUMCOLS 5

byte buttons[NUMROWS][NUMCOLS] = { {0,1,2,3,4}, {5,6,7,8,9}, {10,11,12,13,14}, {15,16,17,18,19}, {20,21,22,23}, };

struct rotariesdef { byte pin1; byte pin2; int ccwchar; int cwchar; volatile unsigned char state; };

rotariesdef rotaries[NUMROTARIES] { {0,1,24,25,0}, {2,3,26,27,0}, {4,5,28,29,0}, {6,7,30,31,0}, };

define DIR_CCW 0x10

define DIR_CW 0x20

define R_START 0x0

ifdef HALF_STEP

define R_CCW_BEGIN 0x1

define R_CW_BEGIN 0x2

define R_START_M 0x3

define R_CW_BEGIN_M 0x4

define R_CCW_BEGIN_M 0x5

const unsigned char ttable[6][4] = { // R_START (00) {R_START_M, R_CW_BEGIN, R_CCW_BEGIN, R_START}, // R_CCW_BEGIN {R_START_M | DIR_CCW, R_START, R_CCW_BEGIN, R_START}, // R_CW_BEGIN {R_START_M | DIR_CW, R_CW_BEGIN, R_START, R_START}, // R_START_M (11) {R_START_M, R_CCW_BEGIN_M, R_CW_BEGIN_M, R_START}, // R_CW_BEGIN_M {R_START_M, R_START_M, R_CW_BEGIN_M, R_START | DIR_CW}, // R_CCW_BEGIN_M {R_START_M, R_CCW_BEGIN_M, R_START_M, R_START | DIR_CCW}, };

else

define R_CW_FINAL 0x1

define R_CW_BEGIN 0x2

define R_CW_NEXT 0x3

define R_CCW_BEGIN 0x4

define R_CCW_FINAL 0x5

define R_CCW_NEXT 0x6

const unsigned char ttable[7][4] = { // R_START {R_START, R_CW_BEGIN, R_CCW_BEGIN, R_START}, // R_CW_FINAL {R_CW_NEXT, R_START, R_CW_FINAL, R_START | DIR_CW}, // R_CW_BEGIN {R_CW_NEXT, R_CW_BEGIN, R_START, R_START}, // R_CW_NEXT {R_CW_NEXT, R_CW_BEGIN, R_CW_FINAL, R_START}, // R_CCW_BEGIN {R_CCW_NEXT, R_START, R_CCW_BEGIN, R_START}, // R_CCW_FINAL {R_CCW_NEXT, R_CCW_FINAL, R_START, R_START | DIR_CCW}, // R_CCW_NEXT {R_CCW_NEXT, R_CCW_FINAL, R_CCW_BEGIN, R_START}, };

endif

byte rowPins[NUMROWS] = {21,20,19,18,15}; byte colPins[NUMCOLS] = {14,16,10,9,8};

Keypad buttbx = Keypad( makeKeymap(buttons), rowPins, colPins, NUMROWS, NUMCOLS);

Joystick_ Joystick(JOYSTICK_DEFAULT_REPORT_ID, JOYSTICK_TYPE_JOYSTICK, 32, 0, false, false, false, false, false, false, false, false, false, false, false);

void setup() { Joystick.begin(); rotary_init();}

void loop() {

CheckAllEncoders();

CheckAllButtons();

}

void CheckAllButtons(void) { if (buttbx.getKeys()) { for (int i=0; i<LIST_MAX; i++)
{ if ( buttbx.key[i].stateChanged )
{ switch (buttbx.key[i].kstate) {
case PRESSED: case HOLD: Joystick.setButton(buttbx.key[i].kchar, 1); break; case RELEASED: case IDLE: Joystick.setButton(buttbx.key[i].kchar, 0); break; } }
} } }

void rotary_init() { for (int i=0;i<NUMROTARIES;i++) { pinMode(rotaries[i].pin1, INPUT); pinMode(rotaries[i].pin2, INPUT);

ifdef ENABLE_PULLUPS

  digitalWrite(rotaries[i].pin1, HIGH);
  digitalWrite(rotaries[i].pin2, HIGH);
#endif

} }

unsigned char rotary_process(int _i) { unsigned char pinstate = (digitalRead(rotaries[_i].pin2) << 1) | digitalRead(rotaries[_i].pin1); rotaries[_i].state = ttable[rotaries[_i].state & 0xf][pinstate]; return (rotaries[_i].state & 0x30); }

void CheckAllEncoders(void) { for (int i=0;i<NUMROTARIES;i++) { unsigned char result = rotary_process(i); if (result == DIR_CCW) { Joystick.setButton(rotaries[i].ccwchar, 1); delay(50); Joystick.setButton(rotaries[i].ccwchar, 0); }; if (result == DIR_CW) { Joystick.setButton(rotaries[i].cwchar, 1); delay(50); Joystick.setButton(rotaries[i].cwchar, 0); }; } }

Sketch file goes here (if applicable)

Wiring Details

Any pin wiring details that may be relevant.

Additional context

Add any other context about the problem here.

[Trollepoten]

Had the same problem, first extract the Zip file into a normal map. When selecting the file for the library only select the 'joystick' map

[MHeironimus]

This issue should be fixed in Version 2.0.6.